The best
Fume & Smoke Extractors:
Reddit reviews
From 3.5 billion Reddit comments
The best of Fume & Smoke Extractors by number of unique Reddit comments:
![KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]](https://m.media-amazon.com/images/I/41zSWi9+zeL._SL500_.jpg)
Top Reddit reviews mentioning Fume & Smoke Extractors:
I have used these:
They work well enough, but because of the filter you have to have it pretty close to your face. That filter limits a ton of airflow. I have also used these:
The brand I used was Hakko, but on amazon they didnt have it pictured with the hose. That hose makes it a lot easier to keep your ventilation convenient and out of the way and also provides a stronger suction so you don't have to sit as close.
Look at soldering fans that have activated carbon filters. They'll catch the fumes/smells and catch some of the grease in the air (get extra filters).
I don't worry too much about the lead solder. Its the fumes from the flux that I vent to the outdoors. You can open a window or door and use a fan to move the fumes. There are fume extractors available that suck it into a charcoal filer. https://www.amazon.com/Weller-WSA350-Bench-Smoke-Absorber/dp/B000EM74SK
I'm sure there are other manufacturers of the same type of device.
Hi Zigsphere! Sounds like you need a desktop fume extractor - you can find a variety of them online for anywhere from $35-$70.
Here’s one that’s reasonable for price and size:
KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station https://www.amazon.com/dp/B07VWDN29F/ref=cm_sw_r_cp_api_glc_fabc_m8a8FbFFJGZSM
Here’s the one that I own and use: (it’s a bit big but it chugs along great!)
Valtcan Solder Smoke Absorber Fume Extractor Fan https://www.amazon.com/dp/B07HPZ3FF6/ref=cm_sw_r_cp_api_glc_fabc_s-a8FbAS43C05?_encoding=UTF8&psc=1
Do you need a big one? Nah, I wouldn’t sweat it. Go with what works for you! Good luck!
Have you tried something like a solder fan fume thing? It has a filter that absorbs the smoke so its not just blowing around in your room
Not sure if that will be enough for your sensitivity but thats what I have
This is one of my favorite things. They're heat resistant but don't cover your entire hand making it hot
https://www.amazon.com/gp/aw/d/B09V6ZKPL2/ref=ox_sc_saved_image_8?smid=A3I09HGZF1BYUV&psc=1
And this is very important. It's to make sure she's not breathing in fumes
I recommend the Kotto with the HEPA filter https://www.amazon.com/dp/B07ZHH5H7N?psc=1&ref=ppx_yo2ov_dt_b_product_details
Works great for my need and budget friendly. You probably should also get an air purifier for the room, just an option but it helps cut down the flux and other stuff like dust IMO. With the Kotto fume extractor and air purifier I rarely smell any flux in the room and it's a small space about 100sqft with only 1 Window and it's cold now so I don't open it. You can wear a 3M respirator that the painter use but if you have family members around you should consider something that filter instead of just blowing the fume around.
This is a little spendy, but I got it a few weeks ago and am very happy with it. I started with this cheaper one, but you can't always get your work close enough to it.
I went with a rebrand of the fume extractor Dave showed in the following video. It works really well for me. They show up as "XF-180" on eBay. They're not really cheap, but you should be able to save a bit by making an offer.
https://www.youtube.com/watch?v=ffaiKZMU0Lw
This smaller Kotto unit is complete junk:
https://www.amazon.com/KOTTO-Soldering-Absorber-Electric-Extractor/dp/B07ZHH5H7N/
Depending on your ventilation (and honestly you might have something off camera we can't see) I'd consider getting something like this and use it while soldering:
https://smile.amazon.com/KOTTO-Soldering-Absorber-Electric-Extractor/dp/B07ZHH5H7N/
I have that one and have been fairly happy with it. There are also cheaper ones without the tubing. Or build your own with some carbon filtering and a fan.
