I’m thinking a clamp mount with a flexible arm like this one might work on the back of arm of the wheelchair. I don’t know if it’s large enough for a 12.9 inch iPad though.
Its actually an iPad holder lol. I have it clamped to the monitor stand so no vibrations from the bass shakers or wheelbase would rattle the keyboard. I dont use the top clamps and the keyboard just sits on the bottom two clamps
You could just buy an ordinary treadmill, and put a tablet mount on it. Or hell, even mounting a TV to the wall in front of the treadmill would be cheaper.
I use a several of these to add more functionality to my MonsterTech chair mount.
If you have an iPad, try out this IPad clamp. Pretty easy to clamp to your treadmill and watch Netflix or the hundreds or “virtual runs” that are on YouTube.
This is what I use for mounting my SP4 on my desk: Arkon TAB086-12 Heavy Duty Tablet Clamp Mount with 12 inch Neck
It works just fine with the size and weight of the SP4. Arm is super stiff making it hard to adjust, but you can be sure that it won't move.
If its not then maybe a solution could be this?
Then clamp it to the front of the hitbox? You could also take the clamp off it and maybe use just the frame? But then you'd be drilling into the hitbox and that's a little iffy since it may not hold very well.
I got this clamp mount from amazon and it's very good. It comes with multiple size "jaws" that you can use, which should fit any size iPad. Here's a photo of how I have mine on my C2.
Arkon TAB086-12 Heavy Duty Tablet... https://www.amazon.com/dp/B00BCSYZVY?ref=ppx_pop_mob_ap_share
I use one of these on a C2 dynamic but should work on a model d/e too:
So I bought the bellow back with my tab s6 and while I am able to use it with my s8 ultra it just barley fits and is a bit tight... I am hoping to find something better.
Arkon TAB086-12 Heavy Duty Tablet Clamp Mount with 12 inch Neck for iPad Pro iPad Air Galaxy Note 10.1 Retail Black https://www.amazon.com/dp/B00BCSYZVY/ref=cm_sw_r_apan_glt_i_JD4H875YDZ4D0SR8GBXQ
I use this mount attached to the arm beneath the pm5.
Arkon TAB086-12 Heavy Duty Tablet Clamp Mount with 12 inch Neck
https://www.amazon.com/Arkon-TAB086-12-Tablet-Galaxy-Retail/dp/B00BCSYZVY/
here you are, and my apologies - it was $35. it has a screw clamp on the front, the neck bends (with effort), but there's no bounce or sag during your ride. i'll show my setup if i can figure out how to add a pic to a post
Arkon TAB086-12 Heavy Duty Tablet... https://www.amazon.com/dp/B00BCSYZVY?ref=ppx_pop_mob_ap_share
I got this mount. It works well and it’s very sturdy.
Arkon TAB086-12 Heavy Duty Tablet... https://www.amazon.ca/dp/B00BCSYZVY?ref=ppx_pop_mob_ap_share
Hi,
You could always get one of these . . .
and here's a link with a picture of it on a bike:
I bought this and it works great: Arkon TAB086-12 Heavy Duty Tablet... https://www.amazon.com/dp/B00BCSYZVY?ref=ppx_pop_mob_ap_share
Also, look up the rowfree, which is more expensive but made specifically for C2
If you liked iFit on norditrack, you can use that with C2 but obviously the C2's info won't show on screen. You would just follow the s/m pace of the instructor.
For an ipad mount, I know only 2 options, although there may be more: (1) https://www.amazon.com/gp/product/B00BCSYZVY (Arkon TAB086-12 Heavy Duty Tablet Clamp Mount), and (2) https://www.rowfree.com/ .
I bought #1 and another mount from Amazon. #1 works well and the other one didn't because it wobbled and I couldn't get the angles right. #1 is very sturdy, doesn't wobble (or at least I don't notice it), and can be placed at proper angle without interfering with the chain (below the monitor and I'm 6 feet for reference of chain height while rowing). If you look at the reviews on Amazon, many people use it on C2 and it's been recommended on different websites, including one rowing App website that I can't remember now.
#2 is made specifically for the C2 and is more expensive. I never tried it so I can't comment on it. The only reason I didn't buy #2 was that I couldn't buy it on Amazon (and therefore didn't know if/how it could be returned) and it doesn't seem to have anything to secure the iPad (so I was concerned like my iPad could fall, even though I have no reason to believe it would). The iPad just sort of sits on it. It certainly looks nicer and cleaner than #1 though.
C2 sells their own iPad mount but it looks like the iPad is off center, which bugs me. I also read somewhere that C2 even told a potential customer that they shouldn't order it as it's being redesigned because it has an issue. I don't know if that's true, but that's what I saw in my research.
I am experiencing blisters, torn skin, and calusses because I'm a new rower. I bought gloves on amazon but I started getting blisters in different parts of my finger and I'm returning them. I'm now trying to tough it out to see if my hands will toughen up without gloves. There are some rowing specific gloves but I don't have any experience with them.
I bought this mat, which is a perfect fit for the machine and allows me to not clean up sweat from my hardwood floors after every workout: https://www.amazon.com/gp/product/B004IJG4NG/ SuperMats High Density Commercial Grade Solid Equipment Mat 29GS Made in U.S.A. for Large Treadmills Ellipticals Rowers Water Rowing Machines Recumbent Bikes and Exercise Equipment (3-Feet x 8.5-Feet) (36" x 102") (91.4 cm x 259.1 cm),Black
I have a Peloton and I have to say that it's an amazing experience. Really enjoy the coach aspect of it. Also, it's a really nice bike in terms of the hardware. That said, I recently got a rowing machine and then a retrofitted it with a screen ($30 "arm" from Amazon and an old extra iPad) and presto I have a "smart" rowing machine (I also got into a beta test of a new company that is producing the programming similar to what Peloton does). Anyway, long story short, I wonder if you could just get an arm and an old iPad and then subscribe to Peloton and then use your old spin bike. That might be a place to start and then if you and your wife like it you could jump in whole hog.
Arkon Heavy Duty Tablet Clamp Mount with 12 inch Neck for iPad Pro iPad Air Galaxy Note 10.1 Retail Black https://www.amazon.com/dp/B00BCSYZVY/ref=cm_sw_r_cp_apa_V8k8zb5FQGRJ7
This is what I'm running to hold my tablet and phone.
This leg pillow was a freakin lifesaver, I'm 6'2" and a side sleeper so the racks were not the best fit for me. Having this meant I didn't have a whole other pillow taking up space. A rack fan is a definite necessity. I also had a tablet mount like this so I could lay back in my rack and watch without having to hold anything up, made life really nice.
Arkon Heavy Duty Table Tablet Mount
I just used the included C clamp to mount it to the chair's arm.
We purchased one from Amazon
https://www.amazon.com/dp/B00BCSYZVY/ref=cm_sw_r_sms_api_fabc_ejCVFb3F0KFWS