I've experienced this issue as well - my workaround is using this headphone amp that I have ($24 on amazon, link below) in between my interface and the headphones, and it provides an extra level of gain, which gets me right in the sweet zone
Behringer Microamp HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier by Amazon.com Learn more: https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_em_r_mt_dp_U_qJR5CbD2RMWYB
Using a basic splitter like that is gonna end up showing your headphone amp either a super high or super low impedance. Something like https://www.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30/ref=mp_s_a_1_1?dchild=1&keywords=multichannel+headphone+amplifier+behringer&qid=1611058341&sr=8-1 is a better choice
Would give you individual level controls between your headphones and your recording gear.
Wouldn't hurt to try the passive splitter you linked though. It will either work well, kinda work, or not work. Won't damage anything.
Just don't run the speaker out into anything other than a speaker at the same impedance rating.
Unfortunately, things aren't that simple.
Without an amplifier you are left with line level audio and no way to control the volume.
It could be too loud or too quiet, depending on the headphones and the source (I don't know how loud the signal is). With an unpowered splitter, the TV's own inputs will also have an effect.
The amplifier is pretty cheap (those pocket Fiio's are around $25), and you might be able to get away with an unpowered splitter, which should save a bit of space/money, but I can't say for certain, so you might just want to go the powered route.
If your venue wanted to support headphones straight-up, there's the option of running a splitter to the TV/stream, and one of the other outputs to something like this.
I can really recommend the ifi ZenDac though. It's 199€ without sale, but it's a great DAC/Amp. Easy to use, even has a balanced out and can be used solely as a DAC or pre-AMP if you ever get a solo AMP. They can easily drive 250 Ohm Beyerdynamics, kinda do it for the 600 but not really and the Bass booster function is awesome if you are into bass. Easily a thing you buy and then you can leave the market for as long as it works if you don't go crazy.
https://www.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30
This is the one I have, Behringer isn't known for having good products, but this one seems to do the job with no noticeable difference (unless you crank it to the max, but then you'll probably want to tear your ears off). It has a good metal casing and 4 knobs so you can potentially have 3 more headphones.
I use this cheap headphone amp to split the 1/4" headphone output from my Presonus audio interface into 4 outs:
I have 2 pairs of headphones, an SVS sub, and the tactile shakers all running off the mixer, then the Presonus has additional balanced outs that I use for some Focal studio monitors.
Overall, its a pretty cheap way to feed 7 different speaker/headphone sources.
These are among the best deals for headphone amps/mixers. I've been using one to route my computer audio out to multiple headphones, studio monitors, and subwoofers.
I'd recommend finding a good multi-pack of headphone adapters, as you'll need to use them to adapt the 1/4" ins/outs, but that's really the only weak side I've found to these.
There are absolutely professional recording studios that use these as a cheap way to get a handful of headphone feeds into live rooms for musicians. The next step up is rack mounted options from Mackie or Presonus that start around 200$+, but rack gear is huge.
Behringer makes an affordable headphone amp. It will allow each user to control their own master volume, however they probably won't be able to control the mix of each mic.
https://www.amazon.com/dp/B000KIPT30?ref_=cm_sw_r_cp_ud_dp_TQ40T18W77881QGZ280W
It sounds like you’re gonna want something like this.
This is if you want 4 identical headphone outputs. You can try searching for “headphone amps” for more brands and styles if you want.
If you need each pair of headphones to have a different audio mix, you’ll likely need an interface or mixer of some type.
>willing to get an amp
would this work?
Not sure what you mean by "stereo and not 3.5mm"
A 3.5mm jack/port can be stereo (TRS), mono (TS), or mic-inclusive (TRRS) for mobile devices.
Same goes for 1/4" jacks/ports.
Here's an easy solution where you can connect your mixer headphone output to this little guy and give up to four people their own individual volume control. https://smile.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30
You can get a headphone amp. Here’s an inexpensive one that behringer makes
Behringer Microamp HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier,Silver https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_api_glc_fabc_KUt6Fb9EKQVE3
Just keep in mind these are 1/4” ports not 1/8” like you have on average headphones. You can get converters but get decent ones because I’ve had a bad experience with a cheap one.
Looking for DAC/AMP for PC with multiple volume controls. I want upgrade my PC audio but I want to get an AMP that has multiple volume controls. Example: a separate volume control for speaker output and separate volume control for headphones output, etc. That way I do not have have to unplug any cables or change anything in the software. Currently I am using this but I want to have something that gives better sound. Any other suggestions are welcomed.
Looking for DAC/AMP for PC with multiple volume controls. I want upgrade my PC audio but I want to get an AMP that has multiple volume controls. Example: a separate volume control for speaker output and separate volume control for headphones output, etc. That way I do not have have to unplug any cables or change anything in the software. Currently I am using this but I want to have something that gives better sound. Any other suggestions are welcomed.
