Agreed! Few products have earned my loyalty as much as these - I use them for paintings and pictures and even after several years, they come off with no issue
https://www.amazon.co.uk/Command-Picture-Hanging-Strips-Removable/dp/B00OI6F67O
I'm guessing it's a rental so you can't use any nails, screws, or anything which will mark the walls?
If so, I'm in the same boat. I've been using some picture hanging strips which are basically like a velcro that goes on the wall. So far it's held my frames up for months in my last place and in this one. When it came time to leave the last one the frame pops off the wall easily, and then you stretch the sticky part of the hanging strip to make it release (there are fully instructions on the pack). I can highly recommend them.
I bought some 3M tape off of Amazon, to mount a sign onto brick. It sticks like crazy. I don't see why this couldn't work for you. These new doorbells aren't very heavy. Just try to clean the surface with soap and water before using the tape.
https://www.amazon.com/gp/product/B00004Z4BV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hey right yes these are PVC panels from Art3d on Amazon. They have a pulp paper version for $10 less but honestly I much prefer the PVC. I used two sided tape, this one specificially https://www.amazon.com/Heavy-Duty-Exterior-Mounting-Tape-Holds/dp/B00004Z4BV
I did 4 corners only for tape, they are on there VERY good. I did not use spacers and you can tell where some of the manufacture cuts did not fully align. I have everything nearly 100% touching but not 100% flat everywhere so I am going to use edge banding to seal off the gaps in between each tile.
No 3d files.
I used this velcro https://www.amazon.com/dp/B08P3MXLLD
And the thicker vr cover from here since with the thinner one my eyes were touching the lens lol. https://www.amazon.com/dp/B06XTBZBFN
Then all you do is put the velcro with the hooks on 5 parts of the VR headset that don't block the magnets from the previous VR cover. Then all you do is put the VR cover on top of the velcro and it sticks. If you want to see a video of this in action check out MRTV's video
Instead of Command Strips, consider something like 3M VHB tape, it's used in automotive applications, and is very high strength. At my old job, we used it to hang the sign on the front door, and it stayed up for 10+ years.
There are cable cutouts on the underside of the cAP AC which can be easily removed with a utility knife or a pair of pliers. So, you can still flush mount the access point and run the cable along the surface of the wall: https://i.imgur.com/xqa9KsL.png
As far as mounting without drilling, a few pieces of mounting tape should work nicely:
https://www.amazon.com/Scotch-Extreme-Mounting-1-inch-60-inches/dp/B009NP1JQC/
Swap out the adhesive with some high tension Gorilla Glue mounting tape. I use the 15lb. stuff for usb hubs and the like and its a major pain to remove them after. If you use the 30lb. stuff it would be nigh impossible to remove without tools. As for the retention pin that's something I'm afraid I don't know how to prevent removal of.
Scotch RFD7091 Interlocking Fasteners Strips, 4, Black, 2 count https://www.amazon.com/dp/B00347A8GM/ref=cm_sw_r_cp_api_glt_fabc_4R67C333B7JVFT88EEKS
I use these to hang practically everything at my house
Ah gotcha. Yeah it being a work truck and for daily use does make a difference for sure. If I were in your shoes and looking for a daily work light that just happened to be stored in my work truck I would think about the mount last. I'd get the exact light I want and then look for suitable mounting solutions since the actual use of the light every day will probably be more important than how it's stored.
For the nextorch belt thingy you could honestly just get some double sided foam tape and use that to stick it to the door panel or something. The back of it is flat so that should work nicely.
I wasted a lot of tape trying to stick my power strip but it kept falling because the bottom of the power strip wasn't flushed, it had screws popping out, meaning only 4 points were actually touching the table and not the whole surface.
so I bought this tape and taped 3 layers on top of each other to make the surface even and it worked great.
