Adding onto this, if you're picking up an impact driver then you need impact bits, and this set is worth every penny.
I've had it for about a year now and have used maybe half of the bits for various tasks and haven't broken any yet. Sheathed my whole garage in plywood with the T25 bits and didn't strip a single screw.
I know they do & explicitly describe it. I just wanted to branch out and give Milwaukees a whirl. Gluing a hex shank onto a drill bit after removing a bit from a lathe couldn't be much more complex then setting a program to cut a hex shank out of keystock then desired bit size.
> Wera 136000
Thanks a million! Ended up grabbing /u/paul_the_builder's link which is a bit cheaper than Wera and looks to be about the same length as the one bit I needed (plus some extra bits)
Sorry, most of the ones that come up when you search "1/4" socket hex adapter" come out at like 2"+ long. /u/Paul_The_Builder's link above shows the different sizes, and it looks like the far left one is a perfect length for a replacement
I'm using Bosch cobalt.
Makita XPS bits are very good. I don't know if they are called "XPS" in Europe (I'm in USA) but they have a lot of different bit kits available. To get every bit you want you might have to get a few different kits, they're usually around $30 USD per kit so your budget should allow to you get a few kits.
Get a metal drilling bit (i used a step bit, but you can just use something like these(https://www.amazon.com/Bosch-CO14B-Pc-Cobalt-Drill/dp/B07Q9HNTBH/ref=sr\_1\_11?gclid=CjwKCAjw2rmWBhB4EiwAiJ0mtZU3x\_jO2OzyD\_W1pgR3Iep3q2Ej9a97Y\_y284O52cRDg8\_Ez0p61BoCMYgQAvD\_BwE&hvadid=282549330448&hvdev=c&hvlocphy=9021462&hvne...) and an impact driver. I used that, hardware cloth and Sheetmetal screws along with chicken wire, then threw rocks around the side. Basically the same metal foundation on our TOUGHSHED.
Center punch and/or small pilot hole.
In a rough material like OSB its really tough to get an accurate pilot hole - the screw or bit will want to wonder into the nearest crevice in the surface of the wood.
I would suggest trying out self centering drill bits. You stick up what you want to screw in (gate latch or whatever) and the bits will self center in the hole to give you a centered pilot hole. I use them all the time for mounting shelfs and brackets and whatnot, and they work great.
In a world where most screws I touch are either Phillips, square or pozi, I use the P2R2 bit. It works for P1, P2, S1, S2 and pozi in one bit. It’s a damn marvel. BOSCH ITP2R2105 5 Pc. 1 In. Phillips/Square #2 Impact Tough Screwdriving Bit https://www.amazon.com/dp/B06XYCQRV5/ref=cm_sw_r_cp_api_glt_i_FGR30DACV2M645SH1J4R
I just drilled some holes with a Vertex frame to a island top that I bought from Home Depot. I got my frame centered on the top and don't forget to account for any peripherals that you plan to attach to the bottom of the desk.
I used this self centering drill bits after I setup my frame and left it as "template". Then it's less measuring to take place and can be used as a pilot hole.
I took the hole drilling a step further and used EZ Lok threaded inserts so I can bolt my frame to my top. It's not necessary but something I chose to do.
This kit will do most everything you’ll need for the foreseeable future. Pick up one of these bit sets and you’ll be golden:
Impact XPS Impact Bit Set https://www.amazon.com/dp/B085DZ9G14/ref=cm_sw_r_cp_api_glt_fabc_4J99A7PZZK54QFBVGDYG
I use a special tool, and a technique.
Drill and attach one screw, then the second, and so on.
I use a tool called a Vix Bit, but there are knockoffs now. I have a full set in various sized. They ensure that the screw hole is centered in the hole for the hardware. Here's the Bosch version - https://smile.amazon.com/Bosch-Clic-Change-Self-Centering-Assortment-CC2430/dp/B0000TZX1M
Deal link: Amazon
Category-wise subreddits for Amazon Deals:
Is your reddit feed getting flooded with deals for products you are not interested in? Below are our category-wise subreddits where I crosspost from the main sub.