This little guy changes the game for subpac usage: 4-Channel Stereo Headphone Amp
My setup goes from computer > Focusrite 2i2 (though all you need is any headphone jack) > 4 channel amp > 2 subpacs and 2 headphones. Great for listening sessions with a friend or watching movies.
My biggest complaint about the M2/M2x is that the amp introduces a lot of noise and the gain adjustment is a pain to balance against different impedance headphones. This solves both of those problems for about $30. The one I linked is out of stock, but there are several identical ones you can find.
You can use four or five of these 4-channel headphone amplifiers. You can feed them with splitter cables out of your Mackie mixer with no quality loss. It's just gonna require a jungle of cables and connectors for that number of headphones.
This is definitely not an ideal set up but you could use one of these Behringer MicroAmp
You’ll need some 1/4in to 1/8in adapters for most headphones.
Theoretically you could run 1/8in to 1/4in adapter out of the iphone/iPad then use a TRS cable until the MicroAmp and just run individual headphones into the MicroAmp so everyone has their own headphone mix.
We use this MicroAmp every week on our podcast but your set up is again, not ideal. I’m just assuming this should work fine.
If you play consoles and use a capture card in OBS, you should be able to use a monitor to put your sound through your PC. If you're just using a PC, you can use your PC's sound output as normal.
For hardware, you could get what's called a "Headphone Amp" like this one that I use (~$25) to let multiple people listen to your audio (Just be aware that the headphone jack is 1/4 inch like an instrument cable, not 1/8 inch like most computer headphone jacks).
I also believe that OBS lets you monitor your audio inputs; this is available in "Advanced Audio Properties". I assume that you're using OBS (and if you're not, you definitely should consider it- in my opinion it is hands down the best recording software for this application).
Also, you can record separate tracks in OBS; there's a bunch of tutorials on that. Just search "OBS separate audio tracks" and you should get a good idea of what you can do. That way you can edit your mic audio or your game audio individually without interfering with the other track.
Line-in is 3.5mm or 1/4'' stereo jacks. If you have that option as an input then anything with a headphone jack could be used with it.
I think that something like this would work for you and your situation. You can connect up to 4 headphones to it and each channel can be adjusted individually. You would plug your source device into the line in port using a 1/4'' jack and be able to listen to both.
I don't know how good that item is, but Behringer is usually a solid buy.
Sorry, would you mind if I asked a follow-up? Let's say I were to go for something extremely cheap like this:
https://www.amazon.co.uk/gp/product/B000KIPT30/
Do these serve, functionally, the same purpose, or is it that low-price for a reason i.e. something's missing?
Hi!
I need a way to practice, use all my pedals, and not drive my wife crazy. I currently have a Digitech Trio on my practice board that I use as a headphone amp, but it's just not loud enough.
My question: Could I plug my guitar (through pedals) straight into a Behringer HA400 MicroAmp and use it as a headphone amp? https://www.amazon.com/Behringer-HA400-BEHRINGER-MICROAMP/dp/B000KIPT30/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1514498909&sr=1-3&keywords=headphone+mixer
Yeah, I actually have the control room out go to the following headphone "microamp" (not sure if that is considered a mixer):
https://www.amazon.com/gp/product/B000KIPT30/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Since I usually only have 3 headphones plugged in, that means the 4th is free so hypothetically maybe I could have the 4th headphone signal go to your normal headphone jack in the smartphone (or camera, etc). Would that make sense?
I'm also looking for something similar this 4 channel mixer. But I was wondering if it'd be able to handle my headphones which are 250ohm and powering my speakers? If anyone else could help? Maybe calling /u/ZeosPantera would have some input?
Its not dumb man, we all asked these same questions at one point.
You'll want a headphone amp like this Behringer 4 Channel Amp. The reason I say get an amp over a simple aux splitter is that you need the ability to independently control volume levels for each set of headphones. For instance, you might want your headphones up a little louder than the vocalists monitoring headphones should go, and with a splitter, you cant do that. Hence, headphone amp (and they're comparatively cheap).
Hey there, I have a modmic that I would like to get sidetone / 0 latency self-listening / whatever you want to call it out of. Do I need some sort of device for this or can I do this with Windows?
Also, I just got a pair of DT 770 Pro 80 ohms and hear all over the place that they get a massive bump in quality on the low end with some amplification. Am I safe going with something cheap like this? Is there some device that can do both of what I want in one? Thank you very much for your help.