other crappy tapes were used to hold the wires in place
Good Luck
So the adhesives that I am using came with the lights which was velcro adhesive patches. But I do have some back up adhesives that are really good and been useing them for months now for other things that need sticking! And they are only $4 https://www.amazon.com/dp/B000KKPHZ8/ref=cm_sw_r_cp_apa_fabc_BVv3FbBM7HW0N?_encoding=UTF8&psc=1
Here’s the link to the 3m
Double Sided Tape, HitLights 3M... https://www.amazon.com/dp/B07TC16SZ7?ref=ppx_pop_mob_ap_share
It’s a lot bit thicker but I put it on the existing 3m it came with but before I put the new 3m on I warmed up the metal plate to make sure it bonded together
Gorilla Heavy Duty Double Sided Mounting Tape XL, 1" x 120", Black (Pack of 1) https://www.amazon.com/dp/B082TQ3KB5/ref=cm_sw_r_cp_api_i_tUKBFbNYC87FZ
They sell it at Lowe’s, Home Depot and sometimes even Walmart. So no need to order online.
I used Gorilla Tape. I used this same tape to attach small Noctua fans. Reason- you can easily remove, reattach without any adhesive residue on the case or components.
Works great! Just wipe it down beforehand so the surface is clean. I use this stuff.
Also the front emblem “nubs” break pretty frequently but its still usable, no one has time to pop the grill off every time they swap emblems lol
Yeah happened to my buddies pint and mine. The adhesive stopped working at some points. Bought this off amazon and it did the tricky perfectly. Gorilla Heavy Duty Double Sided Mounting Tape, 1" x 60", Black, (Pack of 1) https://www.amazon.com/dp/B019HT1U9E/ref=cm_sw_r_cp_api_i_cwS8EbQCCJ3NM
add thick double sided tape? Just layer it up like 2-3 times?
​
​
I can't speak for that stand particularly however I've used a projector stand and had some removable hanging strips https://www.amazon.co.uk/Command-Picture-Hanging-Strips-Removable/dp/B00OI6F67O
They're velco straps with adhesive to stick onto surfaces (this case being one side on the camera, one side on the stand) with a little tab sticking out the bottom. You can pull the tab to remove the adhesive without leaving any marks or residue
Never took them off, the Mrs worked around the rear pony and the side badges stay on so no reason to pull em.
I have used both Gorilla and 3M Mounting tape but I'm not sure of the thickness vs the OEM foam tape.
Sony X90somethingorotherletters? Looks like I have the same exact TV and, yes, they fell all the time. Until I got this stuff. It won’t fall again. In fact, be sure where you want it first. It’s removable but it’s an effort.
Gorilla Heavy Duty Double Sided... https://www.amazon.com/dp/B082TQ3KB5?ref=ppx_pop_mob_ap_share
I second the adhesive strips but you could go with ones that aren't velcro-based if you don't need to remove it regularly, the benefit being that the KVM will sit more flat and won't move at all as you push buttons.
It looks like your KVM is suspended off the desk a bit so I guess it has feet on it, so I would see if there's a way to remove the feet too because the tape won't stick to the feet too well.
Ordered some velcro tape off Amazon to tape it to the back of these mats and hope it sticks to the carpet.
https://www.amazon.com/dp/B08P3MXLLD?psc=1&smid=ATVPDKIKX0DER&ref_=chk_typ_imgToDp
whoops, forgot to post the link... 🤦♂️
either 'heavy duty' or 'extreme' mounting tape.
just make sure to wipe down/clean the surfaces with rubbing alcohol beforehand and you're golden.
Honestly, I don't know which product I have. The roll is probably marked, but buried with the rest of my tools at home right now while I'm at work.
This is exactly what I bought off Amazon though it doesn't specify which version it is. My dash cam has never fallen off after using this. It was actually fairly easy to remove as well when I sold my car a few months ago and removed it. I've also used it to mount under cabinet battery powered lights in the kitchen and closets.
What kind of tape are you using?
I put a lot of VHB 3m Tape on mine (this one), as well as clamped the wing overnight and it's pretty much stuck on the trunk.
I've first tried Velcro heavy duty 50mm tape, but it failed pretty quickly. I moved on to Gorilla mounting tape which has lasted a few months so far with no signs of fatigue, so that's what I'd recommend!
I'd also recommend grabbing a roll of 10mm velcro wrap for coiling the cables.
As I said, it's a little bigger. Too big for the metal brackets so remove them completely. I used velcro tape to "stick" the battery in place.
Here's what I mean by velcro tape.