What is Reddit's opinion of CyberPower PDU30BHVT8R Basic PDU, 208-230V/30A (Derated to 24A), 8 Outlets, 10ft Power Cord, 1U Rackmount?

From 3.5 billion Reddit comments

He told me just cut it off and put the correct one on 10 min job.

The one you posted is 120v.....so no.

https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=sr_1_fkmr1_1?s=electronics&ie=UTF8&qid=1512008177&sr=1-1-fkmr1&keywords=cyberpower+pdu+30a+20+outlets+240v

Also you will need to buy C14-c13 pwoer cords to plug ths s9s into the pdu.

oooo smart person! Will this

PDU be sufficient to run 3 antminer s9's?

Here is the post for archival purposes:

Author: ThaiKarma

Content:

>Im trying to buy this one but i can't find it in stock anywhere, unless it jacked up prices.

>I want to run only three 9s' can only recomend a subsitute?

Here is the post for archival purposes:

Author: ThaiKarma

Content:

> This one

What I would recommend is doing a 30 amp breaker L6-30R receptacle. Then get a 30 amp PDU to plug the units into. Something like this is good for starters. https://www.amazon.com/dp/B003KBIEGS/ref=cm_sw_r_cp_apa_glt_fabc_THBVSJYM37M7X9FQ0NBQ?_encoding=UTF8&psc=1 You can also get them metered to show amp draw for some money.

Your cables should be https://www.amazon.com/dp/B0011XA1M2/ref=cm_sw_r_cp_apa_glt_fabc_M4SYDCFBSREQ21PAFPB1?_encoding=UTF8&psc=1

But you will want to double check and make sure. I don't own any of these directly but I'm familiar with lots of bitmain products

The proper way is a pdu. https://smile.amazon.com/dp/B003KBIEGS/ref=cm_sw_r_cp_apa_glt_fabc_RDGC5YMBZHGSWBXHVFPR

You'll probably need to swap the home's receptical or the pdu's plug. It's a twist lock vs the normal dryer type, straight blade. Then you just need the c13 to c14 cables to the pdu.

Get a PDU or metered PDU on a dedicated breaker.

You can get either 120v or 240v PDU, but I would recommend getting 240v as almost all PSU allow both 120/240v usage. You many need to invest in C13 to C14 cables.

Example of 240v 30a pdu (240 x 30 = 7200 watts less 20% = 5760 usable watts).

https://www.amazon.com/CyberPower-PDU30BHVT8R-208-230V-Outlets-Rackmount/dp/B003KBIEGS/ref=sr_1_1?dchild=1&keywords=CyberPower+PDU30BHVT8R&qid=1611766181&sr=8-1

You'll need an outlet for the dedicated breaker that looks like one one below.

https://www.amazon.com/gp/product/B00002NAT9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

I have both 120v and 240v metered pdus.

https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=sr_1_fkmr1_1?s=electronics&ie=UTF8&qid=1512008177&sr=1-1-fkmr1&keywords=cyberpower+pdu+30a+20+outlets+240v

https://www.amazon.com/NETGEAR-16-Port-Gigabit-Ethernet-Desktop/dp/B01AX8XHRQ/ref=sr_1_3?ie=UTF8&qid=1511358750&sr=8-3&keywords=16+port+switch

Still not sure about the power cord from the APW++ to the PDU C14-c13 APW++ if you cant read in the photo, sorry.

I will be running 3 s9's off each 240v cicuit