There are definitely splitters like that. A quick google search and I found this. It's not portable, but I'd be willing to bed someone makes something like it that's portable. It would be just like my amps, except with two separate outputs, each volume adjustable
That thing looks super useful; but I was aiming for as budget and simplistic as possible, and I suspect I found it (I bought this one earlier.)
Thanks for the help though!
There aren't any headphone jacks in the new instruments. The cheapest way I've found is to get a Behringer MicroAmp with the appropriate adapters. This is what I use and it works great.
I think you're looking for something like this:
http://www.amazon.com/Behringer-HA400-BEHRINGER-MICROAMP/dp/B000KIPT30
Says headphone amp, but should work fine for the speakers as well. Though I'm sure audiophiles might disagree. They'd also spent 5-10x as much.
Just posting back in case anyone searching for the same thing, but I think I'm going to give this a try. For £20 plus the cost of some 3.5mm to 6.35mm adapters it's probably worth a punt.
Thanks! I'm concerned about internal quality. I understand every device it passes through is going to degrade audio quality to an extent. I would rather spend $100 on a mixer that breaks in 3 years that has superior audio quality over one that has standard quality but lasts forever.
With that, this seems to be the choice, proving the audio quality is not degraded http://www.amazon.com/dp/B000KIPT30/
EDIT: I stand corrected, that is NOT what I want. it is an amp rather than mixer. I sure am Derpy today
I use a Behringer x1222usb mixer and three ATR2100-USB Microphones. I got the ATR2100s because I wanted the flexibility to be able to plug them directly into my Mac. I then have two Behringer Ultravoice Xm8500 Microphones as backups for when we have additional guests.
If I were doing it all over again I would have saved some money on the mics and bought 4 of the Xm8500s and just 1 ATR2100 (to plug directly into my computer when I needed to).
The x1222 mixer works fine, though I'm beginning to wish I had gotten a mixer that can record multiple audio tracks so that I could do some more fine tuning to individual audio levels in post (until then, I recommend a great program, called Levelator, farther below that can help with this).
You'll need decent cables for each mic, which will cost more than you expect--from what I've seen looking for cables with Neutrik connectors is usually good practice. There's also the matter of decent mic stands and pop filters as well.
You'll also probably want head phones for each podcaster so that they can hear themselves whenever they drift off mic. Amazon basics headphones are probably good enough for anyone not controlling the mixer. Then you'll also need a headphone amp (which splits the headphone signal and lets each person control their own headphone volume), for example. And you'll need several (at least one per set of headphones plus a couple spare) 6.35mm (1/4 inch) Male to 3.5mm (1/8 inch) Female headphone jack adapters.
If you want to do Skype interviews, you'll need a mixer with an AUX send port. You'll also need an iMic audio device, you can find out more about that and the other audio cables you'll need here.
Regarding software. I'd personally recommend Audacity over Garage Band, I just feel like I have more control over the sound with Audacity. Once you clean your audio up a bit (remove background noise, compress, run a limiter, etc) you should consider running it through the program Levelator which does great things to equalize voice levels.
I'm new at this as well, having only recorded 8 times, but if you want some more tips from someone else who is just starting out--just let me know.
BEHRINGER MICROAMP HA400 compact headphone amplifier $25
These things are great if you can afford one, but if you're willing to spend just a few extra minutes learning how things work and shopping around you can accomplish the same thing for much cheaper.
One of these coupled with one of these will accomplish the exact same thing for two hundred bucks. You could probably get even cheaper if you don't need six channels or vocal effects.
A Jamhub is basically just a mixer that's a little simpler to use because all of the routing is set in stone for you out of the box. They're neat, but way overpriced for what they actually are. Doesn't take much know-how to learn your way around a decent mixer and end up with something much more flexible for a lot less money.
I think this should work.
You have options. You need to have some way of sending dual 1/4 inch out ( stereo ) or one (mono) 1/4 out of your pedal into a headphone amp.
If you go the route of this behringer : Behringer MICROAMP HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier Black, Silver https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_api_glc_i_C1X3XY4V9ZJFCK1BJRKM?_encoding=UTF8&psc=1
You’ll need a cable like this : https://www.sweetwater.com/store/detail/STP201--hosa-stp-201-insert-cable-1-4-inch-trs-to-dual-1-4-inch-ts-3-foot?mrkgadid=3303550016&mrkgcl=28&mrkgen=gpla&mrkgbflag=0&mrkgcat=accessories&acctid=21700000001645388&dskeywordi...
