What is Reddit's opinion of AVLT Single 13"-43" Monitor Arm Desk Mount fits One Flat/Curved/Ultrawide Monitor Full Motion Height Swivel Tilt Rotation Adjustable Monitor Arm - Black/VESA/C-Clamp/Grommet/Cable Management?

From 3.5 billion Reddit comments

Its an AVLT Power from Amazon. I had to really tighten down the adjustment screws to hold it in place, but it works great.

For a good monitor arm I'd recommend this one from Amazon, while a bit pricy it should be more than capable of holding up that monitor. As for a keyboard what would your budget be? Also would you prefer linear or tactile switches? Also any layout restraints, do you absolutely need a number pad, arrow keys etc.

This isn’t what you were looking for, but leaving this here for anyone who googles this topic.

AVLT Single 13"-43" Monitor Arm... https://www.amazon.com/dp/B0819BLM2Z?ref=ppx_pop_mob_ap_share

This is the one I bought. Works really well ti clamp ink the desk. You need to buy a Vesa mount adapter though

I have it mounted on a AVLT Single 13" - 43", had to tighten the tilt tension though. The monitor comes with an adapter for VESA mount.

Note on the tilt tension: the arm didn't have issues with 38" LG but AW3423DW needs some tightening, possibly due to the adapter sticking out of the monitor.

I use this and it works great.

AVLT Single 13"-43" Monitor Arm Desk Mount fits One Flat/Curved/Ultrawide Monitor Full Motion Height Swivel Tilt Rotation Adjustable Monitor Arm - Black/VESA/C-Clamp/Grommet/Cable Management https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_api_glt_fabc_FC95A9K3SWTB0SDS4TEH?_encoding=UTF8&psc=1

AVLT Single 13"-43" Monitor Arm... https://www.amazon.com/dp/B0819BLM2Z?ref=ppx_pop_mob_ap_share

Rock solid. Look at my profile photos. This also has the best cable management I have ever seen. It blows everything else away. These new gas spring mounts are very reliable. The base is wide enough where there will be no damage to ur desk like the ergotron models. 2 arms cheaper then 1 ergotron & heavy duty spring.. I have 2 of the ergotron mounts in my office for G9 s and they are nice but then not the AVLT one for my home setup and it’s much better.

With 1in bamboo I would buy 2 of these so you don’t rip the desk in half. This is my favorite mount and I have a 59in monitor on it for a long time. Buying 2 and you will still save money vs buying ergotron and destroying ur desk will be less likely

AVLT Single 13"-43" Monitor Arm Desk Mount fits O... https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_sms_api_glt_fabc_K8NEH8B7RH7CNNS7CPJ8?_encoding=UTF8&psc=1

I purchased the expensive as hell ergotron mount with HD hinges as well = $550.. it wasn’t that great for this application. Although I use it at my office.

The $130 AVLT mount is by far the best for the Samsung G9. It has much more strength to hold up that beast, even off center. Ergotron a mount barely has the strength. This AVLT mount handles it with ease.

AVLT Single 13"-43" Monitor Arm Desk Mount fits O... https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_sms_api_glt_fabc_JMQNHA2Z9FC5SCWX5C7T?_encoding=UTF8&psc=1

Congrats it looks awesome! Idk if you are interested on mounting arms, but I got one for my legion Y44w-10, and it has freed up a nice chunk of my desk.

https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_apa_glt_fabc_5MATMNZ57A38SASD91E6?_encoding=UTF8&psc=1

It’s a CRG9. The arm is: https://www.amazon.com/AVLT-Single-Monitor-Desk-Stand/dp/B0819BLM2Z?dchild=1&keywords=avlt+single+13%22-43%22&qid=1619319144&sr=8-1&linkCode=sl1&tag=bevelishcreat-20&linkId=5cb5a68099e95f54656b878192beb817&language=en_U...