Category | Subreddit |
---|---|
Electronics | /r/Deals_Electronics |
Computers and Accessories | /r/Deals_Computers |
Video Games | /r/Deals_VideoGames |
Home Improvement | /r/Deals_HomeImprovement |
Clothing and Accessories | /r/Deals_Apparel |
Grocery | /r/Deals_Grocery |
Discord Server: Instant deal notifications on our Discord Server!
Amazon Canada Deals: /r/OnlineDealsCanada
Disclaimer: The deal links are affiliated. We may earn a small share on qualifying purchases. It does not affect the deal price in any way.
Deal link: Amazon
Category-wise subreddits:
Is your reddit feed getting flooded with deals for products you are not interested in? Below are our category-wise subreddits where I crosspost from the main sub.
Category | Subreddit |
---|---|
Electronics | /r/Deals_Electronics |
Grocery | /r/Deals_Grocery |
Video Games | /r/Deals_VideoGames |
Home Improvement | /r/Deals_HomeImprovement |
Clothing and Accessories | /r/Deals_Apparel |
Discord Server: Instant deal notifications on our Discord Server!
Amazon Canada Deals: /r/OnlineDealsCanada
Disclaimer: The deal links are affiliated. We may earn a small share on qualifying purchases. It does not affect the deal price in any way.
Ah I see. Hmm.. yeah I've only seen those as a part of larger kits like this. Couldn't find any individual ones.
If you really struggle, you could use a self-centering drill bit like in the link below. You don't need to mark drill points, you would hold the bracket against the wall, allow the self cenetring mechanism to align the drill bit for you, and then drill. https://www.amazon.co.uk/Bosch-CC2430-Clic-Change-Self-Centering-Assortment/dp/B0000TZX1M
BLACK+DECKER 20V MAX Cordless Drill / Driver with 30-Piece Accessories (LD120VA): For under $60, you can't beat this kit!
I would consider myself to be an "around the houser" when it comes to using tools. I'm not doing any voluntary DIY projects, but hanging pictures, fixing door handles, putting together furniture (you get the picture) is normal for me.
After reading through different reviews on Amazon and watching youtube videos I decided on the Black and Decker and I'm very happy with my purchase.
Pro's
- The battery life is great, I've never done anything where I needed to stop halfway through to charge the battery (plus you can get spares). I think another reviewer said it lasted him around 4 hours.
- The torque is great. I've never had one problem drilling or removing screws.
- Hard to explain, but I feel as if I have more control over the speed / power im putting out vs my old dewalt drill.
- Relatively lightweight and ergonomically designed.
Neutral -
- The accessories are decent. The bits seem like cheapish steel to me, but the assortment is nice to have / I saw it as a bonus anyways.
Cons -
- There are no glaring cons, assuming the fact that you treat this like the starter kit it is. But It's not the most powerful drill, isn't the most complete kit, doesn't come with a drill case or bag, etc.
The one thing I didn't realize was they didn't include any allen bits, which stinks because I specifically bought the drill to put together an IKEA desk. (which I find very odd as they included Robertson bits) As a side note, I ended up getting the baker and bolt allen bits and they are incredible quality. https://www.amazon.com/Baker-Bolt-Wrench-COMPLETE-Magnetic/dp/B07GVSV5R7/ref=sr\_1\_2?keywords=baker+and+bolt&qid=1576546921&sr=8-2 - I highly recommend those too.
All in all, this is a great drill kit for the value. I give it a 5/5.
BLACK+DECKER 20V MAX Cordless Drill / Driver with 30-Piece Accessories (LD120VA): For under $60, you can't beat this kit!
I would consider myself to be an "around the houser" when it comes to using tools. I'm not doing any voluntary DIY projects, but hanging pictures, fixing door handles, putting together furniture (you get the picture) is normal for me.
After reading through different reviews on Amazon and watching youtube videos I decided on the Black and Decker and I'm very happy with my purchase.
Pro's
- The battery life is great, I've never done anything where I needed to stop halfway through to charge the battery (plus you can get spares). I think another reviewer said it lasted him around 4 hours.
- The torque is great. I've never had one problem drilling or removing screws.
- Hard to explain, but I feel as if I have more control over the speed / power im putting out vs my old dewalt drill.