Or you could do something like this:
Or if an interface runs in standalone mode or if you don’t mind hooking it up to a computer you could do something like this (utilize the direct monitor) :
BEHRINGER Audio Interface, 1x XLR/TRS 1x 1/4" 2X RCA USB, Black, 1-Channel (UM2) https://www.amazon.com/dp/B00EK1OTZC/ref=cm_sw_r_cp_api_glc_i_D01H7BTDPC5Z4KJHQ69D?psc=1
Thanks so much! Probably this would do the job then: https://www.amazon.co.uk/Behringer-HA400-Microamp-Headphone-Amplifier/dp/B000KIPT30/
I hope this isn't a bother (please feel free to ignore this message) but I was wondering you could advice me on something:
I managed to buy the refurbished LP5 from ebay and it finally arrived today! Very exciting, haven't opened it yet but I wanted to get one of these headphone amplifiers. Someone mentioned I'd probably need an RCA adapter, but for the life of me I can't figure out which sort of adapter specifically I'd need?
If I'm understanding correctly, it should be simple to connect this amplifier to the turntable, but I'd need an adapter between the headphones and the amplifier? Does something like this work? I just wanted to check before ordering.
Thanks again for your help and the recommendation to go for the refurbished AT-LP5!
Aha, perfect thank you!
Do you know if something like this would be sufficient by any chance?
Would something like this good enough to use? Thanks :)
Or is it worth buying something more expensive
You could try a signal splitter with an integrated amplifier, like this one: https://www.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30
An inexpensive splitter is what you are looking for. You probably want one male connection coming out of your audio interface to two female of whatever your headphone connection is.
If you have a little more in your budget though. I'd recommend the Behringer HA400 ) https://www.amazon.ca/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30 ) as it is what I use, so my brother and I can have independent volume on both headphones and I have room for more guests.
You could get 5 cheapish handheld XLR mics like the Behringer Xm8500 and put some foam windshields on them. They should work fine handheld if you are sitting around on sofas.
You would need some sort of mixer that works as a USB interface or just an interface. Most of the cheaper interfaces have a maximum of 4 XLR inputs so you might be better with a mixer on your budget. The Behringer X1222usb would do the job. You would only get a stereo mix into the computer, so would need to get the levels/mix right on the mixer.
You would need 5 XLR cables and maybe some headphones (people could use whatever they have). If you want everyone to be able to monitor them you would want a headphone distribution amp, but the cheaper ones have a maximum of 4 outputs usually. The one I have is the Behringer HA400 https://www.amazon.co.uk/dp/B000KIPT30/ref=cm_sw_r_cp_apa_i_RA8YRES99231WBTFJJN0?_encoding=UTF8&psc=1
The pre-amp will be enough to drive them, but they will be quieter than 80 ohm headphones, or any earbuds.
Pick up a Behringer HA400 MicroAmp.
https://www.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30
Ive used mine for abut 5-6 years now for collaborations / listening sessions for mix reviews.
Its not an audiophile headphone amp by any means, but it definitely doesn't degrade the signal hardly at all, and offers headphone amplification for 4x 200+ ohm headphones.
You'll need a 1/8" to 1/4" headphone adapter for each pair, but most decent headphones come with their own adapter.
I don't have any to suggest, as it's something I don't use myself - sorry.
But I had a look on amazon and saw this: https://www.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30/ref=sr_1_9?keywords=preamp+3.5+mm&qid=1575370233&sr=8-9
It's cheap, should do what you need it to do and is easily returned if it's shit.
Apologies for not being able to help any further.
Nobsound Passive 4way audio/headphone splitter/switcher
There will be other audio switchers in the related box with different inputs.
Behringer HA400 Microamp 4 Channel Stereo Headphone Amplifier
As others have said, Behringer Microamp HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_apa_i_JDB7DbNV0RHG4
You will need volume control and amplification with a headphone amp.
Cheap:
Add 1/4 to RCA Adapter and 1/4 to 3.5mm Adapter if you don't already have one.
Much better:
So far I'm going to check out:
And do you think this would be a good buy? I assume you'd get what you pay for, but I'm just wondering if even a cheaper option to get started in DAC's would make me want to go full nelson into DACs.
​
....and I've come unprepared. I'm looking to maybe buy some M50x's or something. I honestly get in here, start reading and end up overwhelmed. Sorry if it seems I'm piggybacking your thread, but it started as a question and has ended up here ha. So any suggestions for entry level headphones?
I'm looking to buy something pretty barebones to replace my shitty Crosley, which I'm pretty sure broke.
​
I'm looking to get an AT-120/60 (depending on my exact budget, not decided),
and this for a headphone amp. https://www.amazon.com/Behringer-HA400-Ultra-Compact-4-Channel-Headphone/dp/B000KIPT30/ref=sr_1_4?ie=UTF8&qid=1544988030&sr=8-4&keywords=headphone+amp
Is there anything I'm missing here (any more things to buy along with that)? Would that amp work? I'm not looking for perfect audiophile quality, just something to play the records. I'm new to this whole thing, so any advice would be appreciated.
