Just get your hands on some of those handy stickers online - slap one on the drivers side window and windscreen. Total nightmare to remove and leave that annoying sticky after effect. “Don’t park like a cunt”. Use with caution on repeat offenders in your area
https://www.amazon.com/Stickers-Violent-Little-Machine-Shop/dp/B072W8WJ7K
The Austrian / German Amazon site still has it.
​
For those of you still trying to get your hands on a Go Plus, Amazon Spain has had them pretty readily available since initial release. It appears to be unavailable until the 22nd now, but all the way up until last week or so, they were in-stock. I even bought one the day after Black Friday with no issues.
I live in Cali and the order came in less than a week. You can use your preexisting Amazon account, and you're only paying slightly more than the USD MSRP (40EUR ≈ 40 USD).
It sucks that the lot owner (Hotel?) allows other vehicles to park there. The red sign by the Supercharger stall states "Tesla EV Charging - Also available for hotel guest parking". https://smile.amazon.com/gp/product/B072W8WJ7K/
Don't know how long you would be staying in Milan, but PoGo plus is available for pre-order on Amazon IT at €39.99 free delivery. Dispatch on 29 Dec. Saw that it costs a lot in other Amazon sites. Other trainers in Europe may opt to get theirs from Amazon IT.
So I’ve been experimenting with this to design a legacy dice game and so far what I’ve come up with are
I’ve done all three on blank dice and they work well, but my preferences are 1 and 3. Additionally using larger dice helps in stickering/marking the dice.
Both my kids (ND and NT) love it when I give them stickers to just stick on a piece of paper. Sometimes I'll draw a road or a tree or a house for them. Keeps them occupied for hours. The 3D type, like these work really well for little fingers.
Yes. You’ll need to find the font and download it, then make some adjustments to your Cricut (I have a Cameo but it’s similar). Best is to use vinyl but Tamiya sheets work and are a bit less expensive if doing a one off (plus you can use them for the canopy masks). When you run it for cutting, cut 3 sets at the same time so you can use the best ones. A fresh sharp blade helps quite a bit.
Don’t forget to make a mask for the nose art if it’s just “Maggie”. Scan the picture and make it layer 1. Draw over it on layer 2, scale it for the model, then when ready to print/cut the mask just hide the layer with the picture on it.
Serial numbers were standardized at (IIRC) 8” high (check to verify for a P-38). The squadron codes where usually unique to the squadron in terms of style and dimensions, but usually consistent within the squadron.
I don't have a set cube so I don't remember exactly but generally you create card groups so that no pack can have duplicates of commons or uncommons. The simplest method basically only include commons from a single group in a pack or uncommons from a single group in the pack. There are more complicated more true to form methods but this is what I would do.
To facilitate this double sleeve and put some of these on your inner sleeve to denote group. I use these for my jumpstart: https://www.amazon.com/gp/product/B003M6PFS6/ref=ox\_sc\_rp\_title\_rp\_16?smid=&psc=1&pf\_rd\_p=89634936-9243-4a7f-a6d1-86659cd7c55b&pd\_rd\_wg=ZySqD&pd\_rd\_i=B003M6PFS6&pd\_rd\_w=S8ysG&content-id=amzn1.sym.89634936-9243-...
My kids went through this phase, https://www.amazon.com/gp/product/B07DFJWZ6X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I love these, lots and lots to keep them busy and they are the puffy ones so easy to get off of places they aren't supposed to be.
Your best recourse -- https://www.amazon.com/Stickers-Violent-Little-Machine-Shop/dp/B072W8WJ7K
Do this once, and this jerk will never park there again.
If you have 8 or less varities, you can use little map marker stickers and assign each a color on some index.
Buy a Spirograph. Kids love them and it will keep them occupied for hours.
Super Spirograph Design Set- 50th Anniversary Edition with Twice as Many Gears - for Ages 8+ https://www.amazon.com/dp/B00KJLUTQU/ref=cm_sw_r_apan_glt_fabc_92V0XN6FPD25R6WBXJNJ
Yes.
I use a Silhouette Cameo but a Cricut will also work.
For canopy masks, I use Tamiya tape in sheets.
For vinyl masks I’ve used Oracal sheets. Not sure if I got the 810 or 813, but I do remember the roll did not work as it was…rolled…and did not want to lay flat.
Thank ma man! I used this sheet
https://www.amazon.com/Tamiya-America-Masking-Sticker-TAM87129/dp/B004WBC07Y
I cut the papers and after each airbrush, I pasted the paper on the figure. :)
Product name: Fashion Angels 1000+ Totes Adorbs Colorful Stickers for Kids - Fun Craft Stickers for Scrapbooks, Planners, Gifts and Rewards, 40-Page Sticker Book for Kids Ages 6+ and Up
Features:
Highest price ever: $8.99
Lowest price ever: $6.86
Average price: $7.94
Previous price: $8.99
Current price: $6.92
Last price change: -24%
Price change from average: -12%
Price change from all-time low: This is the lowest price ever!
The item was in stock as of 05/04/2021 22:09:23 (UTC)
At least the stickers come off easy. These are better and take about half an hour to remove according to the reviews, not that I’d suggest people do something like that.
Hey there,
I ended up ordering two from Amazon Spain a few months back (one for me and my friend). They took a little longer to ship (like 2 weeks), and I had to pay an extra 10 for shipping but they arrived in working condition with our Andoid/Iphones. They are still up on the website (maybe this is a new stock or something)- https://www.amazon.es/Nintendo-1082166-Pok%C3%A9mon-Go-Plus/dp/B01HQ55NPI
I have also heard of people having luck with Amazon Italy, and France!
hi there! i think we all need something fun in our lives!! stickers,,, are so fun! especially the incredibly puffy ones, and it's super fun to stick em everywhere and just decorate your camera/computer/phone case etc.
I think these are it. I hope he enjoys them :)
The resonance makes the pattern start and end with them in the same point every 8 earth years/13 venus years, after which it repeats. 8 years from today, Earth and Venus will be in the same spots relative to the sun as they are right now. If they weren't resonant, that wouldn't happen.
But they aren't exactly resonant, so if the simulation continued for another 8 year cycle, the next pattern would look the same but be a teensy bit offset from the previous one. If they were perfectly resonant, then the pattern would draw right on top of itself for the next cycle.
If that's not enough, I dunno man, buy a spirograph.
SO YOU WANT GIANT GOOGLY EYES? OH BOY, TODAY IS YOUR DAY!!!
https://www.amazon.com/Toy-Giant-Googly-Stickers-Novelty/dp/B00R56OB0M/
Where did you get the stencil? I've been looking for a good digital camo stencil forever - but all the ones I've seen are far too big. I ended up buying some Tamiya 1mm*1mm grid masking paper and doing it myself. It. Was. Tedious.
The "S" form is made by combining several pieces of this Spirograph set. He used the cardboard as a guide to pin the forms down together.
I use stickers like these to mark tiny cards and electronics - http://www.amazon.com/Map-Dot-Stickers-Assorted-Diameter/dp/B003M6PFS6
Mark them by color instead of with any kind of writing, and make a note of what each color means.