Of course! It's *supposed* to be a monitor stand:
https://smile.amazon.com/gp/product/B00AJHCQD8/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
u/SoDakZak
Close! It's this one (a little longer): https://smile.amazon.com/gp/product/B00AJHCQD8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Big boy for the 49 widescreen: Ergotron 45-475-216 HX Desk Mount... https://www.amazon.com/dp/B01N5FTCJE?ref=ppx_pop_mob_ap_share
lil boi for the 20s: Mount-It! Triple Monitor Mount |... https://www.amazon.com/dp/B06X9D7JWP?ref=ppx_pop_mob_ap_share
Dunno about triple arms...I'll be looking for those when the time comes and not sooner.
My dual arm mount: https://www.amazon.com/gp/product/B00MIBN71I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
I have a 2 shedding animals and haven't found this to be too much of an issue, as long as you keep it a bit off the carpet (I use these) and your case has decent filters, and you clean them occasionally of course.
Sorry. I didn't see your comment.
https://www.amazon.com/gp/product/B0155LJATK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018MT6ZEK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I use these mounts. One for each monitor.
Big boy for the 49 widescreen: Ergotron 45-475-216 HX Desk Mount... https://www.amazon.com/dp/B01N5FTCJE?ref=ppx_pop_mob_ap_share
lil boi for the 20s: Mount-It! Triple Monitor Mount |... https://www.amazon.com/dp/B06X9D7JWP?ref=ppx_pop_mob_ap_share
It's this one right here. It was also the only arm on Amazon that I've seen hold up this beast lol.
I bought one on Amazon that was rated for 33 lbs. Also read reviews looking for people who used it with my monitor.
https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apa_glt_fabc_4KV2Y7M74MTYZ3KQH184
Thanks for the kind words! I also like how well it fits. I measured the wall-span at 96" and I think the ~~countertop~~desk top came in at like 90" or so.
EDIT: countertop is 98" and the space was 106".
The monitor mounts are these ones from Amazon and I highly recommend them.
A pretty cheap one from Amazon
https://www.amazon.de/gp/product/B01MR397OH/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
You can get a monitor stand to lift your PC off the floor/carpet. I have wood floors but I still wish I got one a lot sooner. Got mine off of Amazon
This is the arm:
Ergotron Desk Monitor Arm White https://www.amazon.co.uk/dp/B01N5FTCJE?ref=ppx_pop_mob_ap_share
And this is the heavy duty head needed for the G9:
HX Heavy-Duty Tilt Pivot BWT https://www.amazon.co.uk/dp/B08P53X9PF?ref=ppx_pop_mob_ap_share
This the one I got before: https://smile.amazon.co.uk/gp/product/B01MR397OH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This the one I use now because I cannot use a clamp: https://smile.amazon.co.uk/gp/product/B08C712DGL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It's an Ergotron HX and I would buy it again. The arm is firm but you can easily move it around, tilt and do what not, also the white colour looks kind of nice.
Here you go! monitor stand (Amazon)
It’s really awesome. I wasn’t sure it would be possible, but Amazon recommended it as a bundle when I selected two of those monitors.
Here’s a link to the stand: AmazonBasics Premium Dual Monitor Stand - Lift Engine Arm Mount, Aluminum https://www.amazon.com/dp/B00MIBN71I/ref=cm_sw_r_cp_apip_KnEbgnDfZRgvK
Can anyone recommend a good dual monitor arm that supports up to 28"+? I have been eyeing the Amazon Basics one but it's pricey and I'm not sure if I'll get the full benefit of all the features. I have an Acer Predator 27" and a Asus PB287Q 28".
I have tried using my AmazonBasics arm on CRG9; it don't work.
the weight limit is really close already and plus I add couple stuff on top of the monitor. So that might be the reason why or maybe I just lost the quality control on the amazon basica arm. Too many factors
but either way officially CRG9 monitor IS over the weight amazon arm supports.
I got Loctek D7L for $130 from Amazon(https://www.amazon.com/Loctek-Monitor-Spring-Weighting-13-2-33/dp/B01BXP9LT6/ref=sr_1_3) which supports up to 33lbs. this one holds the CRG9 but I did have to tighten the 'increase tension' on one of the parts to make the monitor not keep sagging so on that one part there is no extra room to adjust; I had to tighten it all the way.
Bottom is LGGK950F - 34 in 21:9 IPS 144hz. Top is LGGK650F - 32 in 16:9 VA 144hz, mounted on a Vivo extra tall VESA stand from Amazon
If I was starting over from scratch I'd have gotten a slightly smaller top monitor (it's held securely but just a little wobbly even when cranked down, and the pixel density is slightly mismatched with the UW) but I already had the 650F as my main display.
I went with a similar setup but decided not to stress the tall stand so much by only putting my top monitor on it and keeping the dual monitor stand at eye level for the bottom two. Had this since Jan, no issues straight as an arrow still with a 27".
https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The arm doesn't actually support the 49 inch 33lbs monitor, it hangs facing down but I put two screws in to prevent it of doing that. An easy fix and cheap monitor arm for both the bottom and middle
The bracket it comes with doesn't actually hold it in place, it hangs down a little bit but the way it's built you can put 2 screws inside of it to prevent it hanging down. Hard to explain,, but you can find my Review with a picture of it
This is the package I bought off amazon. It's cheap but it is very sturdy and easy to setup, I definitely recommend this!
This is the stand I bought. The instructions are not written very well, but it comes with a tempered glass bottom (black) that acts as the counterbalance. When I first got it I was worried about it's stability, but it's been really stable for me. Even when raising and lowering the desk, I don't really see it move.
Here's a link to the one I got, for reference... super easy to install and very sturdy.
​
Thank you!
Sure, I'll link you the product on amazon (italian one, sorry).
https://www.amazon.it/gp/product/B01MR397OH/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
​
It's the best and cheapest solution I could find around, very clean and functional.
The monitor mount clamps onto the desk. I placed some rigid cardboard in between to protect the desk. I got them on Amazon:
I’ve had zero issues but apparently neck pain can be an issue LOL. (Thanks to all for looking out) I play on controller and mainly use the bottom screen for gaming. It’s 1440 at 165hz. The top is for movies when I lie back fully in the chair. It’s 4K at 60hzdual monitor stand