I wouldn't recommend that. But something like this wouldn't be bad.
( https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_apa_a8XOBbGV9G15Q)
I think you can split the signal before it goes to the speakers. One to the powered speakers and the other to a subwoofer. Hopefully someone else can confirm.
4 Channel Headphone Amp. You may also need a switch box or mixer before it if you want to have both your PC and a Bluetooth adapter connected.
Hi everyone. Thanks for the replies. In thinking more about this, I really am not so interested in saving the money. The Zoom H6 costs about $350, and the Focusrite Scarlett 2i2 is about $150. That savings is great, and the volume control improvement hits the mark, but there are other downgrades that I might miss now from the H6, such as 4+ inputs and the on-unit input meter displays. All just to not have the crappy headphone output controls. Due to this I think I'm leaning towards another solution: a headphone amplifier, like thishttps://www.amazon.com/gp/product/B000KIPT30/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Hey guys, got a bunch of questions about amps. Forgive my ignorance on this one, this world is all new to me.
Alright, so, I'm looking to buy an Audio Technica LP120 in the next couple of weeks and I'm trying to get a gauge on how much money I'm going to need to be coughing up when I place my order. From my research, it appears that this turntable does not have a dedicated headphone jack, but there's a built in preamp, which seems great just for price reasons (yes, I've heard that a lot of people rip out the internal preamp because it's not great, but that's a down the road upgrade for me).
So, it looks like I just need an amplifier for my headphones. I'm only going to be using headphones for now due to my living situation- no speakers (I prefer headphones anyways). So I need a dedicated headphone amp, correct? Now, I really don't want to stack another $100 on top of my purchase, so I'm trying to find which amplifier I need at a decent price.
The only one I've seen directly recommended for turntables is the (Schiit Magni)[https://www.schiit.com/products/magni-3]. It does look very nice, but... it's $100. That's a lot of extra money.
I've searched "headphone amplifiers" on Amazon, and found many that are far cheaper. Here's a few that I found from that search:
BEHRINGER MICROAMP HA400 https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_api_ezNxAb6TX5RTD
FiiO E10K USB DAC and Headphone Amplifier (Black) https://www.amazon.com/dp/B00LP3AMC2/ref=cm_sw_r_cp_api_FzNxAbTHH3TPD
SMSL T2 2X6J9 Super Low Ground Noise Vacuum Tube Headphone Amplifier, Integrated Tube Amplifier, Audio, HIFI, Stereo, Output Protection for Headphone https://www.amazon.com/dp/B06XYJB7S8/ref=cm_sw_r_cp_api_bANxAbKY293SW
That first one is about what I'd like to spend, but here's where I'm confused. I'll bold this, because that's a whole lot of writing, innit?
It looks like those all have mono inputs. Is that correct? The Behringer and the FiiO for instance, only have a single input. I need one with two stereo inputs (white and red), right? Does a turntable even output sound in stereo? From what I've seen, the turntable I'm buying has standard white and red cables with it, left and right channels, which means that my amplifier needs to have those two inputs like the Schiit Magni does, right? If none of those specific listings are an option, is there one out there less than $50 that would work, or am I stuck with something expensive like that? What do I even search to try to find that? Why would the Schiit come with left and right inputs but those others don't?
Thanks for reading, I appreciate it. Sorry for the barrage of questions, I'm just really kind of lost in regards to the differences between headphone amps.
Hey guys, got a bunch of questions about amps. Forgive my ignorance on this one, this world is all new to me.
Alright, so, I'm looking to buy an Audio Technica LP120 in the next couple of weeks and I'm trying to get a gauge on how much money I'm going to need to be coughing up when I place my order. From my research, it appears that this turntable does not have a dedicated headphone jack, but there's a built in preamp, which seems great just for price reasons (yes, I've heard that a lot of people rip out the internal preamp because it's not great, but that's a down the road upgrade for me).
So, it looks like I just need an amplifier for my headphones. I'm only going to be using headphones for now due to my living situation- no speakers (I prefer headphones anyways). So I need a dedicated headphone amp, correct? Now, I really don't want to stack another $100 on top of my purchase, so I'm trying to find which amplifier I need at a decent price.
The only one I've seen directly recommended for turntables is the (Schiit Magni)[https://www.schiit.com/products/magni-3]. It does look very nice, but... it's $100. That's a lot of extra money.
