What is Reddit's opinion of 3M 2080 G10 Gloss White 60in x 12in (5 Sq/ft) Car Wrap Vinyl Film?

From 3.5 billion Reddit comments

Thanks! The snow edition won't be available for a couple of months so I bought 3M white vinyl and wrapped the glass panes myself covering the black areas. If anyone wants to attempt this, I bought it on Amazon. It comes with more than you'll need so I had to practice some before it was good enough. Use a sharp Xacto knife (or if you have access to a paper cutter, those things in school that were heavy af), and a metal ruler. Cut extra so you can pull the vinyl around the edges and wrap it to the back.

Nope it's the white edition. I used this 3M white vinyl and used a sharp Xacto knife and a metal ruler to cut and wrap the panels so it looks like the Snow Edition. Good thing the vinyl comes with a decent amount cause it took some practice to get it right.

I don't think the Snow Edition is releasing until April.

This is just the normal white edition! But with this 3M vinyl wrap, a sharp X-acto knife, and a good metal ruler, you can make your own Snow edition by wrapping the black bars on the glass panel.

Here’s the one I bought: https://www.amazon.com/dp/B007EEW76A/ref=cm_sw_r_cp_api_glc_fabc_zmB.FbV70FTYE

I don’t think it’s yellowish, but it’s a bit glossy compared to the other already white panels of the case. Not really noticeable though unless you look from the top or the back. I tried my best not to overlap layers, so there isn’t much of that, but if I look close enough I can see where a strip of vinyl ends and another strip begins. It’s totally not perfect, but cool with me till they hopefully sell the Snow! Best of luck and post a pic of your build when you’re done!

I used this vinyl with a really sharp X-acto knife and a metal ruler. I would cut the strips a little longer and wider, then tuck in into the ridges behind and stretch the corners (cause they overlap). To line it up, I would look at the tape from the back where you can actually see the factory paint line and try to get it as straight as possible before committing.

This is all kinda hard to explain, it comes with a decent amount of vinyl to practice with, I had to redo several areas once I understood what I had to do better, I have never really wrapped anything in vinyl before. Just be sure to have a really sharp X-acto knife for cutting and a good metal ruler. Even better if you have access to a big paper cutter.

Ps5/Xbox series x both have 4k blueray players but they are pretty bare bones and lack any hdr processing or Dolby vision support that the dedicated players have such as the Panasonic ub820. My suggestion is buy a black player and use a white vinyl film like this. That way if you need to warranty repair or something you can peel the film off. Just make sure you clean the surface with isopropyl alcohol in order to make sure you get all the dirt and oils that come on it from the factory.

3M 2080 G10 Gloss White 5ft x 1ft (5 Sq/ft) Car Wrap Vinyl Film https://www.amazon.com/dp/B007EEW76A/ref=cm_sw_r_cp_api_glc_fabc_VOA9FbKYW3P5E

This one. And yeah you need a hairdryer or a heat gun to heat the vinyl in order to stretch it.

I cut them into strips to match the black and stick them out and stretched the vinyl over the edges using the blow dryer to make it have a cleaner look.

You’ll have enough if you buy the 1x5ft to make twice the amount of strips so there’s room for trial and error. I found it helps to make the strips slightly wider so that you can’t see the black if you are looking at the vinyl from an angle.

Edit: also I covered the aluminum part as well so that works too if you were curious

>This (3M White Vinyl Wrap) and :) (parts list)

3M 2080 G10 Gloss White 5ft x 1ft (5 Sq/ft) Car Wrap Vinyl Film https://www.amazon.com/dp/B007EEW76A/ref=cm_sw_r_cp_api_glt_fabc_K2DV6FXPMKPG4BJAJXXH?_encoding=UTF8&psc=1

the vinyl has a sticky side (note that I linked the vinyl I used)

We used white 3m vinyl for the edges

https://www.amazon.com/dp/B007EEW76A/ref=dp_iou_view_product_mobile?ie=UTF8&psc=1

I do not. I can send you some later. There is someone on this subreddit who did the same thing first! They suggested this wrap, which is what I used as well.

https://www.amazon.com/gp/product/B007EEW76A/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

I will edit later if I can recall the original post.

3M 2080 G10 Gloss White 5ft x 1ft... https://www.amazon.com/dp/B007EEW76A?ref=ppx_pop_mob_ap_share

I got it from here, and used an xacto knife to cut

You can always vinyl wrap your current sub. 3m Vinyl wrap is pretty good https://www.amazon.com/3M-G10-GLOSS-WHITE-Vinyl/dp/B007EEW76A?th=1