The best
Air Conditioner Accessories:
Reddit reviews
From 3.5 billion Reddit comments
The best of Air Conditioner Accessories by number of unique Reddit comments:
Top Reddit reviews mentioning Air Conditioner Accessories:
They make deflectors for air vents. You might have to look around for one that fits properly.
i went back through my history just to find this for you https://www.amazon.ca/HOOMEE-Universal-Window-Portable-Conditioner/dp/B07C986TBQ/ref=sr_1_12?dchild=1&keywords=Hatch+window+ac+hose+adapter&qid=1624338088&sr=8-12
Have you tried this? We only have windows near the floor that open out like a little hatch so our hose adapter thing didn’t work in our new place, but just put this on and it works like a charm. Just measure your window and buy the size that’s large enough to fit the whole thing. It’s a little confusing at first to put on but if I can figure it out anyone can. Very easy to get on/off, can still close the window and you can always just unzip it to let the breeze in if you want.
Someone else was asking the same question other day, I looked into a portable one recently. I'll paste the comment here.
> I did investigations into portable aircon last year when it was hot but couldn't get one, however I've still got the money set aside because my flat is like an oven in the summer. I looked into it again earlier today because it's been warm the last few days. I found the Midea units to be highly rated in my research last year, here's where you can get one. Obviously adjust based on how big your place is and how many rooms, my place isn't big and I only really want it for the living room. You'll also want something like this to seal the window otherwise it'll be useless.
There are adapters available, but really if the building has central AC it should be turned on at a reasonable time of the year and this really shouldn't be necessary. Especially with so many more people stuck home. I know the last building I lived in with central AC, they would schedule the turn on at a certain time every year and it was almost impossible to change since other buildings also had theirs scheduled and wouldn't cancel early especially if it actually got hot. There were quite a few years where the first heat wave we had to make do with fans, but more where it wasn't an issue, of course this was all during "normal" times and not with everyone stuck at home.
There are different thicknesses. The Duck max strength is 1.5mil. Weighs a bit more, but I’ve been using the same piece for a couple of years.
Hey! I have a stupid outwards crank window at my apartment and this is what we bought to use. The picture shows a crank window that goes in, but ours goes out and it works just fine.
>Res windows at UBC have a hopper opening, which is very difficult to fix a vent to
Not living on res rn but I have a similar window opening where I live rn. If you do manage to get a portable AC, this window seal has been a live saver for me, highly recommend.
Honestly, especially given this heat wave, it'd be incredibly petty for Housing to cause a problem over this. AC literally saves lives. Do what you need to do.
Are you sure? What kind of windows do you have? I just showed someone else this and changed their own opinion about whether AC was doable for them, so do you have these kinds of windows? https://www.amazon.ca/HOOMEE-Universal-Window-Portable-Conditioner/dp/B07C986TBQ/ref=sr_1_12?dchild=1&keywords=Hatch+window+ac+hose+adapter&qid=1624338088&sr=8-12
I did investigations into portable aircon last year when it was hot but couldn't get one, however I've still got the money set aside because my flat is like an oven in the summer. I looked into it again earlier today because it's been warm the last few days. I found the Midea units to be highly rated in my research last year, here's where you can get one. Obviously adjust based on how big your place is and how many rooms, my place isn't big and I only really want it for the living room. You'll also want something like this to seal the window otherwise it'll be useless.
Also recommend the Heavy Duty 1.5mil Polycryo - it’s halfway between regular (0.7mil) polycryo and Tyvek in weight and bulk.
I personally find Tyvek to seep water at pressure points, eg, kneeling on spongy wet ground, or used as a groundsheet on ice.
I can't help you with your specific question, but thought I'd drop a link since this is what I use for my casement windows, so I'm not sure if it will work for you as well.
Buy an extra long portable AC hose from Amazon if you need it, and hire a handyman to install the kit as best as possible. No need for a contractor, and I can't think of a store that would send help for this type of thing.
You could also just let the hose hang outside the window, and the AC will probably be able to overcome the infiltration from the window. That's all the kit is for, to seal up the window from letting extra heat in from the outside or the hose itself. Alternatively you could prevent infiltration by pointing a fan at the open window with the hose hanging out of it, to keep the air moving from inside to outside. You'll want to put the AC away in a couple months anyways. It's a tricky situation.
Edit: I also found this thing. A handyman could install that for you.