I just bought a fume extractor meant for soldering. I got this one from Amazon US. It works pretty well. Here's the UK listing, not sure why it's more expensive there.
You might be able to find something more reasonable on other sites.
It's this one by Kotto! It does the job pretty well but you definitely need to keep the intake close to the project.
do you have enough plugs and a budget to get this type of fan? I found it cheaper in the past, so maybe someone sells it for less than $70 xD, but this is what I have seen to combat the issue you are talking about if you are burning at a temperature that is high enough to create smoke
You’re still going want to have some sort of air circulation in the room. The fume extractor is going to pull the fumes away and filter out some of the VOCs, but not all of them. You’d ideally need a fume extractor with a HEPA filtration system, but they can be expensive.
Also, I’ve had experience with the FA400 and it was terrible. The only way it was able to pull any fumes away is if it was literally on top of what ever I was soldering. I use this guy and it has been amazing for me.
i’m glad i bought one. i can’t imagine inhaling the fumes is very good you you. i bought this one and am happy with it. i like that this one is small and still works well. i returned a larger one i bought because it was too clunky.
Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter https://www.amazon.com/dp/B08FCMH3VF/ref=cm_sw_r_cp_api_i_XP3AK9RYEHD3GZ7FW4SQ?_encoding=UTF8&psc=1
Hi, Several views and opinions here all with merit of course. First off I would defo get the stock cover back on or you will see failed prints with the resin hardening etc. Do try the two little filters. Most of them on Amazon now come with filters installed as well as two spares in the box so you should get decent mileage out of them. The only thing is to keep them charged up and mine charge slower than a really slow thing lol. Depending on budget and to get an off the shelf solution which IMHO should remove pretty much all of the stray odour would be to get a Solder Fune Extractor and if it does not come with a nicely finished tube end then either just cut a hole for the tube or print/buy a nice adapter to give it that polished look. Something along these lines, If you shop around you can get them at around $100 if not cheaper but it may be worth hitting Amazon up for one to see if does the job and then sourcing a cheaper one 😉.
I'm in the UK but these are much cheaper everywhere else on the planet...
KOTTO Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction https://www.amazon.co.uk/dp/B07ZHH5H7N/ref=cm_sw_r_awdo_D692H4FMFT9SKF2FGTDW
It is all down to budget if any of course but as mentioned by others on here I would definitely put your Ender back in its home, use the stock cover on the AnyCubic and work your solution on that. For one you well no longer have to worry about any UV getting to your resin. Secondly, you are going to have to move far far less air than you currently do in that large enclosure. Most likely half your problem to be honest.
Hopefully the above Extractor may give you a few more ideas even if you want to build your own solution.
The very best of luck and do let us all know how you get on! 😊👍🏻
Vape into a soldering fine extractor? I haven’t tried it with the little ones but nothing comes out of the big ones. I figure if their carbon filters catch flux vapor they can handle a bit of aerosolized glycerine easily. well solder fume extractor Beyond that just hold it in a little longer. That’s what I do in the car to avoid fogging it up since I don’t like driving windows down.
You should exhaust the fumes, if you’re doing it professional there are real deal expensive solutions but I just use a small setup for home near a window and that works well for me
I use this one
Masks won’t help reducing exposure to solvent. Any good mask will reduce dust exposure.
She’s going to need a good elastomeric mask with the proper solvent filters.
Another idea is a solder station air filter. This is a small fan with a charcoal filter that draws away fumes and particles.
Solder Fume Extractor - MUIN 3 Stage Filtration Solder Smoke Absorber for Soldering and Wood Burning,Portable Soldering Fume Extractor Fan for Soldering Station (Black) https://www.amazon.com/dp/B08HYZYZZX
Or she could stop with her nails. Health seems much more important than fashion.
