The best Automotive Turn Signal Lights: Reddit reviews

From 3.5 billion Reddit comments

Here's the link to the amazon store page. These signals were easy to install; the only issue I have with them is the cord that plugs into them doesn't click into place like it should. The brightness is about the same as the stock signals.

and for the side mirror indicator lights.

https://www.amazon.com/gp/product/B07QXJJ7V5/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

I put amber LED bulbs, in my TLX and they look red when flashing. The housing of the TLX is really thick the amber doesn’t shine through.

I personally use OXILAM and stand by their brand. I installed these on my TLX and didn’t need resistors. I’ve left my turn signals on for 10mins+ in 100 degree weather and never experienced hyper flash.

OXILAM 7440 AMBER LED

here's a set of 4 for $16. https://www.amazon.com/Kinstecks-Motorcycle-Indicators-Flowing-Motorbike/dp/B07PJJ9CXD/ref=sr_1_6?crid=1X44ENS21FM7H&dchild=1&keywords=turn+signals+motorcycle+universal&qid=1611338751&sprefix=turn+signals%2Caps%2C202&sr=8-6

Just installed these yesterday. They are low profile and look great. Let me know if you need more info.

[New Version]Kinstecks 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike https://www.amazon.com/dp/B07SZDDZFJ/ref=cm_sw_r_cp_api_glc_fabc_pbgcGb7AXFDS6?_encoding=UTF8&psc=1

u/Little_tuna turns out even your tiny lights were too big for the Ducat with R&G Tail Tidyi + 780FZ rails - the rails literally cover up the hole where the turn indicators are supposed to plug in. As a result, I ended up buying an LED strip which I pasted and zip-tied for good measure to the top case attachment plate. I had to buy adapters to convert the bare wires to the Ducati turn signal plugs.

I soldered the negative lead from the LED strip to both negative wires from the two adapters, and each positive lead from the adapters to the left and right wires, and since I had the stock brake light still there (and couldn't find a decent adapter for it), I just heat shrink tube wrapped the brake light off.

Total cost was about $20 plus shipping, and it actually works!

Nice, congrats!

I'm in the same boat as you with both of those issues. I'm definitely going to swap the fuse. Those DRLs are a bit too bright to stay on for too long. I'll try 15.

I got these bulbs from Amazon: https://www.amazon.com/dp/B07Q8RZRZV?ref=ppx_pop_mob_ap_share. They're not a great fit, but they're good enough for now. They weren't very secure in the sockets, but I drove around yesterday and went over some speed bumps, etc. and they were fine. I'm definitely going to get a different one before going off road.

I read on some other forums that you can make a 7440 work in a 7440NA socket by shaving down the base a little bit. I'm still trying to find the right replacement, so if you find a good LED that works, let me know!

Load balance for the VA, OR use resistors. I wanted the full LED effect, so I went for the balance. I did not want to add resistors to my trunk. Unbalanced was a rave party style hyper flash. Front is super easy to access, anyway.

I have the LED head unit up front, so it was a simple pop out and in from the trunk this round.

Amazon.com: OXILAM 7440 LED Bulbs Amber Yellow 4000LM for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free T20 7440NA 7441 W21W WY21W Blinker Bulb Replacement (2PCS) : Automotive

I’ve found a similar set, the brake lights don’t flash though.

https://www.amazon.com/Version-Kinstecks-Motorcycle-Indicators-Motorbike/dp/B07SZDDZFJ/ref=mp_s_a_1_1?crid=3N9E441K0Y691&keywords=sequential+turn+signal+flashing+brake+lights+for+motorbike&qid=1667119144&sprefix=sequential+turn+signal+...

On my D-Class I installed this LED strip on the frame below my seat: https://www.amazon.com/dp/B07W8L4VGR?psc=1&ref=ppx_yo2ov_dt_b_product_details Required a 12v step-down converter, a control switch and a flasher relay, but the results are phenomenally bright. (Plus I installed some HELLA motorcycle horns that are nice and loud too!) Here are some pics I posted a couple weeks back: https://old.reddit.com/r/ebikes/comments/wqpgj6/dclass_with_some_modifications/

Black Turn signals can be found here! You’ll want to get some 3M double sided tape as well as they will not snap in. Have put these on my ST and now RS and love the look

I just did it couple days ago. What worked for me is that all you have to to is squeeze bullet connectors a bit to get a snug fit on to the pins. They come with plastic sleeves so + & - wont touch. Then just electrical tape around to secure it and wa la. Used these for 17$ works great. Note: that you will need a relay. https://www.amazon.com/Kinstecks-Motorcycle-Indicators-Motorbike-Waterproof/dp/B07DBN9GFN/ref=mp_s_a_1_4?crid=3VKWZJZMFWLDB&keywords=motorcycle+led+turn+signals&qid=1655679921&sprefix=motorcycle+led+tu%2Caps%2C155&sr=8-4

I used this brake light I took the chance and it is really bright, not bad for a cheapo. Even though it does have integrated turn signals, I still added these smaller ones from Revzilla. They fit in the original holes no problem, it is hard to see in the picture because the size and its dark. They are bright as well. I used Bondo for the hole where the original brake light was and painted over it, I taped under the hole and filled it up and sand it down after it dried.

Buy these immediately. Took me 10 minutes to install each one. LED Turn Signal Light Mirror Indicator Replacement for VW Golf 7 MK7 GTI 2015+ (Black) https://smile.amazon.com/dp/B07QXJJ7V5/ref=cm_sw_r_apan_i_2Y96N913X73WQGP2K3AE?_encoding=UTF8&psc=1

Exactly! It was literally plug and play. The hardest part was disassembling the mirror. Link here.