You can buy a window seal for it (also works for windows that open outwards). The window film didn’t help with the heat in my west-facing condo.
Ah brilliant! Funny it doesn't even tell you the material on their page..... But I found a review stating they had used it under a tent!
This one looks decent and the right size
$20 is a lot more reasonable.
That's what I used, except the thicker one. It works well!
There's a kit you can buy for $20 on amazon that's basically airlock sheeting with velcro on it. That's what I used for my side opening window. Plexiglass would better I guess but obviously expensive.
But why? Slickdeals.net shows mini-splits running as low as $500~ for precharged, and those are better for long term installs cooling than a portable a.c..
...
There are casement window adapters for portables, too, and these are easy enough to fabricate on your own.
https://www.amazon.com/HOOMEE-Universal-Window-Portable-Conditioner/dp/B07BPZGJ3B
Okay good idea. Any tips for insulating the windows with our portable units? We’re currently using these and I’m wondering if they are just letting in too much hot air?
Our window is much more awkward, and this works flawlessly.
Did you screw it into the window?
The bracket goes outside, underneath.
There are ones you don't need to drill or permanently attach -- https://www.amazon.com/Ivation-Conditioner-Mounting-Support-Bracket/dp/B07CZH178M
Also the interior is a clean way to secure it AND be able to use the window. You get a metal strop the side of the inside of the window frame, resting against the frame, with the window open.
Then you screw that top bar of the ac into the metal bar. Voila, now you can use the window (above the ac) and it's more secure.
Like this pic -- https://www.bbcond.com/wp-content/uploads/2019/07/o-27-1.jpg
That metal bar on the top is just resting against the inside. The window frame is white, behind it. Then you screw the ac to the metal bar. Damages nothing, you can use the window, keeps it more secure.
It's about twice as expensive as the last time I bought it, but heavy duty polycro is plenty durable and you can pretty easily make a bathtub groundsheet out of it. I have been using one sheet for the past two years/ 2300 miles, and despite a few holes I've patched it is still going strong.
Still though, I wouldn't expect a groundsheet to survive literal bath tub conditions and still keep you dry. Try to learn from this experience and not pick sites that are prone to flooding, rather than solve this with new gear.
Honestly , if you want a “real” solution here is what I would do : 1. Get to know my neighbor a bit , don’t bring it up on the 1st convo . 2. After a few convos bring it up , ask them if they would consider installing a compressor sound dampening blanket like : this
This would cost 150 or so DIY and a few hundred for a pro . Asking them to move it , is at least a 1500-2000 ask .
This blanket won’t be perfect but it will help , I would add on top of that someone else’s suggestion of leave another window open across the house and use a fan to move the air in to your room .
https://www.amazon.com/Brinmar-SBUHD-Universal-Fit-Conditioner-Compressor/dp/B008J5H6I2
most higher SEER units have the blanket around the compressor.. this is how they can lower the decibel level to 65-ish. I had them on my units .. it was $50 a piece before. It helps reducing the noise when you have the units next to the window
Product similar to this might help you. There are many in Amazon.
Maybe try this
Or this
Can't vouch for if they work well. Good luck
I got an LG 11,000 BTU portable AC unit last year after the heat dome. It does a decent job keeping my bedroom cool (west facing so I get the afternoon sun).
I had to get a casement window kit (specifically this one) so that I could put the hose through the window and not have giant gaps where hot air can come in. The kit isn't ideal (to be honest, it sucks and the adhesive is a pain to get rid of), but I think it's better than not having the window kit.
I like the Heavy Duty Polycryo which is 1.5mil vs the standard 0.7mil polycryo - it’s about half the bulk/weight of Tyvek. Also found Tyvek will seep water at pressure points (consistent with breathability/hydrostatic head) on spongy wet ground - test it by kneeling on a wet sponge if that’s a risk where you camp.
I use a mid-tent with solo inner net tent (SMD Serenity), and found 3F UL makes a solid wall inner of similar shape/size for ~$70 something.
amazing thank you! can you possibly link to what this product would entail? is it like this?
​
This?
Gulrear Portable AC Window Seal, Window Seal For AC Unit, Air Conditioner Window Kit White 400CM/158Inch Hot Air Stop Air Exchange Guards With Zipping And Adhesive Fastener https://www.amazon.com/dp/B01IXWL72G/ref=cm_sw_r_cp_api_i_HZMYGQF0ZS9FZBPX57EJ