- Relatively lightweight and ergonomically designed.
Neutral -
- The accessories are decent. The bits seem like cheapish steel to me, but the assortment is nice to have / I saw it as a bonus anyways.
Cons -
- There are no glaring cons, assuming the fact that you treat this like the starter kit it is. But It's not the most powerful drill, isn't the most complete kit, doesn't come with a drill case or bag, etc.
The one thing I didn't realize was they didn't include any allen bits, which stinks because I specifically bought the drill to put together an IKEA desk. (which I find very odd as they included Robertson bits) As a side note, I ended up getting the baker and bolt allen bits and they are incredible quality. https://www.amazon.com/Baker-Bolt-Wrench-COMPLETE-Magnetic/dp/B07GVSV5R7/ref=sr\_1\_2?keywords=baker+and+bolt&qid=1576546921&sr=8-2 - I highly recommend those too.
All in all, this is a great drill kit for the value. I give it a 5/5.
BLACK+DECKER 20V MAX Cordless Drill / Driver with 30-Piece Accessories (LD120VA): For under $60, you can't beat this kit!
I would consider myself to be an "around the houser" when it comes to using tools. I'm not doing any voluntary DIY projects, but hanging pictures, fixing door handles, putting together furniture (you get the picture) is normal for me.
After reading through different reviews on Amazon and watching youtube videos I decided on the Black and Decker and I'm very happy with my purchase.
Pro's
- The battery life is great, I've never done anything where I needed to stop halfway through to charge the battery (plus you can get spares). I think another reviewer said it lasted him around 4 hours.
- The torque is great. I've never had one problem drilling or removing screws.
- Hard to explain, but I feel as if I have more control over the speed / power im putting out vs my old dewalt drill.
- Relatively lightweight and ergonomically designed.
Neutral -
- The accessories are decent. The bits seem like cheapish steel to me, but the assortment is nice to have / I saw it as a bonus anyways.
Cons -
- There are no glaring cons, assuming the fact that you treat this like the starter kit it is. But It's not the most powerful drill, isn't the most complete kit, doesn't come with a drill case or bag, etc.
The one thing I didn't realize was they didn't include any allen bits, which stinks because I specifically bought the drill to put together an IKEA desk. (which I find very odd as they included Robertson bits) As a side note, I ended up getting the baker and bolt allen bits and they are incredible quality. https://www.amazon.com/Baker-Bolt-Wrench-COMPLETE-Magnetic/dp/B07GVSV5R7/ref=sr\_1\_2?keywords=baker+and+bolt&qid=1576546921&sr=8-2 - I highly recommend those too.
All in all, this is a great drill kit for the value. I give it a 5/5.
I personally like the Bosch combo R2/PH2 bits, hard to come by though, at least at the usual scumbags by me. Even though they aren't these wing ones, they work quite well on most screws I deal with (including panel cover, connecter/coupling set screws, and device screws) without stripping out either the head or the screw. Amazon has the tic tac container of the non impact version, haven't had much luck getting the impact rated anymore...
Edit:impact 5pcs
The main application is putting in self tappers. Using the impact for drilling is just an efficient/lazy compromise. Here. Look.
They make light duty 1/4" bits these are just an example.
This will convert any impact or the drill I linked.
Either option keeps you under budget.
A miter saw will definitely make projects easier. Depending on budget I'd shoot for a 12" if you're not having to lug it around a job site. If you have a bigger budget, look into sliding miter saw. Opens up more possibilities. Also, one of the cooler diy tools to have that is pretty inexpensive is something like this https://www.amazon.com/Bosch-Clic-Change-Self-Centering-Assortment-CC2430/dp/B0000TZX1M/ref=sr_1_2?ie=UTF8&qid=1535570856&sr=8-2&keywords=vix+bit&dpID=41YxEFIPn6L&preST=_SY300_QL70_&dpSrc=srch Makes putting screws in correct places a lot easier
Make sure the bit is fully seated into the chuck--with small bits, this is a particular problem because sometimes you need a longer drill depth. I prefer to use hex shank drill bits like, say, these: https://www.amazon.com/DEWALT-DD5160-Impact-Ready-Titanium/dp/B017KUENH8/ -- they'll never slip.