The best Sewing Products: Reddit reviews

From 3.5 billion Reddit comments

They’re meant for attaching things that can be easily removed. Used on shoes instead of laces for ex. I used something similar to this: https://www.amazon.ca/dp/B0010HADEA/ref=cm_sw_r_cp_api_i_K37mCb17EB04Q It’s hidden behind the battery, but allows me to detach it in case it became punctured

To solve the pricking yourself with pins problem-- try sewing clips! I bought these from Amazon and I think they're great. I find pinning stuff can sometimes distort the fabric, and you can't pin some fabrics because it leaves holes. They don't totally replace pins since you can only work from the edges with these, but they are really nice regardless!

Get a seam ripper from the sewing shop/Walmart/amazon, and break the stitches holding it on.

Looks like this: Dritz Deluxe Seam Ripper https://www.amazon.com/dp/B0001DSIVY/ref=cm_sw_r_cp_api_7MTUzbGRHGS1W

I use printable stabilizer! I make the design in photoshop or Canva and then print it on this. It's not the easiest to learn to work with but for long projects where soluable pencils wear off it's the best.

I used to work at a public safety store (police, fire, EMS uniforms) that did embroidery. Pick yourself up one of these from Amazon or Walmart or a craft store and you'll have your name off of there in no time. It'll take under a minute per letter once you get the hang of it. To help reduce the chance that you stick the seam ripper through the fabric and make a big hole, keep the area you're working on against a table top and keep the pointy end parallel to the table and fabric. Once you have it cleaned up, take something like a firm nylon bristle brush and go over the area on both sides of the fabric. It will help pull any thread fibers out of the holes and make the holes close up as much as they can. If you want to be safe you can then rub some seam sealer over the spot from the inside.

What !?!! I didn’t even know ancient copper came in that style ! I have heard of some techniques of pushing the snag back Into the skirt

Linked it

https://www.amazon.ca/Dritz-618-Snag-Nab-Tool/dp/B003PTVS68/ref=asc_df_B003PTVS68/?tag=googlemobshop-20&linkCode=df0&hvadid=292955033470&hvpos=&hvnetw=g&hvrand=871957083659683605&hvpone=&hvptwo=&hvqmt=&hvdev=m&a...

You can get a seem ripper off Amazon for around $5. They can be used to remove annoying tags.

I'll respond more later. I have a migraine so it's hard to come up with a thoughtful response.

I use a Snag Nab It by Dritz (here's one on Amazon). It's longer than a needle so it's easier to hold and it has a sharp point which makes it easier to grab the threads you need to pull. Bonus: It's also useful for it's actual purpose of pulling random fibers to the back of the fabric. This is my most useful cross stitch accessory.

That’s such a great gift! I have the Brother CS6000i and love it. It comes with several attachments and accessories, has a lot of stitch options, and sews smoothly and easily. It’s way under your budget (depending on where you purchase it from) so you could probably find something even fancier / more powerful.

https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_cp_api_i_WDJNCbJ0CS4MK

Printable water soluble self adhesive stabilizer just print your design onto it, stick it where you want and start embroidering. once you're finished just rinse and the stabilizer dissolves.

Iron-on patches aren't really the best for airsoft. Generally, the permanent nature of the patch, along with the need for open space to attach it, generally makes them less preferable to a velcro backed patch.

However, iron-on patches generally have a lot more variety (at least in my experience) and you can get a lot of different stuff that you generally don't see with a velcro backing.

The solution to that is this: Industrial Strength Velcro.

Basically, you measure your patch, trim the hook side of the velcro to fit inside the edge embroidery, and then stick the velcro directly to the patch.

Just pulling from my amazon list: $125ish? Bought all from the amazon warehouse. It is really super easy to do. Menswear is just patience and only cutting once you are sure of the hemming. It's easy to take a seam ripper and start over if you make a mistake.

