This product was mentioned in
with an average of
Coolermaster Vertical GPU mount and a ribbon cable. Amazon sells a combo. Cost about 35quid in the UK. Really easy mod =)
Here's a link Cooler Master MasterAccessory Vertical Graphics Card Holder Kit [link]
Edit: oh dam it's gone up by 11quid =(
I have the coolermaster one, it's ok does the job
Just be aware that if you have a PCIE 4.0 motherboard you have to set it manually in BIOS to PCIE 3.0 since the riser cable is only PCIE 3.0
Depending on your case. Minor modifications may have to be made. But this one was direct bolt in
Cooler Master Accessory: Fits MasterBox, MasterCase, Maker, H500P Series Vertical Display VGA Holder Kit w/ Riser Cable [link].
This comes with everything you need. You just need to cut the gpu brackets on the back of your case. Also, thank you
It is this model which you want to buy?
I purchased it off amazon a couple weeks ago:
Looks like it's out of stock currently but keep an eye on it, I was having similar issues with availability but just kept a look out and sure enough they restocked within a week or so.
I've found the coolermaster vertical gpu holder. I noticed that it isnt made for my S340 but I've come across someone who might have done it. Not 100% sure about this though. Do you think this might fit?
LOVE it. looks awesome and I think the effort really paid off.
my only question is, where did you buy the mount for the GPU? Not the PCI Extension cable, the part where it mounts the case.
edit: found it. but where did you buy it?
edit 2: oh, fuck me, it's on Amazon, now. a few months ago, you'd be luck if you got the notification from coolermaster before they sold out. I though I'd come back and leave the link incase someone else wanted it
Ryzen 5 2600x, MSI 1060 6gb, gskill 16gb @3200. Going to get a new desk when i move in to a new place in a year or so. Yes it's a s340 case, I used a cool master gpu mount kit I found on Amazon, just had to cut a few metal bars on the back of the case.
This is exactly what I bought.
This video is exactly what I did, only I have the regular s340.
I got it from amazon: [link]
But it says it’s currently unavailable :(
To add on to this, I got mines from Amazon for ~54 w/ tax and shipping.
The Cooler Master store, sells just the bracket for 20USD.
The Coolermaster one tends to come out on top of the reviews.
Whoops! My mistake. Amazon has those as well for $25-40.
Cooler master: Cooler Master Accessory: Fits MasterBox, MasterCase, Maker, H500P Series Vertical Display VGA Holder Kit w/ Riser Cable [link]
Kaislin: Kaislin Vertical Graphics Card Holder Bracket,GPU Mount ,Video Card Support Kit with Riser Cable [link]
SUPERPLUS (I actually prefer the aesthetic of this one the most, and it’s $26 shipped with Prime): PCI- E 3.0 16X Graphics Card Vertical Kickstand/Base Magnetic Standoff DIY ATX case (Black with Extension Cord) [link]
My guess is that you’re looking for one of the first two, for cheaper than retail. So good luck and I hope you find something!
you mean a vertical gpu mount?
> The whole point was to prevent GPU sag but I guess I could run some bends to keep the card propped up.
I'd get creative with some form of pillar or even do something with suspension like in Pi.
I'd do something novel with suspension from above.....but I've got a horizontal motherboard in the HAF XB case.
I've looked into such vertical GPU mounts before for the sake of something novel(gpu laying fan-side up in my case) and I keep coming to the same issue, awkward cabling / plugs.
The only way around it that I see would be to cut into the case to allow for this from Cooler Master or something like it for full access to the back of the card and to use normal cables.
Not sure if your case would need cutting, but most have bars or slats between/under the PCIE covers.
My coolermaster did come with a PCI-e Riser cable [link]
it'll be ordered separately, i believe something like this or this will be what you're looking for. cablemod makes em, as well. it's a bit of an added cost so you don't have to do it of course, but to get the maximum of your GPU aesthetics i think it's a neat idea.
I had to cut my s340 and install this Cooler Master Accessory: Fits MasterBox, MasterCase, Maker, H500P Series Vertical Display VGA Holder Kit w/ Riser Cable [link]
Cooler Master Accessory: Fits MasterBox, MasterCase, Maker, H500P Series Vertical Display VGA Holder Kit w/ Riser Cable [link]
I bought the one from cooler master: Cooler Master Accessory: Fits MasterBox, MasterCase, Maker, H500P Series Vertical Display VGA Holder Kit w/ Riser Cable [link]
This is the best one.
This and a dremel
They're called vertical gpu mounts
I watched a video where this one was used. I was going to buy one and it became unavailable. :(
Coolermaster Vertical GPU mount [link]
Phanteks evolv and I'm using a Coolermaster Vertical GPU mount [link]
Just to confirm your's is this right ? https://www.amazon.sg/Cooler-Master-Accessory-MasterBox-MasterCase/dp/B071P862G1/ref=asc_df_B071P862G1/?tag=googleshoppin-22&linkCode=df0&hvadid=389066266933&hvpos=1o1&hvnetw=g&hvrand=17669917896100251329&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9062499&hvtargid=pla-381000584578&psc=1