(2 Pack) amFilm 3D Curved Tempered Glass Screen Protector for Galaxy S21 Ultra 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV Gel Application https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_apan_glt_i_VJW21DMH7EBZBY9G5EM5
I've been using this. tedious install but it comes out perfect and you can register the protector for an extra protector from the company. so 3 total for 40$
Here you go in case you want to try it:
https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_cp_apa_glt_fabc_W1WCX5X82BAE4ZD8X2Q4
I have received up to 4 free replacements even though they say only two. I know I I am bad with phones. So in the end I received 6 in total for $40. It also comes with two in the pack. Once you go UV you never go back. It looks harder than it is. Just watch sakitecks vids in youtube to see if you feel comfortable doing it. Good Luck.
This AmFilm works fantastic if you follow directions. No problems with fingerprint scanner.
I'm guessing you're not US since the US ultra's didn't seem to come with the screen protector
(2 Pack) amFilm 3D Curved Tempered Glass Screen Protector for Galaxy S21 Ultra 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV Gel Application https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_apan_i_NP8RWMH1WTCXPKT8K55M?_encoding=UTF8&psc=1
Best I've ever used. Still on the first cover after a year.
amFilm (2 Pack) Ultra Glass... https://www.amazon.com.au/dp/B08RYXF8F6?ref=ppx_pop_mob_ap_share
I am using this one and I dropped my phone like 3-4 times a week cause of my butter fingers. The smoothness is almost the same since I applied it. No issues with fingerprint sensor (have to redo the fingerprint register after installing). The other off brand screen protectors without UV glue are pretty bad in general.
I've had great luck with these.
(2 Pack) amFilm 3D Curved Tempered Glass Screen Protector for Galaxy S21 Ultra 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV Gel Application https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_apan_i_C0K16KFSA2N7RDVB8HGC?_encoding=UTF8&psc=1
I have had this on my phone since April. It hasn't budged since. Highly recommend. (2 Pack) amFilm 3D Curved Tempered Glass Screen Protector for Galaxy S21 Ultra 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV Gel Application https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_apan_glt_fabc_MSXJZYDVTH5VQ493BEVH?_encoding=UTF8&psc=1
I'm not sure if they're still around, but the pixel 2xl had curved glass and I used to use something like this. They're stupidly expensive, but they're also pretty foolproof and they never cause bubbles or anything. They can work with curved glass because the adhesive goes on liquid
(2 Pack) amFilm 3D Curved Tempered Glass Screen Protector for Galaxy S21 Ultra 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV G https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_cp_apip_MFAPIfixZIwVG
Is the one that I use, very good quality, but you have to be very careful with installing it. Not that the installation is difficult. But you have to take your time.
I have this one as well. It's TPU but I think most, if not all are, including the whitestone per one of the customer images. I do have a small chip/crack on it that seems to have protected the screen. Was pleasantly surprised by that.
I got tempered glass for the back camera array for piece of mind because it was available.
I have this one as well. It's TPU but I think most, if not all are, including the whitestone per one of the customer images. I do have a small chip/crack on it that seems to have protected the screen. Was pleasantly surprised by that.
I got tempered glass for the back camera array for piece of mind because it was available.
I installed this one, went on flawless, uses biometric no issues. Crystal clear, no bubbles. Check some YT reviews about it, everyone seems to be in agreement. Non affiliated link: https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_cp_apa_glc_fabc_ABXPNHTDTDJD3B60NNBQ
I use the OtterBox defender and tried the amfilm glass uv. It worked great but eventually the edge at the bottom splintered a bit. It was still totally usable. If I had to guess it was user error on my part or maybe I did drop the phone and didn't notice the crack at first. Anyway, here's the link. https://www.amazon.com/dp/B08RYXF8F6?ref=ppx_pop_mob_ap_share
This is the one you want
https://www.amazon.ca/amFilm-Protector-Application-Compatible-Fingerprint/dp/B08RYXF8F6/
I'm using it currently
Warranty comes with 2 replacements if you register the product, so it's essentially 4 protectors for $60
I would be hesitant of the cheaper UV glue protectors, as they may not work with the fingerprint sensor. Also, this one has a great oleophobic coating, and the installation kit makes it very easy
The AmFilm glass protectors come with a metal cylinder that sits over the print scanner while UV curing. The scanner works perfect. Watch the install video, and you'll see the metal weight
I use this one from amFilm, for my S21 Ultra, and it works without any issues. Not sure, offhand, if they've got a UV one for the S21 though.
https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_cp_apa_glt_fabc_1KWV8GHPF90232PSJJ3T
Actually on sale right now. Still using mine and it's held up well. I'd honestly argue it straight up better than whitstone done while being much, much cheaper. Plus customer service is top tier.
amfilm has a glass version which looks similar to the Whitestone. I wonder which one is better: https://www.amazon.com/amFilm-Compatible-UltraSonic-Fingerprint-Application/dp/B08RYXF8F6/ref=sr_1_2?dchild=1&keywords=am+film+s21+ultra&qid=1618545925&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&sr=8-2
AmFilm Ultra - fraction of the cost of the Whitestone Dome for a 2-pack. Worked awesome on my S20Ultra for a year, even while changing between multiple cases every few days - so I continued with my S21 Ultra.
