The best
Wire Strippers:
Reddit reviews
From 3.5 billion Reddit comments
The best of Wire Strippers by number of unique Reddit comments:
Top Reddit reviews mentioning Wire Strippers:
They're rather common and are available anywhere from Harbor Freight to Home Depot. This is the set that I own.
These wire strippers right here. These things make stripping wires so freaking easy. I never had a proper set of wire strippers and would use Xacto knives and my fingernails prior to buying these. Now it takes a second and a half to strip a wire, no measuring or anything. Stick the wire in the thing, squeeze the thing, pull the thing, and you have a stripped wire. Highly, highly recommended.
Anyone telling you just to go a hardware store doesn't understand what the actual issue here is: you have a bolt in imperial threading (#6-32) but a metric length (20 mm). They do. not. exist.
Many rads use M3 screws. Others (like EK) use 6-32. They are not interchangeable unless you want to re-thread the holes (which is possible, but you also risk deformation and cross threading without a proper tool).
Some people will tell you to use 3/4" screws, since that corresponds to 19.05 mm and should be "close enough". I bought some and unfortunately they were slightly too short (just the fans --> rad, not even with a bracket in between as it will be in the case). The threading holes in the radiator are slightly recessed, so you need 20 or 21 mm. Your best bet is going to be buying 1" screws and a wire stripper like this which has a bolt cutter built in especially for 6-32 threading. Then cut them to the proper length.
Get a crimper kit and and an F Type female-to-female coupler. Crimp ends on either of the two ends and couple them back together.
It's not water proof and the tech will probably cringe but it should work in the short term.
And this is the hard part. Be very careful trimming the plastic off the wires. Very easy to cut the wires and end up with not enough to twist into a connection. You can get a tool that will be easier to use-https://smile.amazon.com/VISE-GRIP-Stripping-Cutter-8-Inch-2078309/dp/B000JNNWQ2/ref=sr_1_3?crid=2V5Y7I3SA1JND&dchild=1&keywords=wire+strippers+electrical&qid=1615228771&sprefix=Wire+stripper%2Caps%2C211&sr=8-3
Irwin also makes a bunch of stamped electrical pliers like these. If you row through Amazon you'll find dozens of this type from companies I don't recognize.
Those posts cover most of it, but I'll repeat one item mentioned in those posts. Buy a good pair of wire strippers. It will make this project immensely more enjoyable. I'm using these.
This will work. Find some RG6 full copper cable (or copper clad cable if you're cheep like me) that suits your length.
Same here bro searched all over my small town and nothing I just ended up having to order some off of amazon here it is if you need 👽
Klean-Strip 2-Pack VM&P NAPTHA QT https://www.amazon.com/dp/B01LWRQPWK/ref=cm_sw_r_cp_api_glc_fabc_JSDaGb3JB65Y1?_encoding=UTF8&psc=1
With SS316 wire, you can run it in power (wattage) or TC mode, whichever you prefer. With Kathal wire, only power mode. I mostly stick with power mode. TC mode is fiddly, even with a DNA mod, especially with clapton coils.
The 50mm x 60mm organic Japanese cotton pads are very popular among builders. "Puff" is one of those brands you can get on Amazon.
An RDTA is essentially an RDA sitting over a tank. Since neither has a chimney, you can get great flavor from each, depending on the particular unit.
Dual coils will produce a more intensive vape but can also be twice the work, use twice the cotton, twice the wire, twice the juice, and make your RDA twice as hot. That last one is real important to me. I only use one fused clapton in my Goon to keep it from getting too hot. Not all RDAs support single coil mode, however. You typically want to shut off the airflow on the empty side so as not to dilute the flavor.
Coils are ambidextrous, they don't care which end is negative or positive.
You'll save a lot of money buying spools of wire. A good flush cut wire cutter is essential.
My favorite is if you buy Naptha, on Amazon, the "Frequently bought together:" are naptha, sodium hydroxide, and a turkey baster, which is exactly what you need to extract DMT. I wondered if it was sponsored by the DEA for leads.