What about this? Solder Fume Extractor - MUIN 3 Stage Filtration Solder Smoke Absorber for Soldering and Wood Burning,Portable Soldering Fume Extractor Fan for Soldering Station (Black) https://www.amazon.com/dp/B08HYZYZZX/ref=cm_sw_r_apan_glt_i_MV1AK43TFX23AXCPTG0Z
Yeah like this:
https://www.amazon.com/Weller-WSA350-Bench-Smoke-Absorber/dp/B000EM74SK
It doesn't have to be that fancy though, even something like a stubby flat sided extension of the frame would work to help direct the airflow into the fan.
And to keep with the color scheme, I highly recommend it's partner in crime, the FA-400 fume extractor.
Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber https://www.amazon.com/dp/B00FZPSEY4/ref=cm_sw_r_apan_glt_fabc_8F602ZA0BHFETQQ3HJC2
Or the substantially better (but seriously more expensive) FA-430 fume extractor:
Hakko FA430-KIT1 Smoke Absorber with C1571 https://www.amazon.com/dp/B018KORZ3C/ref=cm_sw_r_apan_glt_fabc_XRC55AGVZ975YPQWGBN3
Just checked the Video (Jen's Favorite Things) and it was actually a Kotto as well.
Here's a link: Kotto Fume Extractor
I picked up one of these at the local Micro Center store. Seems to work well. I didn’t see these still listed on their website it I would have included that link as well.
I don't solder anymore due to the way I manufacture my keyboards now, but when I did, I made sure to have a fan blowing in the room. As far as I understand, the quantities of solder fumes you get from doing a hobby project here and there are well below hazardous levels. However, to be especially safe, you can purchase a solder fume filter (example on Amazon). I haven't tried them but they are probably a good precaution and are relatively cheap. Here is a good resource for further reading on safe soldering practices.
I had the same concerns, and bought this. It's not too noisy, is easily positioned, sucks the fumes away to a charcoal filter, and keeps me from breathing them directly. I feel safer.
Lead turns into gas at around 1750 degrees celsius. Soldering at 350 degrees celsius does not release any lead vapor.
For the flux vapor, the higher the soldering temperature the more vapor is released. Lead solder has a lower melting point, thus less harmful vapor (unless you crank up the iron temperature to the same level, then there is not much difference).
Breathing in the vapor is far more dangerous than trace amounts that will be deposited in your bedroom. If it is not well ventilated then invest in a fume extractor like this https://www.amazon.com/Absorber-Remover-Extractor-Prevention-Soldering/dp/B07VWDN29F/ref=mp_s_a_1_3?dchild=1&keywords=Fume+Extractor+Soldering&qid=1619992193&sr=8-3
If it is well ventilated then don't worry about it. Just avoid breathing the smoke. My technique is to take a deep breath when I pick up the iron, then breath out slowly while the smoke is being released.
I've got a room in the basement where I work, no windows or ventilation. I've got a fan that I use when I'm soldering, I think this one.
Every time I have a physical, I have them test for lead. So far, it comes up with nothing. I wash my hands when I'm done, but really don't take any other precautions.
I got one of these and the results have been great. You have to position it close to the work you’re doing, not just near your desk, but it’s working great for extracting fumes and keeping them out of your face and lungs.
KOTTO Fume Extractor https://www.amazon.com/dp/B07ZHH5H7N/ref=cm_sw_r_cp_api_glt_fabc_1JK4ANQBBM93JSKG4QFW?_encoding=UTF8&psc=1
Some other things that have helped me recently.
Safety glasses are a must! Getting a clipped component lead to the eye is not fun.
Get a desk lamp. Don’t rely on overhead lighting to light your work area.
Keep your work area out of the way and vacuum the floor regularly if people (or you) may be walking around it without shoes.
Remember to wash your hands before eating, chewing your nails, touching your face, looking up something on your phone. If your work area can be physically touched by anyone, make sure everyone knows to wash their hands thoroughly if they touch anything on your desk. Make a sign if you have to.
this is what I use it’s ok if you have a decent size room but I don’t do enough work to warrant the $1500+ fume extractor