What is Reddit's opinion of Under Desk PC Mount Economical CPU Holder Desktop Computer Mount PC Holder Computer Case Carrier Steel Adjustable Straps Computer Tower Mount Bracket?

From 3.5 billion Reddit comments

1home Economical CPU Holder Under-Desk PC Holder Desktop Computer Holder Computer Case Carrier Steel Adjustable Straps Computer Tower Mount Bracket https://www.amazon.com/dp/B07PJQ6QV6/ref=cm_sw_r_cp_api_glt_fabc_CSPG977HMYWKAVEXG3PN?_encoding=UTF8&psc=1

Get a surge protector and put it under your desk using double sided 3M tape so that all of your cables plug into the surge protector and then your surge protector plugs into wall.

Use cable management under your desk to hide all the cables.

You can get cable raceways or a cable net to cover any cables that hang enough to see

Then use one of these to mount your pc under your desk.

Under Desk PC Mount Economical... https://www.amazon.com/dp/B07PJQ6QV6?ref=ppx_pop_mob_ap_share

You could simply use this mount to also hide your cables pretty well in its current set up.

You could always strap it to the bottom of the desk.

Under Desk PC Mount Economical CPU Holder Desktop Computer Mount PC Holder Computer Case Carrier Steel Adjustable Straps Computer Tower Mount Bracket https://www.amazon.com/dp/B07PJQ6QV6/ref=cm_sw_r_apan_i_HR61YZMGBY0TWZ2X0BHX

I use this to mount it to the bottom of the desk: https://www.amazon.com/1home-Economical-Desktop-Computer-Adjustable/dp/B07PJQ6QV6

There are also cable trays on the back of the desk as well as a cable 'spine' that runs to the floor for power and network.

Hi,
I've been using similiar setup in my home desk - with itx case and mini itx ... Won't be putting my mainunit to top of desk anymore :) Now. tried to hide my cables better, so now main unit is on horisontal attacment - before it was in normal vertical attachment.

https://www.amazon.com/1home-Economical-Desktop-Computer-Adjustable/dp/B07PJQ6QV6/ref=sr\_1\_6?dchild=1&keywords=under+desk+straps&qid=1630935110&sr=8-6

It's pretty low tech, but it works great.

https://www.amazon.com/1home-Economical-Desktop-Computer-Adjustable/dp/B07PJQ6QV6

Using this, https://www.amazon.com/1home-Economical-Desktop-Computer-Adjustable/dp/B07PJQ6QV6/ref=sr_1_21_sspa?dchild=1&keywords=cpu+mount+under+desk&qid=1599849091&sr=8-21-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExQ0hESDE3S1o3WFBKJmVuY3J5cHRlZElkPUEwMzY4MTYyM1VFSkI4VEtHTjU5QiZlbmNyeXB0ZWRBZElkPUEwNzc3MjMwMTA3WlVCNURSWFRSNSZ3aWRnZXROYW1lPXNwX2J0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= but I swapped out the straps for some other ones that were a bit stronger.

Looking to mount my PC under my desk, but due to the case I have (O11 Air Mini) most mounts won't accommodate the width of the PC (12 inches). Would something like this work? I'm worried it's too flimsy for something like a solid PC.

https://www.amazon.com/1home-Economical-Desktop-Computer-Adjustable/dp/B07PJQ6QV6

I used This to mount my pc in an nzxt h510 even though the buttons were on top. It leaves enough room to vent out the top if need be however it could be used for any case really. 001 dynamic mini would work buttons on front can make bottom and top intak with side exhaust or top exhause etc. I have built in this buttons on top but still reachable and very easy on the wallet as it comes with the fans , This one has buttons on front and is small and fits atx motherboards with a removable tray to build on which can make things easier. There are a ton of good cases, and that particular mount leaves an inch inch and a half clearance so if the front is angled with buttons you should have no issue.

I have this one, haven't found the time to mount it yet.

https://www.amazon.com/1home-Economical-Desktop-Computer-Adjustable/dp/B07PJQ6QV6/ref=mp_s_a_1_9?dchild=1&keywords=under+desk+pc+mount&qid=1601808199&sr=8-9

something like this should work

I’m fairly sure someone on this sub used this (or something similar) on their sffpc recently. The size looks like it’ll work for the ghost as well.