I've searched "headphone amplifiers" on Amazon, and found many that are far cheaper. Here's a few that I found from that search:
BEHRINGER MICROAMP HA400 https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_api_ezNxAb6TX5RTD
FiiO E10K USB DAC and Headphone Amplifier (Black) https://www.amazon.com/dp/B00LP3AMC2/ref=cm_sw_r_cp_api_FzNxAbTHH3TPD
SMSL T2 2X6J9 Super Low Ground Noise Vacuum Tube Headphone Amplifier, Integrated Tube Amplifier, Audio, HIFI, Stereo, Output Protection for Headphone https://www.amazon.com/dp/B06XYJB7S8/ref=cm_sw_r_cp_api_bANxAbKY293SW
That first one is about what I'd like to spend, but here's where I'm confused. I'll bold this, because that's a whole lot of writing, innit?
It looks like those all have mono inputs. Is that correct? The Behringer and the FiiO for instance, only have a single input. I need one with two stereo inputs (white and red), right? Does a turntable even output sound in stereo? From what I've seen, the turntable I'm buying has standard white and red cables with it, left and right channels, which means that my amplifier needs to have those two inputs like the Schiit Magni does, right? If none of those specific listings are an option, is there one out there less than $50 that would work, or am I stuck with something expensive like that? What do I even search to try to find that? Why would the Schiit come with left and right inputs but those others don't?
Thanks for reading, I appreciate it. Sorry for the barrage of questions, I'm just really kind of lost in regards to the differences between headphone amps.
I have a Behringer HA400 Amp and a Neoteck Dac. Can anyone inform me of how it would be properly setup to get audio out from the headphone inputs of the amp?
I connected the SPDIF cable from my soundcard to the optical input of the DAC then a 3.5mm cable to 6.3mm cable from the dac to amp but I'm not getting any audio. Am I doing it wrong or is the equipment not compatible? Thanks
I use a simple stereo headphone splitter when using earbuds or a powered splitter amp to drive larger cans.
You use this.
BEHRINGER MICROAMP HA400 https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_api_tfqWzbYRVCW5W
tell everyone to bring headphones and daisy chain a couple of these https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_cp_apa_bSlrzbD8YDS38
I would find a way to split the headphone jack that's built into the console, Esports groups I've worked with before used those headsets and one of these Behringer headphone amps for this. So out of headphone port, into headphone amp, out of headphone amp to up to 4 headsets.
This gets more complex and isn't REALLY possible with this mixer or without another mixer in addition. You would want a mixer with another Aux send and basically set up another mix minus that would include you and everything else the casters want to hear (themselves, game audio) and route that through an aux and then that aux out to the caster headphones. Alternatively you could get a second small mixer and take the headphone out of your larger mixer, put that into the small mixer, add your God headset into that small mixer and then out of that small mixer into the caster headphones. Be aware that if you care a lot for Stereo (hearing imaging or two different things in either ear) interconnects get a lot more complicated.
I'm sure there are a billion things out there, I learned nearly everything on the job or through my college degree so it's hard to call up any one resource that would cover all the basics. My first suggestion would be read the manual for whatever console you're interested in purchasing and google any terms that you aren't familiar with, generally basic analog console manuals are great at explaining functionality and industry terms. The Mackie 1604 was bog standard for many years as the cheap analog mixer so I'd say click on through that to get a core understanding.
> How would I set it up so that I can hear myself and the other person through the headphones?
You do this with what's called a "headphone amp" or "headphone distribution amp": https://www.amazon.com/dp/B000KIPT30
For the input, you can either get an adapter that merges the two analog mic outputs, or if you need volume control, a mini mixer like this: https://www.amazon.com/dp/B000KGYAYQ/
A headphone amp like the Behringer HA400 will do what you want.
https://www.amazon.com/Behringer-Ultra-Compact-4-Channel-Headphone-Amplifier/dp/B000KIPT30/
!
1: you're looking for a headphone amp with multiple outputs, like this or this if you want something larger. it'd be best if you could have your own mix for each instrument as not everyone wants to hear the same thing (which the larger HA8000 unit allows with the direct input), but on a budget the first one would be fine
What does the adapter look like? I'm not sure what civilian plane jacks mean - do you mean the ones you plug into on regular flights for the in-seat entertainment?
If you can get another adapter to a stereo 1/4" plug, at $25 this would be in your price range with change:
The stereo 1/4" plug would look like this (the one on top, the smaller one on the bottom is your regular headphone plug for scale): https://www.amazon.com/Hosa-CMS-110-Stereo-Interconnect-Cable/dp/B000068O36
If I'm understanding things correctly, and you indeed have either a line out or headphone out for each of your amps, you are going to need two items. The first will combine the line out and/or headphone out signals from your three amps and a second that will amplify that combined signal and split it into three sets of headphones.
The Behringer headphone amp you linked should take care of the 2nd part. For the first part you want a mixer of some sort.
