I’m indecisive and was worried about replacing any object I put stickers on in the future, so I bought magnetic sheets, stuck the stickers to them, and cut them out. Now they can go on any metal surface in my shop and I can move them as needed.
These are the sheets I used: Craftopia Magnetic Adhesive Sheets | 8" x 10" | https://www.amazon.com/dp/B071L97W57/
They have one sticky side so you can even leave the backing on the sticker so you can peel it and stick it in the future if you decide to put it somewhere permanently.
You can buy thin sheets of magnet and cut it to whatever size or shape you want. Now as far as affixing the photos I would try a few things and see what works best.
Edit: found an Amazon link if you like that sort of thing. I get bored at work some one should benefit.
https://www.amazon.com/dp/B071L97W57/ref=cm_sw_r_cp_apa_i_RJ26Ab031R35N
I just used these ones because they were the best deal when I bough them. I am in the US for reference. I know they make them in A4 as well but given how easy they are to cut to size I was not worried too much about what size I bought. I would think they are all pretty much the same across brands.
I dont have a YouTube channel, but since you're intrested, this is what i use to turn stickers and keychains into magnets,
Craftopia Magnetic Adhesive Sheets | 8" x 10" | Pack of 10 | Magnets for Crafts! - Flexible Peel and Stick Self Adhesive for Crafts Photos Stamp Dies and More (8"x10" 10 Pack) https://www.amazon.com/dp/B071L97W57/ref=cm_sw_r_cp_apan_glt_fabc_T17TTABYP9THGGD57S1E
Craftopia Magnetic Adhesive Sheets | 8" x 10" | Pack of 10 | Make Anything a Magnet! | Flexible Peel and Stick Self Adhesive for Crafts Photos Stamp Dies and More (8"x10" 10 Pack) https://www.amazon.com/dp/B071L97W57/ref=cm_sw_r_cp_apa_i_86dgBbSK1FPEE
This one worked well for me in the past.
yes i bought these on amazon and cut them to size and managed to get 2 out of every sheet and they hold up nicely with no problem https://www.amazon.com/Craftopia-Magnetic-Adhesive-Anything-Flexible/dp/B071L97W57/ref=sr_1_18?dchild=1&keywords=magnetic+tape+sheets&qid=1590673646&sr=8-18
i think i got these
helps if you have a an xacto knife too
Craftopia Magnetic Adhesive Sheets | 8" x 10" | Pack of 10 | Make Anything a Magnet! | Flexible Peel and Stick Self Adhesive for Crafts Photos Stamp Dies and More (8"x10" 10 Pack) https://www.amazon.com/dp/B071L97W57/ref=cm_sw_r_cp_apa_i_86dgBbSK1FPEE
Awesome bag collection. I've been turning my bags into refrigerator magnets and covering the fridge. Looks pretty cool. Just get some of this: https://www.amazon.com/Craftopia-Magnetic-Adhesive-Anything-Flexible/dp/B071L97W57/ref=sr_1_2?ie=UTF8&qid=1520867044&sr=8-2&keywords=magnetic+sticky+sheets and cut to whatever shape you want.
As for blade, I used the deep cut blade since i used the .6mm magnets. And Avery self laminating sheets. I set pressure to 240 and 2 passes. It was all trial and error until i got it right. The magnets and laminating I got from Amazon.
magnets: https://www.amazon.com/gp/product/B071L97W57/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
laminate: Avery 73601 brand.
cricut deep cut blade: https://www.amazon.com/gp/product/B00I00RASM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
​
hope that helps.
Magnet plastic storage containers. Get one about this big from your local hardware store.
Then either grab a metal sheet from that same hardware store or some magnetic paper from amazon.
Use the adhesive of choice (I used velcro tabs) to attach the sheet to the bottom of the container. Then glue magnets (I find 3mm thick fits neatly under GW bases) to the undersides of your bases (like 100 for $12), and you're good to go. Stackable, see through, keeps dust out, sealable, and easy/safe to transport. Also doesn't rub paint off like foam cases.
Heres anew link to more recent pic that shows some of the treehouse ones including C47
well theres three types of labels, printed cans( cant do anything with )
Wraps ( plastic that has a seam) you can cut these but you have to cut the seam and then snip the top and bottom ring area then it will flatten.
Adhesive labels. ( these work best)
I try to use the edge of an xacto knife or even a fingernail on a part of the label that i know ill maybe trim a hair off of anyway , so that it hides any crinkling.
there are a few companies that its just impossible to get the labels off of, some bottles like Founders, or cans like aslin, dont work well , usually bigger bottles work good though. Prairie works great. I recommend these magnet sheets, https://www.amazon.com/Craftopia-Magnetic-Adhesive-Anything-Flexible/dp/B071L97W57/ref=sr_1_3?ie=UTF8&qid=1525196048&sr=8-3&keywords=magnet+sheets
and i use xacto knives and a craft mat like this one, https://www.amazon.com/Alvin-Professional-Self-Healing-Cutting-GBM1218/dp/B0015AOIYI/ref=sr_1_4?s=arts-crafts&ie=UTF8&qid=1525196109&sr=1-4&keywords=craft%2Bcutting%2Bmat&dpID=51gR%252BOrM3WL&preST=_SX300_QL70_&dpSrc=sr...
so you dont cut through it to the table your on etc, the key to making your cuts nice and clean is putting a good amount of pressure during your cut and cutting fairly slowly.