For resi I LOVE rackatier’s crocs. Far better than Kleins offering, super sharp & stays sharp. For any other use I use these Knipex.
I assume you mean cheap cutter-style wire strippers like these and not automatic wire strippers like these. Do you make two cuts and rip out the bit in the middle or do you make just one cut and the insulation shrinks back by itself?
I've been using these knipex for the last 2 years and they still strip and cut like new. Feel great in the hands, worth the price imo
I’m no electrician but I do a lot of diy electrical work and these Irwin grip strippers are my favorite BY FAR. So easy to use and perfect every time without worrying about damage to wire core
Get wire strippers like this
these knipex
If you don't have coax in your walls already then you want to hire a professional. It's possible to do it yourself but it's going to be a huge pain in the ass and a ton of work. The professionals already have good specialized tools and experience to get it done in a fraction of the time.
If you just need to terminate the coax coming out of the ground and there's already a junction box with a bunch of unterminated coax that's running to various rooms in your house, then get a coax termination kit, something like this: https://www.amazon.com/Coax-Crimper-Compression-Stripper-Connectors/dp/B06W5G64VQ/ It may seem like a waste of money to buy a set of tools you'll only ever use once. You can get a stripping tool, compression tool, and a bunch of connectors for $20. If there's multiple coax cables in the termination box you'll get the clearest and cleanest signal without using a splitter, so you might want to get a tone-tester as well so you can easily locate the cable which corresponds with the outlet you want to use.
You can get a little baggie of twist-on connectors for $6 and strip with a knife. Don't. Get the kit with the proper tools. The extra $14 is totally worth it.
The blue cables are plenum grade ethernet cable. It usually has a blue jacket to indicate that it won't emit poisonous fumes if there is a fire. The grey cable is a low voltage wire for something like landscape lighting, sprinkler, etc. The two white cables are television wires that you could use with an antenna. You'll need to terminate them properly. I bought a kit from Amazon that had RG6 ends and an awesome razor stripper that cuts jacket and exposes the copper precisely by just spinning it one revolution. The kit contains a tool to compress the ends onto the cable and makes them look as good or better than store bought cables.
Be careful around that box. If you get rough with it and pull something loose you'll lose your internet.
Definitely a solid collection, but I'll make a few recommendations:
-Leave the calipers at home, you'll never use them. I've used a set once in my entire career and they'll just wind up getting thrashed in that bag.
-Ditch the yellow allen keys, that orange Klein set will do everything yyou need.
-Change out the box cutter for a proper Olfa knife, and get a loomex stripping knife as well.
-YMMV, but I personally loathe those strippers. I personally prefer either these or these.
-Might be a little late, but if you can return that backpack and get the one that's a size smaller, do it. Speaking from personal experience, I have that exact pack and I hate it. Most of my apprentices got the smaller Klein pack and it's so much more practical. Way cheaper too.
-A second, larger set of channel locks wouldn't go awry.
Also, what do you have for drills? At the very least, you should have a decent 20V cordless impact and drill. If you can afford it, splurge for a combo kit that has a standard drill with a hammer function. Unless you're working somewhere where powered hand tools are provided.
All in all though, very good start.
You don't mix wire gauges.
Do yourself a favor and get these, they're great:
I got these with the red dipped grips. They've been working great on the 20 year old stranded thhn I'm working with.
I got a pair of these and now I'm spoiled and will never buy another set of strippers/cutters. The blade is curved so you can use it to strip bigger cables too
I've got a Klein single-motion wire stripper (the kind where you just insert the wire and squeeze, and it does everything,) that I think is one of the most useful tools I've ever purchased. Makes small electronics work so fast and efficient. One of those tools that just "works," not a gimmick.
I will never not upvote someone embarking on this incredible project. Good luck, take your time and spend extra time measuring your wire cuts. And if it fits your budget, I cannot recommend highly enough a good pair of wire strippers.
wire stiripper/crimper and some quick disconnects.
you could probably use some pliers instead of a crimper.