Something like this should do the trick if you are OK running mono: https://www.amazon.com/gp/product/B000KGYAYQ/ref=pd_sim_267_3?ie=UTF8&psc=1&refRID=A4T8752HV38T9RZWFP7R
Or if running stereo: https://www.amazon.com/rolls-MX41B-Stereo-Channel-Mixer/dp/B0002D03AW/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1476837119&sr=1-1&keywords=rolls+mx41b
You will also want to be careful you get cables and/or adapters with the proper connectors (TS or TRS depending on mono or stereo).
It is possible that there is a single product out there that will combine a mixer and headphone amp/splitter but I don't recall ever seeing one.
> HA400
we must have this: http://www.amazon.com/Behringer-HA400-4-Channel-Headphone-Amplifier/dp/B000KIPT30/
but ours is steel/grey instead of black. Can we use these 2 together one feeding into the other?
Ow that's very very cool.
How many band members? Then by all means, get.. 3 or 4 Sennheiser HD598SE's.
I do have to say something, I am absolutely not an expert on this at all. It's the very first time I've got a request like this before. So I am also learning.
From what I've learned so far, it might not be as easy to simply plug in 3/4 headphones into this splitter that I've found and have awesome sound for all of you.
Because there might not be enough power. Or their might be some interference depending on how it all works.. I really am not sure on this at all.. The idea I currently have should work. Your audio will go like this.
PC ► (via USB cable) DAC ► (via RCA cable) AMP ► (via 6,3mm male to male cable) SPLITTER ► Headphones
I just am not entirely sure if this will work well. Audio is complicated.. I am absolutely not an expert.
I also found this device which seems to have an Amplifier build in it. So you don't have to use the AMP at all, then you have 2 options, skip the external DAC completely and go directly from your PC audio (3,5mm jack) to the splitter (6,5mm jack).This way you use the motherboard it's on-board DAC to create the audio. It get's amplified by the device and puts out the sound to the headphones.
PC ► AMP Splitter box ► Headphones
Or go from the PC to the external DAC and then go from the RCA connectors to the audio splitter. With this cable. Think that this is a bit cleaner in terms of audio..
PC ► DAC ► AMP Splitter box ► Headphones
Although I would probably try the first option above first, if that does not work sufficient, then try the the other 2 options. If that doesn't work..
Then you probably have to tell me and I will need to make a (non living) sacrifice to the audio gods.
^(which means that I have to ask head-fi what the hell we have to do!)
I think that all 3 options should work.. But I can't say for sure in all honesty.
PS. Yes I indeed drew a picture for you, no worry.. It's absolutely not a Picasso!
You're hopefully going to find it, if you read my whole rationale!
Looks like your specific interface does indeed restrict the headphones to output only the Line Out 1-2. So you'll need a headphone amplifier that will accept stereo balanced TRS line input, like a Samson Q5 or similar. You would then connect the 1/4" line outs 3-4 to this box, and then use this for your headphones.
You could probably get away with using a Behringer HA400 and connecting its input to your Line Out 3-4 using a TRS -> stereo TS y-cable. The only problem there is that the Behringer is expecting a headphone-level signal at its input, and your interface's line out 3-4 is much lower than a headphone signal. So you would have to crank the Behringer's volume up, increasing noise.
Don't judge me too hard haha I'm a college student on a strict budget but I was thinking of something along these lines. https://www.amazon.com/dp/B000KIPT30/ref=cm_sw_r_awd_j1sqwbX7ZPGME
Do you think these are sufficient?
Well I hate the idea of using batteries, do you think this thing would work? it's the cheapest wall-powered headphone amp I could find.
http://www.amazon.com/Behringer-HA400-BEHRINGER-MICROAMP/dp/B000KIPT30/
I originally asked this in /r/audiophile but I think it may be more relevant here since I am essentially asking about headphone amps.
I have a 3.5mm signal coming from my xbox's voice chat that I want to run through a super simple amplifier so that I can increase/decrease volume with a knob. It can't be a passive potentiometer because it needs a least a little gain.
Currently I am using one of these but it annoys me for a few reasons:
(1) No power button so I have to unplug it to turn it off
(2) There are three extra knobs/inputs that I'm not using
I was planning to replace it with a SMSL SA50 because it has a fairly simple look and a power button, but I'm a little put off that I'll have to get banana-->RCA connectors to hook it up to my speaker system. I'm generally not incredibly concerned about the audio quality of this particular component since it will be amplifying xbox voice chat which is just about the lowest of the low.
Any thoughts on a similar amp that might work in this scenario, or some way I can connect the SA-50 to my speaker system without using something as ghetto as this.
Thanks!
I have a 3.5mm signal coming from my xbox's voice chat that I want to run through a super simple amplifier so that I can increase/decrease volume with a knob. It can't be a passive potentiometer because it needs a least a little gain.