It also works fine with the fingerprint reader (doesn't make it better, but most of all, doesn't make it worse)
this is an Australian amazon link. hopefully this helps.
I use this one from amFilm on my S21 Ultra with no issues.
This one's been working great for me, and is cheaper than the Whitestone:
I've had this one on my S21U screen for over a year, and it's been perfect. If you mean smudges on screen protector from your
I use this with the Spigen Rough Armor case. No issues, in fact very impressed with it.
https://www.amazon.com/gp/product/B08RYXF8F6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I installed this one which stated Fully Compatible with Finger scanner.
Here is what I've been using. I applied the first one back in May and it hasn't budged.
(2 Pack) amFilm 3D Curved... https://www.amazon.com/dp/B08RYXF8F6?ref=ppx_pop_mob_ap_share
Try this one. (2 Pack) amFilm 3D Curved TGSP https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_apan_glt_fabc_83SC22XA83AGPKR10J6F?_encoding=UTF8&psc=1 Pretty easy warranty replacement too.
Taking them off is no different than any other glass protector. Takes about 5 seconds. You may want to consider the amfilm ultra glass they work awesome with the fingerprint sensor, and nothing feels as or protects as good as glass!
(2 Pack) amFilm 3D Curved Tempered Glass Screen Protector for Galaxy S21 Ultra 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV Gel Application https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_sm_apa_glt_fabc_XB21RH2809NGXCGDDXKE
Take your time and follow these directions meticulously, linked below,, watch 3 or 4 times first and during the install, starting and stopping while installing. The first one can be a little intimidating but it's not hard at all if you take your time and follow these directions to the tee.
It comes with 2 full glass protectors so if you have trouble for some reason with the the first one, there is another one to try. Also, they will send you up to 4 more unconditionally for free. You just need to email Techmatte they are a great great to work with. Weather you break it or just screw it up on install.
And if everything just goes to shite for some reason you can always return them for the amfilm HD clear Hybrid protectors. They are my pick if glass was not so much better. It's a sort of a Hybrid glass plastic material that goes on normally, no glue, but feels as close to glass as I have felt. The fingerprint sensor works perfectly with the HD clear Hybrid as well. But go for the glass, you can do it and it feels and woks awsome. There is nothing as good as glass!
AmFilm works the best from my experience. Have installed many whitestone domes as well. 4 new samsung phones in our family.
I am currently using the AmFilm (https://smile.amazon.com/gp/product/B08RYXF8F6/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) protector and am really happy with, no complaints whatsoever. Th installation process had several steps but nothing too daunting. Got it perfect the first time. And I think it is cheaper than the Whitestone, which I have never tried.
I've been super happy with this one. It's cool, comes with glue and a UV light. It's been on for 6 months with no issues.
(2 Pack) amFilm 3D Curved... https://www.amazon.com/dp/B08RYXF8F6?ref=ppx_pop_mob_ap_share
https://www.amazon.com/dp/B08RYXF8F6/ref=cm_sw_r_cp_apa_glt_fabc_Z8ESRS0TK356TFNQRZSJ
This is the one I've been using, hope it helps.
I use this one from amFilm.
I use this one from amFilm and it works without any issues.
I use this one from amFilm and it works without any issues.
I use this one from amFilm and it works without any issues.
For my last 2 galaxy phones I've used this: amFilm (2 Pack) Ultra Glass Screen Protector for Samsung Galaxy S21 Ultra (6.8 Inch), Full Cover (UV Gel Application) Tempered Glass Film Compatible with Fingerprint Sensor (2021) https://www.amazon.ca/dp/B08RYXF8F6/ref=cm_sw_r_u_apa_glc_i_Q3SPVQCGW7PDNY8VFX41?_encoding=UTF8&psc=1
I'm trying a cheaper brand this time:
https://www.amazon.ca/dp/B08PZ1QX85/ref=cm_sw_r_cp_apa_glc_i_8RA8W4Q380AK2HR5PKRF
It does arrive until the weekend. For a curved screen, you need a UV type protector is you want tempered glass. If not, the film types would be pretty easy to apply.
I'm using this one and have no issues with the fingerprint scanner
This is the one I got
https://www.amazon.com/dp/B08RYXF8F6?ref=ppx_pop_mob_ap_share
for the ultra yes, for the others no
the s21 and 21+ screens are flat so they just use regular old screen protectors.
the ultra one has uv glue https://www.amazon.com/gp/product/B08RYXF8F6/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
https://www.amazon.com/amFilm-Compatible-UltraSonic-Fingerprint-Application/dp/B08RYXF8F6
was thinking about getting this. I heard good things fro users of the s20 series with fingerprint sensor
AmFilm glass with the LOCA glue & UV cure light. Follow directions, level table top, keep the fingerprint weight on during 1st cure, and it's a fantastic screen protector with the scanner working great.
The issue is that ultrasonic fingerprint readers don't work with typical tempered glass screen protectors; you need to use a protector that uses LOCA (liquid optically clear adhesive). These kits are, by their nature, more expensive. That being said, you can get one from amFilm for $40.