What is Reddit's opinion of Syncwire 3.5mm Nylon Braided Aux Cable (3.3ft/1m,Hi-Fi Sound), Audio Auxiliary Input Adapter Male to Male AUX Cord for Headphones, Car, Home Stereos, Speaker, iPhone, iPad, iPod, Echo & More – Black?

From 3.5 billion Reddit comments

Ask around and see if anyone you know has a multimeter you can use to test the cable. Or just buy a new one - they aren't very expensive.

If you have even basic soldering skills, or a friend that does, the cable is pretty easy to make. Buy a TRS 5mm cable (with plugs on both ends), and a regular 5-pin DIN MIDI cable. Cut both cables in the middle, match up the wires to go to the right pins (look up the connections needed in the Korg's manual), and solder them together. Test the cable, then use heat shrink tubing (preferably) or electrical tape to insulate the wires. Now you'll have two known good cables, and you can customize the length to be perfect for your setup.

Syncwire 3.5mm Nylon Braided Aux Cable (3.3ft/1m,Hi-Fi Sound), Audio Auxiliary Input Adapter Male to Male AUX Cord for Headphones, Car, Home Stereos, Speaker, iPhone, iPad, iPod, Echo & More – Black https://www.amazon.com/dp/B01I0SI1SG/ref=cm_sw_r_cp_api_glt_i_90MQNX242V6AMT7A7T2A

You can use the wires in your picture as speaker wires. You will need a male to male tip-ring-sleeve (TRS) 3.5mm/1/8" adapter cord like this, if you buy an amplifier like the one I referenced before.

Are you searching for a auxiliary cable?, if so you could just buy any auxiliary cable from Amazon doesn’t have to be super high quality (What model of Momentum’s do you have? [1,2,3]) Momentum 1’s are wired from two onward they are wireless. Here is the cable I use : different sizes available -Syncwire 3.5mm Nylon Braided Aux Cable (3.3ft/1m,Hi-Fi Sound), Audio Auxiliary Input Adapter Male to Male AUX Cord for Headphones, Car, Home Stereos, Speaker, iPhone, iPad, iPod, Echo & More – Black https://www.amazon.com/dp/B01I0SI1SG/ref=cm_sw_r_cp_api_glc_fabc_D2H0QJP74KQ33FMYYGRS?_encoding=UTF8&psc=1

https://www.amazon.co.uk/Cable-Syncwire-3-5mm-Audio-Braided/dp/B01I0SI1SG/ref=sr_1_3?ie=UTF8&qid=1493674497&sr=8-3&keywords=headphone+cable

So something like this? into my TV's headphone port, then directly into the htpc, and I'll be able to pick up the audio in the headphones?

OK - I wasn't sure about the headphone output on the LG.

So with that information it's a pretty easy solution.

I would probably opt for the Mackie mixer since it already has a 3.5 mm input. A simple 3.5mm cable should be all you need to connect from the LG to the Mackie.

Like this

https://www.amazon.com/Syncwire-Braided-Auxiliary-Adapter-Headphones/dp/B01I0SI1SG

You might have to turn the volume way down on the LG TV because the headphone output signal used to drive headphones is a bit strong for the line level input the Mackie mixer is expecting. But other than that it should work fine.

For the Mackie mixer main outputs to the Rockville input connection you would need a dual mono 1/4" to RCA cable like this https://smile.amazon.com/Cable-Adapter-Stereo-Interconnect-Quarter/dp/B08TT82L1T

Look for an amplifier with an "aux in" plug. Then all you will need is a 3.5mm audio cable to connect the amp with a phone or MP3 player. Then both guitar and backing track will come through the speaker or headphones.

There are also headphone bass amplifiers that have no speaker and only work through headphones. They also have an "aux in" plug so the player can play along with a backing track. There are a number of different models.

so aux for car audio would be something as simple as this (from phone's 3.5mm jack to car's 3.5mm jack in center console?)
https://www.amazon.com/gp/product/B01I0SI1SG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

like would this work fine^?

thanks for your help by the way my friend

I have it plugged into the back of the io on my motherboard using an aux to aux cable

not sure of the exact model of the cable but it looks like this https://www.amazon.com/Syncwire-Braided-Auxiliary-Adapter-Headphones/dp/B01I0SI1SG/ref=sr_1_3?dchild=1&keywords=aux+cable&qid=1624443491&sr=8-3

it is being held with a boom arm

https://www.amazon.com/InnoGear-Microphone-Suspension-Adjustable-Snowball/dp/B01L3LL95O/ref=sr_1_6?dchild=1&keywords=boom+arm&qid=1624443537&sr=8-6

And it is connected into a extension box which has a ground pin and is connected into the wall.

I am an complete audio noob and not sure how to fix this problem

i am using realtek audio drivers with noise suppression enabled and it somewhat reduces the problem

I am using an Amd system with a cheap motherboard

i saw on an earlier post the motherboard is not the problem as someone with a more expensive motherboard had the same problem

So if I get the Atom amplifier, plug in the power cable, get a cable just like this one:

https://www.amazon.co.uk/Syncwire-Braided-Headphone-Samsung-Smartphone-Black/dp/B01I0SI1SG/ref=sr_1_3?dchild=1&keywords=3.5mm+to+3.5mm&qid=1615942139&sr=8-3

Plug one end of this cable into line out behind the E10K, and the other end into the Atom's 3.5mm, plug in my headphones, and I'm good to go?

I've never had such a setup so I'm sorry if I'm asking too many questions.

Heyho,

I hope this subreddit is a valid place to ask my question. If not kindly point me in the right direction.

I am currently setting up a very simple way of having both my phone and Alexa Echo audio on my Headset.

For this I am using

• 2 male/male 3.5mm AUX cables, one for the phone one for the Echo. Amazon link
• 1 Y 3.5mm AUX splitter (2 female, 1 male). Amazon link

• SteelSeries Arctis Pro Wireless headset. Amazon link

  • There is a separate transmitter for the headset which offers an AUX input

So this all works fine, as in I get the sound of my phone and the sound of the Alexa on my headset.

My issue is that the volume is a lot lower than if I do not use a splitter and directly connect my phone to the transmitter via AUX. Even if I simply disconnect the Alexa from the AUX cable the volume from my phone will be much louder.

My question now is:

Is this supposed to happen? Is this due to cheap components and could be solved with a higher quality splitter/cable? Or is there another way to maintain high volume on both inputs?

Please keep in mind that I have absolutely no knowledge in the area of sound and how it is transmitted.

Heyho,

I hope this subreddit is a valid place to ask my question. If not kindly point me in the right direction.

I am currently setting up a very simple way of having both my phone and Alexa Echo audio on my Headset.

For this I am using

• 2 male/male 3.5mm AUX cables, one for the phone one for the Echo. Amazon link
• 1 Y 3.5mm AUX splitter (2 female, 1 male). Amazon link
• SteelSeries Arctis Pro Wireless headset. Amazon link
  • There is a separate transmitter for the headset which offers an AUX input

So this all works fine, as in I get the sound of my phone and the sound of the Alexa on my headset.

My issue is that the volume is a lot lower than if I do not use a splitter and directly connect my phone to the transmitter via AUX. Even if I simply disconnect the Alexa from the AUX cable the volume from my phone will be much louder.

​

My question now is:

Is this supposed to happen? Is this due to cheap components and could be solved with a higher quality splitter/cable? Or is there another way to maintain high volume on both inputs?

​

Please keep in mind that I have absolutely no knowledge in the area of sound and how it is transmitted.