Currently I am using one of these but it annoys me for a few reasons:
(1) No power button so I have to unplug it to turn it off
(2) There are three extra knobs/inputs that I'm not using
I was planning to replace it with a SMSL SA50 because it has a fairly simple look and a power button, but I'm a little put off that I'll have to get banana-->RCA connectors to hook it up to my speaker system. I'm generally not incredibly concerned about the audio quality of this particular component since it will be amplifying xbox voice chat which is just about the lowest of the low.
Any thoughts on a similar amp that might work in this scenario, or some way I can connect the SA-50 to my speaker system without using something as ghetto as this.
Thanks!
I use a headphone amp to split my guitar signal out (and keep my realtone cable safely tucked away). I use a regular guitar cable from guitar to amp, then the outputs can go to the realtone cable, an amp, and a separate recording device. The amp has individual level controls so it's easy to get a nice signal to each output. I play rocksmith on a desktop and use a laptop (even an old obsolete one will work) to record the guitar signal (clean or after my pedals depending on what I'm doing.
More recently I got one of these which is pretty pricey but with all the inputs I can easily record stereo rocksmith input (usually with the guitar levels set to zero) and 2 guitar inputs (usually one clean and one with my effects) simultaneously. With multiple tracks I can just record songs without worrying about what I sound like because it's so easy to play with levels and post-effects after the recording is finished.
Most of the time I'm recording rocksmith with my guitar turned down and my clean signal, and then just apply effects afterward in garageband.
I got one of these?
But I don't see how it plugs into the RCA ports...or how else it would connect to the sound card?!
Question about cost effective headphone distribution
I am getting equipment together to record an improv comedy podcast. Participants will be doing voices, shouting, and generally getting overexcited. I think this means that everyone should wear headphones, so they can monitor themselves and correct their mic technique. What is the best way to split a headphone signal to 4-6 people? I am recording into a Zoom h6. I bought a basic 4 channel headphone amp. I have not been impressed with it so far. There is a persistent "hum" in the background (which strangely it disappears when I touch the device). I am connecting it with a cheap cable and adapter, see pic (http://imgur.com/GnoKurw,h8P0b0W#1).
Can I correct the hum, perhaps by buying more expensive cables? Or do I need to buy something more expensive?
I never really got any straight answers for this before, but I'd grateful if you could help.
I use this Behringer Microamp and I have a pair of ATH-M50x and the Sennheiser 558s.
Is my motherboard's built-in sound driver holding these headphones back any? I know some people recommend a sound card but I'm not sure. If you scroll down the motherboard's page, it says a few things about it's Purity Sound 2 and I'm not so good with the technical details there.
you can use a mixer, but you'll need what's called a headphone amplifier.
Here's a winner I have for $25
you put all your audio sources IN to the mixer, then OUT to the streaming PC. Where you can plug headphones into the mixer (for monitoring the sound of what the mixer hears) instead you run that cable to the IN of the headphone amp, and then OUT to your headphones, and your GFs. You can also mix your audio from each PC into the mixer, but you'd need a 4 channel mixer... sound from you and your GF, and mics for you and your gf.
Here's a beautiful pic: https://i.imgur.com/81uJfUt.png
thsi assumes you're using real mics, and not usb headsets... ymmv
You should be plugging your headphones into the PC audio out, not the microphone. Use 3.5mm aux splitter or even better a headphone amp to properly split the signals for your headphones.
The headphone amp is 1/4" and not 3.5mm (what your earbuds are) so you'd also need two 3.5mm to 1/4" adapters to work.
If you care about audio-quality, you should go to Headphone specialists or some "Audiophile" place.
I currently run mine through this (helps to split speakers aswell) and it does the job great. Granted you could spend more but it'll be a upgrade over your onboard.
Something a little more affordable. http://www.amazon.com/Behringer-HA400-4-Channel-Stereo-Headphone/dp/B000KIPT30/ref=pd_cp_MI_0
A more simple solution would be to run the output of the laptop into your desktop's line in and let your desktop mix them.
Now that you mentioned i tried turning it off and there is distortion/noise to some degree. Could it be that my PC's motherboard isn't compatible with this headset somehow? Pardon me if i sound dumb, but could it be my PC should be powering these way more than they are but in reality they only power as much as a laptop or phone would? Maybe i need a soundcard?
I just checked the instruction manual and it seemed to assume you were going to plug it into a headphone amplifier or mixer: https://imgur.com/rxZ5Gdo
Would this be good? https://www.amazon.co.uk/Behringer-HA400-Microamp-Headphone-Amplifier/dp/B000KIPT30/ref=sr_1_3?ie=UTF8&qid=1522942501&sr=8-3&keywords=headphone+amplifier
Edit: Drivers didn't change volume and i don't have any new options in the headphone settings