AVLT Single 13"-43" Monitor Arm Desk Mount fits One Flat/Curved/Ultrawide Monitor Full Motion Height Swivel Tilt Rotation Adjustable Monitor Arm - Black/VESA/C-Clamp/Grommet/Cable Management https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_api_glt_fabc_N37VJA8RFDGF6B3NR55X?_encoding=UTF8&psc=1

It isn’t rated for a 49” size, but the spec narrowly supports the weight.

I think I heard that one is a little more heavy but I got this one AVLT Single 13"-43" Monitor Arm Desk Mount fits One Flat/Curved/Ultrawide Monitor Full Motion Height Swivel Tilt Rotation Adjustable Monitor Arm - Black/VESA/C-Clamp/Grommet/Cable Management https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_api_glt_fabc_XVAKGJGBAYHXB87ZJKES?_encoding=UTF8&psc=1

This is the alvt dm monitor arm.

It works well, I just needed to tighten down the tilt mechanism. I did it with the monitor already mounted but would recommend tightening it down prior.

Tilt will be an issue if you dont buy a heavy duty arm for this monitor.

I had to get this so the tilt stops dropping due to complex center of gravity and the design from the monitor. https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_apa_i_8LmhFb949S0YB

Its an AVLT Power from Amazon. I had to really tighten down the adjustment screws to hold it in place, but it works great.

Sure, its the AVLT-Power Single 33 lbs Monitor Desk Stand from Amazon. Monitor Stand Unfortunately, it looks like they are out of stock right now.

https://www.amazon.com/gp/product/B0819BLM2Z/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - It was tricky because there aren't really any specific ultrawide mounts. Just have to make sure it supports the weight. I did some research and found a few people got that one I just linked. Really, the only other thing out there that supports the weight is the Ergotron mount for about $300

<strong>https://www.amazon.com/gp/product/B0819BLM2Z/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1</strong>

&#x200B;

&#x200B;

After I found it to be the best out of the bunch I blasted own on all Samsung G9 sites.

Hi im using this arm and adapter for the PG42UQ hold well

https://www.amazon.com/gp/product/B0819BLM2Z/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s01?ie=UTF8&amp;psc=1
https://www.amazon.com/gp/product/B07MG8DCTL/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&amp;psc=1

> AVLT arm

https://www.amazon.com/AVLT-Single-Monitor-Desk-Stand/dp/B0819BLM2Z?ref\_=ast\_sto\_dp&amp;th=1&amp;psc=1

I also have a very heavy ultra wide and went through 3 different arms until I found one that would eventually droop. AVLT Single 13"-43" Monitor Arm... https://www.amazon.com/dp/B0819BLM2Z

AVLT Single 13"-43" Monitor Arm... https://www.amazon.com/dp/B0819BLM2Z?ref=ppx_pop_mob_ap_share

This is what I use. Works like a charm

How specifically do you mean that style? Quick search found 20 and even 33lb ones on Amazon in that basic style. 17 seems to be where most start and 20 is common.

33:

• https://www.amazon.com/AVLT-Single-Monitor-Desk-Stand/dp/B0819BLM2Z/
• https://www.amazon.com/Loctek-Monitor-Spring-Weighting-13-2-33/dp/B01BXP9LT6/
• https://www.amazon.com/Mount-Heavy-Duty-Single-Monitor-Monitors/dp/B07QYCW5Q8/

20:

• https://www.amazon.com/AOC-AS110D0-Supporting-Included-Ergonomic/dp/B08X51B91V/
• https://www.amazon.com/Mount-Articulating-Adjustable-Compatible-Computer/dp/B01MXEIA00/
• https://www.amazon.com/AVLT-Power-Single-14-3-Monitor-Mount/dp/B07PVGL7H2/
• https://www.amazon.com/Mount-Articulating-Adjustable-Compatible-Computer/dp/B01MXEIA00/

17:

• https://www.amazon.com/Single-Monitor-Mount-Stand-17-6lbs%EF%BC%88Black%EF%BC%89/dp/B08FCCBRS4
• https://www.amazon.com/Mount-Monitor-Single-Computer-Monitors/dp/B07JNHM69C/

/u/piccolom and /u/LordNix82ndTAG

I'm not OP, but i use a samsung 49" C9. the arm i got was this &quot;AVLT&quot; one except when i got it, there was an option for white (looks like it's only in black now, but idk). It also has 2 USB 3.0 pass throughs, but the one in that link seems to omit that.

this is in my purchase history, but that other link above is what comes up when i try to get product details...

>https://www.amazon.com/dp/B0819BLM2Z/ref=cm\_sw\_r\_sms\_api\_glt\_fabc\_K8NEH8B7RH7CNNS7CPJ8?\_encoding=UTF8&amp;psc=1

thanks for sharing this. I almost have an headache looking for arm monitor review on YT

What about this? Will it work. Amazon link

Your looking for a monitor arm. Something like this https://www.amazon.com/AVLT-Single-Monitor-Desk-Stand/dp/B0819BLM2Z/ref=mp_s_a_1_2_sspa?crid=CHFO1XH5B0VT&amp;keywords=hydraulic+monitor+arm+heavy+duty&amp;qid=1640986142&amp;sprefix=hydraulic+monitor+arm+hea%2Caps%2C66&amp;sr=8-2-spons&amp;psc=1&amp;spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMlJYSVJVQlUxQ1E3JmVuY3J5cHRlZElkPUEwMTM1MjQxM1M5MDlJMzFISUVHUCZlbmNyeXB0ZWRBZElkPUEwMjYwNTEyQVIyOEczQlcwVjcwJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

But do your research and make sure whatever you get supports the amount of weight required. I’ve used one for a smaller monitor.

&nbsp;

^Item&amp;nbsp;Info&nbsp;|&nbsp;Bot&amp;nbsp;Info&nbsp;|&nbsp;Trigger

24 inch deep table here I got from Ikea. I was concerned of the exact same issue you have right now, and I was planning to buy the 38 inch LG Ultrawide (38GN950). I was torn between the 38" and 34", thinking the 38" might be too big for my table or for my use.

I pushed my luck and bought the 38". I live in the Middle East and I bought this screen off of Amazon US, so you can imagine all the risks with shipping an expensive monitor halfway across the globe. Anyway, I AM SO PLEASED with the 38" on my 24" deep table! I cannot imagine 34" let alone your 29" inch option.

P.S. The stand of my 38: LG takes up more than half the depth of the table. So I chucked the stand and got this desk mount. Sturdy, affordable, holds the weight of my 38". Been using it for almost a month now, no droop or loss of mount tension. Screen stays/stayed up just like day 1.

Pics for your reference (Do ignore my messy room):

1. My 24 inch desk with measuring tape for reference
2. My setup
3. My setup from the side
4. My setup from the back with the mount

https://www.amazon.com/dp/B0819BLM2Z?psc=1&amp;ref=ppx_pop_dt_b_asin_title

They are awesome. The stands that come with these monitors are nice are adjustable, but I hated how much room they took up on my desk. I originally bought the ergotron hx, but it was honestly overkill for most monitors under 49".

Sure thing! I went the cheap route and had a scare...

So I have been using this AVLT mount and just last night the pivot snapped and the G9 swung down hard onto my desk. D'oh!

I immediately ordered the the HX ultrawide mount that includes the HD pivot and is basically designed for the G series with the 1000r curve.

I guess the only other option is this but no thanks. I'll let you know if the HX is worth the money. If it prevents last night from happening again, it absolutely is.

So I have been using this AVLT mount and just last night the pivot snapped and the G9 swung down hard onto my desk. D'oh!

I immediately ordered the the HX ultrawide mount that includes the HD pivot and is basically designed for the G series with the 1000r curve.