• https://www.amazon.com/Brother-cs6000i-60-Stitch-Computerized-Sewing/dp/B000JQM1DE
• https://www.amazon.com/Fiskars-Piece-Rotary-Cutting-Set/dp/B000B7K9UI/
• Various pins + pin cushions, seam ripper, and Gutermann Thread.

I took a class at a local fabric store (101 level) to learn my machine, but YouTube works too. I like the shop at the end of my street so I don't mind giving her my business. Took an hour to really get to know my machine, another hour printing off instructions on how to hem.

I did my summerweight jcrew chinos that I got on clearance last year this past weekend and it took me an hour to do 6 hems. Wear them inside out, pin at the correct length, steam that hemline, measure +2 inches, fold over one inch, then again for a perfect hem. I basically do one leg at a time, and copy the other leg.

I’ve used this machine before and I’ve had good results. I don’t recommend sewing heavy fabrics with it but, as a beginner, I wouldn’t recommend that normally. Only thing though, originally when I bought it (may 2020), it was 120.00. So I’d look to see if this one is sold anywhere near you for around that price.

Other than that, I’d aim for a machine at least 100.00 but, no more than like 150-160.00 USD. I’ve used machines under 100.00 and I returned it in a couple hours after use. I also wouldn’t let the sales people talk you into that “industrial” machine they seem in the stores. I’ve used real industrial machines for work and school and the strength isn’t the same honestly.

I also personally liked ones that don’t need a bobbin case (ones that a built in one). Their easier to use since a bobbin case alone can act finicky if not under the right conditions (not put in correction, bobbin not put in correctly, tension is wrong, etc). Your gonna have a lot of work to do learning the sewing basics alone so I think putting in that extra couple dollars for a “built in one” (not honestly sure what it’s called) will save you some time at least.

The other thing is simplicity. Don’t get one of those fancy ones where it’s nearly all computerized. Just look for one where it has a straight stitch, zig zag stitches, and some decorative stitches. The one I suggested (if you can find it) isn’t to bad honestly as the computer is mainly used to change the stitch number.

This is of course from my personal experience.

Sorry to hear about your bike accident. I had a slip and fall that wrecked my back and had to figure out how to sew standing up.

Hand sewing is going to be an issue for you, obviously - but pinning could be a real challenge without both hands too. Have you tried Wonder Clips? They're absolutely amazing tools and can be installed with one hand very easily compared to fiddling with pins. Plus they don't disappear on the floor if you drop one.

You can try a Snag Nab It needle and push the threads through to the inside, these are just good to have - Snag Nab-It.

Pretty sure everyone is right about this being a loose weave material tho. The long game here is you let the problem get way worse then have one of those beautiful sashiko repair stitches done and end up with a gorgeous custom faded and stitched jacket.

Why magnets instead of these?

I’ve recently started printing onto the dissolvable, adhesive stabilizer to make patterns for dark fabric and really like it. It’s texture isn’t very nice to draw on, but if you could draw your design out on paper you could just photocopy the design onto it. Once the design is on it, you just stick it onto your fabric, stitch through it, then soak in water at the end to dissolve the paper pattern completely. The one I’m using is Sticky Fabri Solvy in case you want to look it up...

I use markers really similar to what the other commenter mentioned - just a different brand :) link to Amazon

I like this one, you just place it on the floor and when you sit down it is at your level. Plus the clamp bar thing in front is nice to decorate. I've put a bunch of needle minders on there.

https://www.amazon.com/dp/B000YZ7M0W/ref=cm_sw_r_cp_awdb_imm_t1_Z4HRRM84NWC3X4H8V36J

Brother CS6000i Feature-Rich Sewing Machine With 60 Built-In Stitches, 7 styles of 1-Step Auto-Size Buttonholes, Quilting Table, and Hard Cover https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_other_awd_KbzGwb4HTNABS

I cannot recommend this enough. It's my second sewing machine. My first was my grandma's from the 1940s then this. Comes with lots of accessories. I bought mine "used" from amazon warehouse for I think $125 because the box was beat up (but the machine and all accessories were perfect and present). I have nothing to compare it to but the 5k reviews on amazon loved it and I have been very pleased with it.

