yeah I would guess it's not lead based on the color, BUT if the color is coming off I would be concerned. That means it's not actually colored glass but paint.
You might want to try these strips to make sure or just not use it until all of the color is off. (Or if you got it from DHGate dispute it - you'll have to say the product isn't as described or something though)
https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
There are several reasons why paint could scratch off easily. Most likely, it was a very light coat on top of another layer.
How old is the house? Does it peel off as well? Does it chip off? Is the layer underneath smooth and glossy?
The best way to prevent this is to sand off the surface and repaint, but you need to be sure none of the layers is leaded before you start doing anything. If the house was built before 1978, you should assume it does have lead paint. Go to your local big box hardware store and near the paint around the thinners and cleaners there should be a package of lead test kits. With a razor blade, cut into the paint until you feel like you've hit wood and scrape a small gash into the trim, then test that section.
https://smile.amazon.com/3M-717834209102DUPE-LeadCheck-Swabs-8-Pack/dp/B0051VARFG
If your tests come back negative, then all you need to do is roughly sand the trim and repaint it. If they come back positive for lead, then you'll need to do a bit more work or hire someone who specializes in lead abatement.
I’ve used these in several rental properties and never had an issue with them. Gives clear obvious results.
Paint chips are a concern if there is indeed lead.
Encapsulated means just that, encapsulated. Chipped paint is not encapsulated - lead is exposed and the chips could be eaten by a child.
I wouldn’t count on encapsulation on high use, friction areas. It’s one thing on outside trim or crown moldings. I’d be fine with that.
On a door jam, I’d strip/remove all paint. Constant running and chipping is a risk. (Again, only if there’s any lead paint layer).
You can check with a magnet, or by tapping on it with your fist.
If it's an apartment building the likelihood of it being a steel tub is quite high, they last significantly longer than fiberglass.
You could scrape some of the paint off and send it in for testing. I'm not sure what the options are where you live but there are companies that test for lead. Alternatively you could buy a testing kit and do it yourself, something like this: https://www.amazon.ca/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
It appears that porcelain enamel coated tubs prior to 1995 potentially contain lead, although the risk is low until you get to stuff made before 1978. You should focus on removing loose pinch, not trying to sand down the entire tub to the base finish. Generally when I repaint a tub I sanded it down with a 120 grit sanding sponge. You want to remove any loose paint and stuff up the rest of the surfaces.
Regardless of lead, a correctly fitted N99 respirator should be used whenever sanding anything potentially hazardous. Even if there is lead if you keep the room sealed up, wear the respirator and a disposable jumpsuit, then vacuum everything with a HEPA filtered shop vac, the exposure is negligible, especially if there are no children living in the apartment.
im sorry to hear that man.. i wish the mods of the sub would get some morals and remove them from the list. especially when they are telling new comers to the sub to check the recommended list..
if you want you could always test them for lead to make sure before you toss them. but i can say with a pretty high level of confidence and with a blind guess that they do contain lead.
https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
I work in plumbing and HVAC so I keep a few of these around anyway but it's not really a common household item.
Awesome find! But, do not forget to check for lead!! It's so quick and easy, but could seriously save your life. https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG?ie=UTF8&ref_=cm_cr_arp_d_product_top is an example one, make sure you get it from a reputable brand.
https://www.amazon.com/3M-717834209102DUPE-LeadCheck-Swabs-8-Pack/dp/B0051VARFG?th=1
something like this would do it but im sure there are others.
Looks to be from the Robinson Ransbottom Company. The 5 represents the capacity in quarts, I think:
I couldn't find anything mentioning that company and concerns about lead, and based on that and what I know of pottery and glazes (I'm a hobbyist), I wouldn't be concerned.
However, if you want to be extra sure, you can get a lead testing kit for about $10 on Amazon:
If it were a valued sentimental heirloom I wanted to be able to use, then I would begin with looking up the company name if possible. Sometimes is is possible to find out if a company used lead during a certain time period.
Next, make sure it isn't on the FDA Red List: https://www.accessdata.fda.gov/cms_ia/importalert_122.html
Then, I would try the lead test swabs that a person can buy pretty cheaply. You may not want to buy them from Amazon, but I'm linking here just to show what I mean: https://www.amazon.com/3M-717834209102DUPE-LeadCheck-Swabs-8-Pack/dp/B0051VARFG/ref=sr_1_5?crid=1E2Z941QTYFZ9&keywords=lead%2Btest%2Bstrips&qid=1666726358&qu=eyJxc2MiOiIzLjU3IiwicXNhIjoiMy4xOSIsInFzcCI6IjMuMjIifQ%3D%3D&sprefix=lead...
Use the swab on the bottom of the dish, where the glaze ends or on one potentially sacrificial small piece, because if there is lead, the swab might turn the glaze pink or red, and you'd lose your display value.
Get the 3M branded tests though.
These kits from Amazon are pretty cheap.
I'd test it for lead homie. Anything that old can't be trusted. https://www.amazon.com/3M-717834209102DUPE-LeadCheck-Swabs-8-Pack/dp/B0051VARFG?th=1&psc=1
They sell cheap kits online, for example: https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
Get these for reno projects.
There are this lead test strips, don't know if they work for metal though [Amazon link](3m lead check swabs (pack of 2), instant lead test (lc-2s24c) https://www.amazon.com/dp/B0051VARFG/ref=cm_sw_r_cp_apan_glt_fabc_BTSCFEPX8Y1RMD11PRFZ?psc=1)
Seconding the "test for lead" comments...
https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
Amazon sells them, I've seen them at Home Depot too. They're in the paint section, they're also used to check old paint for lead content.
​
https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG/
The test swab is $8 on amazon 3M LeadCheck Swabs, 2-Pack https://www.amazon.com/dp/B0051VARFG/ref=cm_sw_r_cp_api_i_q7iKEbZ2NK1N5
Edit: $8 for two
They are lead test swabs. I only have american links, but here ya go: https://www.amazon.com/dp/B0051VARFG/ref=cm_sw_r_other_apa_i_OzJODb499YY3W
You can buy kits like this online, or probably at your local hardware store.
I would be surprised if lead based paints were never used in Belgium.
If you're after a testing kit: https://www.amazon.co.uk/3M-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
Brico has an ok selection but staff generally aren't very knowledgeable. You can search their website to see what they sell, that's often quicker.
A good specialised paint shop is Miniox, but again they may not know about historical lead based paint use.
3M LeadCheck Swabs, 2-Pack https://www.amazon.com/dp/B0051VARFG/ref=cm_sw_r_cp_apa_i_A.ukCbYVVZYJW
Check the bricks and elements for lead before firing. If it tests positive I would not fire it indoors, and only use it for sculpture or tiles.
https://www.amazon.com/3M-051141936130-LeadCheck-Swabs-2-Pack/dp/B0051VARFG
ebay has an article about the different methods here (along with pros and cons) and if you look on amazon there's bunches of choices for lead swab tests, here's one