I guess the only other option is this but no thanks. I'll let you know if the HX is worth the money. If it precents last night from happening again, it absolutely is.

Seems like if you have one you don’t need the other no? you can pick up the adapter on ebay and this arm will work with the G9

AVLT Single 13"-43" Monitor Arm... https://www.amazon.com/dp/B0819BLM2Z?ref=ppx_pop_mob_ap_share

https://www.amazon.com/gp/product/B0819BLM2Z/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1

I purchased your mount first with heavy duty hinge. I wasn't happy with the cable mgmt track but in. I found this and it is so much stronger than the ergotron mount. I gave mine mount off center as well. Took me 5 mounts before I made a decisions. $500 mount setup looses to $130 setup. I know it seems silly, but I just posted a video and you can see how the mount handles this beast of a g9

AVLT Single 13"-43" Monitor Arm... https://www.amazon.com/dp/B0819BLM2Z?ref=ppx_pop_mob_ap_share

I just got one of these https://www.amazon.com/dp/B0819BLM2Z?ref=ppx_pop_mob_ap_share

It's the cheapest that supports my 43", 25lb LG monitor. I'm happy with it so far

Yes it is.

Arm: AVLT 13&quot; - 43&quot;

Thank you! The monitor is the Samsung CRG9.

The arm bar was hard to find. This is the one I went with because the max weight it supports is the same as the monitor: AVLT 13&quot; - 43&quot;

https://www.amazon.com/dp/B0819BLM2Z/ for the G9, hit me up in a few days to see if any change on the tilt moving as that is a popular concern and question (so far in past day and change it hasn’t moved)

https://www.amazon.com/dp/B07X48X4KM/ for the G5, and no issues at all with this and have been using since feb 22.

https://www.amazon.com/dp/B0819BLM2Z/

I just received my G97T today, hoping to have a pleasant experience with it. Bought at best buy so have 45 days to at least test it out, but I want it to work!

So far so good, but its only been in use 2 hours or so.

I did purchase this arm for mine, was going to post on here (thats what i came to do and seen this post at the top:P) and see if anyone else has tried it. https://www.amazon.com/gp/product/B0819BLM2Z/

It says it supports up to 33lbs, and on the website it says 31.1lbs without the stand, so hoping this works out as the nice ones everyone talks about are 4-500$ :|

I’ve been using this for about a month and it’s working great.

The key is to tighten the tilt bolt super tight before putting the monitor on, I had a slight angle in it to anticipate some droop. Also the tension adjustment is counterintuitive to how you normally tighten/loosen thing from what I remember.

https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_api_glt_fabc_14RYJJ249DYMXMJ9CD2C?_encoding=UTF8&amp;psc=1

Loving it:

https://i.imgur.com/qpCvOyT.jpg

Link to arm for those wondering AVLT monitor arm

Here it is: https://www.amazon.com/dp/B0819BLM2Z/ref=cm_sw_r_cp_apa_i_rqGoFbFN14JNR

>AVLT-DM40-1 arm. One of the more heavy-duty arms, probably overkill for my monitor, but found a deal for it on Amazon $100 used.
>
>https://www.amazon.com/dp/B0819BLM2Z/ref=emc\_b\_5\_t

AVLT-DM40-1 arm. One of the more heavy-duty arms, probably overkill for my monitor, but found a deal for it on Amazon $100 used. https://www.amazon.com/dp/B0819BLM2Z/ref=emc_b_5_t

AVLT-DM40-1 arm. One of the more heavy-duty arms, probably overkill for my monitor, but found a deal for it on Amazon $100 used. https://www.amazon.com/dp/B0819BLM2Z/ref=emc_b_5_t

AVLT-DM40-1 arm. One of the more heavy-duty arms, probably overkill for my monitor, but found a deal for it on Amazon $100 used. https://www.amazon.com/dp/B0819BLM2Z/ref=emc_b_5_t