For a floor stand, I reccomend this. I use it for every size piece and it's very secure. A set of qsnaps and extenders will pretty much cover every size and shape you need and they are easier on fabric than hoops. They are excellent with that floor frame because you feed them in by the corners and they are so stable! I linked Amazon so you get good pics, look around for better prices. Good Luck!

Im in the same boat. I recently lost weight and went from a 34 waist to a 31. All my clothes look baggie which in turn make me look even more skinnier (like sick skinny). My suits and dress slacks were sent to the tailors because I was afraid that I would ruin them - albeit pricey.

I ended up biting the bullet and bought a Brother sewing machine off of Amazon and had it delivered a few days ago. Its a Brother CS6000i. I'm still reading the +30 page manual but I'm learning its not too difficult to learn basic sewing. Practice first and make sure you use the correct needle and thread.

[(https://www.amazon.com/gp/product/B000JQM1DE]

Im aiming to use the machine to "slim down" my dress shirts as well as taper a few pants and shorts. Ill probably use it on my polos and t-shirts as well.

There are great videos online on how to do this.

I love my Brother CS6000i! It's very light, so it doesn't have that sturdy feeling, but it's a great beginner machine with room to grow for about the same price! It's computerized, comes with a lot of accessories and very user friendly! Check out the reviews on Amazon and see what others think!

https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_cp_awdb_XM2rzbN3V6FJ2

I use a water soluble marking pen! I think most craft places should have some, but this is the one I got on Amazon: https://www.amazon.com/dp/B00QTIBOS4

It works great for lighter fabrics and easily rinses off with cold water.

https://www.amazon.com/dp/B00QTIBOS4?ref=ppx_pop_mob_ap_share

I really love these. You don't have to apply very much pressure so they work great on stretchy fabrics. It washes out easily, but the blue is very easy to see too.

It is possible to iron these fabrics on the lowest setting of most irons, but there's not really any point for sewing a rolled hem. A few options:

1. Roll and pin the length of the hem, removing pins as you sew.
2. Clip the length of the hem, removing clips as you sew.
3. My preferred technique - clip or pin the first few inches, get some stitches in, then just roll the fabric with fingers behind the foot as it feeds through. When you're hemming a UQ protector or hammock you're not looking for 1/32" perfection.

Regardless of method and since this is your first time working with an UL fabric, I recommend using a little tissue paper (like for putting in a gift bag) for getting the stitches started as sewing machines have a tendency to suck UL fabric through the base plate. Let the TP stick out the front an inch or two so you have something to pull on to get the stitches started. If you have a straight stitch plate (as opposed to zig zag plate) this is a good time to use it. You can simply rip the TP off after you're done sewing.

70D isn't as bad as 10D or 20D, but can be challenging the first time.

I got these water erasable markers off of amazon. They wash right off so just throw your finished project in the wash before you iron it.

https://www.amazon.com/LEONIS-Water-Erasable-Marking-78008/dp/B00QTIBOS4/ref=mp_s_a_1_3?adgrpid=55725715853&dchild=1&gclid=Cj0KCQjw--GFBhDeARIsACH_kdY4Cq2AXcVqJcnr45549LRiJxwbIu1UxTo0LTW5bf6ABZdzTzIyRscaAox3EALw_wcB&hvadid=274728420680...

These are the ones I use.

Sure! I use it on wool sweaters too. Then I recommend snag nab it for things with pulls, like if your bag gets a pull. It’s magical. Here it is

Yeah. With ubiquiti switch configure Synology in “balance-tcp” mode for bonding.

I bought those Velcro strips and cut them: https://smile.amazon.com/dp/B0010HADEA/ref=cm_sw_r_cp_api_glt_fabc_NXXV0VKFYVZ7545YG7AP?_encoding=UTF8&psc=1

Yeah, Synology can communicate with UPS via special USB port and can gracefully shutdown itself when UPS battery is low.