It’s an $11 Amazon tail light, here’s the link if you’re looking for it

Link

LivTee Universal 8" Flexible LED Light Strip with Tail Brake Stop Turn Signal Lights All-in-one for Motorcycle Scooter Quad Cruiser Off Road, Red/Amber https://www.amazon.com/dp/B07W8L4VGR/ref=cm_sw_r_cp_api_i_ZVR8HF5ZRYGSMYNH4PAW?_encoding=UTF8&psc=1

OXILAM 7507 PY21W BAU15S LED Bulbs Amber Yellow 2800LM for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free 2641A 12496 7507AST Bulb Replacement (2PCS) https://www.amazon.com/dp/B07RMX2XK6/ref=cm_sw_r_apan_glt_fabc_EN5SXZNYX0YXE0EZVTS9?_encoding=UTF8&psc=1

They're canbus bulbs

OXILAM 7507 PY21W BAU15S LED Bulbs Amber Yellow 2800LM for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free 2641A 12496 7507AST Bulb Replacement (2PCS) https://www.amazon.com/dp/B07RMX2XK6/ref=cm_sw_r_apan_glt_fabc_EN5SXZNYX0YXE0EZVTS9?_encoding=UTF8&psc=1

OXILAM 7440 LED Bulbs Amber Yellow 2800LM for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free T20 7440NA 7441 W21W WY21W Blinker Bulb Replacement (2PCS) https://www.amazon.com/dp/B07Q8RZRZV/ref=cm_sw_r_cp_api_glt_fabc_TY1X4TAT1N5SBASN3Y8Q?_encoding=UTF8&psc=1

Found it on Amazon. I fabricated a piece of metal that I mounted on to the tail end of my fender for me to install it onto because I wanted it to be right below the fender and follow its curvature so it could look more natural and conceal the wire better. I also had to rewire the backend to sync it with my turn signals and have it be a taillight also LED taillight

I ordered these: LED Turn Signal Light Mirror Indicator Replacement for VW Golf 7 MK7 GTI 2015+ (Black) https://www.amazon.com/dp/B07QXJJ7V5/ref=cm_sw_r_cp_api_glt_fabc_E2MPDHEXEYY6E098RNZR

Fingers crossed that I don’t crack a mirror or the cap.

OXILAM 7440 LED Bulbs Amber Yellow 2800LM for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free T20 7440NA 7441 W21W WY21W Blinker Bulb Replacement (2PCS) https://www.amazon.com/dp/B07Q8RZRZV/ref=cm_sw_r_cp_api_glt_fabc_JYBNGR3XCKW6QGBYJNGP?_encoding=UTF8&psc=1

There are a bunch of options. I got this one from Amazon, was rated well. Took 20 minutes with a screw driver, torx, and a pair of plyers.

LED Turn Signal Light Mirror... https://www.amazon.ca/dp/B07QXJJ7V5?ref=ppx_pop_mob_ap_share

Link to the bulbs if anyone is looking. Video showing how to change the bulbs.

They have worked perfectly without having to splice in a resistor, resistor is built in to the bulb, so they have never hyperflashed.

It is actually pretty easy to do. If you're interested, [these are the bulbs](oxilam 7507 py21w bau15s led bulbs amber yellow 2800lm for turn signal lights with build-in load resistor canbus error free 2641a 12496 7507ast bulb replacement (2pcs) https://www.amazon.com/dp/B07RMX2XK6/ref=cm_sw_r_apan_glt_fabc_JA6MYVZTVT6K1VRX1VZT?_encoding=UTF8&psc=1) I used, and this video shows how to install.

I personally wouldn't spend over $100 for this. I got mine off Amazon with next day shipping. It's been almost 2 years and they still work fine.

I'm sure you've been asked this already, but how's the LED turn signal bulbs? I'm highly interested in getting the ones you linked.

This one specifically : OXILAM 7440 LED Bulbs https://www.amazon.com/dp/B07Q8RZRZV/ref=cm_sw_r_apan_glt_fabc_GZPE85HMC6KEGM75MZHP

If you have it, have you had any hyper flashing since owning it?

Thanks!

So I'm running both turn signals off the resistors but I'm not sure what in parallel means here is a link to similar LEDs maybe flowing is a batter word, either way they dont seem to need a relay to flicker on and off

on Amazon, are these ones: https://www.amazon.com/dp/B0756Z8PLZ/?coliid=I1FKUGESUBUCIX&colid=IOZJNHMNO5MA&psc=1&ref_=lv_ov_lig_dp_it

I got some Chinese ones from Amazon (so something similar to those Aliexpress ones) but smoked so they blend in even more when off (Carbon steel grey and Pinnaloy forged carbon fiber caps). Personally I love the understated look and they're bright af tbh when in operation. They also have other options like transparent which are closer to the Osram I guess.

LED Turn Signal Light Mirror Indicator Replacement for VW Golf 7 MK7 GTI 2015+ (Black) https://www.amazon.com/dp/B07QXJJ7V5/ref=cm_sw_r_cp_api_glt_fabc_WN89P2JRGM6PCGESMAA1?_encoding=UTF8&psc=1

One thing to note is that the light doesn't extend into the little square that's inside the mirror that you can see while driving (OEM just let's light bleed through that hole to show when the light is on). It's not a dealbreaker to me since you still have the turnsignals on inside the car, plus the sound.