I personally don't own one, but this $50 tabletop unit has been spoken of highly around here. Apparently the opening is a little bit large for the Dyna, but it works well enough if you hold your device in place while it's heating, and is fairly simple to get an adapter to allow you to heat hands off. So, neiterh as fancy nor as pretty as the purpose built jobbies, but hey, it's also a quarter of the price.
People often recommend this plug in induction heater on Amazon. You could also build your own portable induction heater for ~$75 . If you would like to purchase a battery powered induction heater, the Ispire wand and the VHB carbon are consensus picks at their respective price points.
Other people suggest alcohol burners but I am too clumsy to have any experience there.
For that price you're looking at something like this. Never used one. But seen people on here who have with success. 'Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_apan_glt_i_BD8ZHCZT232BTBVN2H37
I'm not an aficionado but this is what I got: https://smile.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_apan_glt_fabc_T6XXR83TKGTNY7F7YHK4?_encoding=UTF8&psc=1
Then you can hit up Ddave Mod for the adapter. You don't really need it but it will make it more convenient. Futo smoke might sell adapters also.
I also got it on amazon it works pretty well! I get 3-4 cycles on each bowl and it’s a lot easier than a torch or lighter. I guess it’s originally a dental tool of some sort, not really sure what for. DDave makes an adapter mod for $20 on his website or you can make your own like i did, i just used a few of the rubber caps from glass oil slick containers and cut a hole through them. they ended up being perfect diameter to fit inside he heater
This is an example
> https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_apa_glt_fabc_4EQCKMP3DS2HJRHNZFNW
That's the one. I thought I'd stumbled upon something new and magical, then read all the comments.
I didn't do anything but remove the silicon insert it comes with, add a bit of cork to the very back so the plastic doesn't burn, then add the cork body in. No physical or internal mods to the unit itself.
https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_apa_glt_fabc_4EQCKMP3DS2HJRHNZFNW
I'm surprised. I searched "induction heater dynavap" and this one popped up with a bunch of others. Most are right around $50, but it needs work to function properly.
I do take it and put it back to get two heating cycles with this cheap guy -
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_glt_i_A7W73PQM096RF7ZP63TZ?_encoding=UTF8&psc=1
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_glt_fabc_3PWHTAR7CX5Y5045QAHA?_encoding=UTF8&psc=1
Get the Induction Heater Hands Free Mod from DDaveMods.com. You’ll notice multiple people mention this mod in the comments on Amazon.
Happy vaping!
Koil Boi for $80 on 4/20... That's the best price short of making it yourself, or the dentist's tool heating device on Amazon for $52
I built one. It broke, I fixed it. It's good, but it takes 5-6 times to roast my herb as opposed to 3 with my torch. I find myself choosing the torch most often.
I don't have the dynamesh but I bet it'd work well with DMT. As far as the heater goes here is the link my first unit was DOA but this one has withstood daily use for the last 6 months or so and still works great. I'm considering upgrading to a portable heater so I can take tmy DMT on the go.
Got mine over the summer and love it. If you haven't gotten an induction heater for it yet, its a complete game changer assuming you are able to vape inside. I use this one and haven't had any issues. https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO/ref=mp_s_a_1_10?dchild=1&keywords=induction+heater&qid=1608476844&sprefix=induc&sr=8-10
If you’re either married or never want to get laid again grab the piece of shit thing on amazon. It’s the best thing on the cheap. I’ve been using multiple times a day since July. No problems once you get used to it. I got that and the ddave mod (glass insert) that you need.
If your wife is upset at your habit because you keep buying bongs and rigs and stems and bodies and whips, buying this allowed me to continue having.
So if you’re ok with having to pull this ugly as sin pencil sharpener out in front of your lady friend, go for it.
50 bucks.
https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO
This one looks to be very similar for about half the price on Amazon. I have heard they work well but I have never used one, just wanted to provide you with a cheaper alternative to what you posted. https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO/ref=mp_s_a_1_11?ie=UTF8&qid=1547768645&sr=8-11&pi=AC_SX236_SY340_FMwebp_QL65&keywords=induction+heater&dpPl=1&dpID=41wEeVXbn-L&ref=plSrch
Whew.
I understand your concerns with a torch - though the too hot vapor thing isn't really something that happens. But, you mentioned joint problems, the thing with the Dynavaps is that almost all heat sources will require you to spin it to get even heating and not combust, and a torch is the fastest way to do that.
So. Dynavap, it's a great vape, but in a nutshell, without a good heating source you're gonna have a bad time. There are options, though in my experience matches, candles, Zippos, etc just make it extremely frustrating, it takes so long to heat up. And you'll be spinning forever!
You can (and should) save a ton of $$ and buy one of these - https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO
With that induction heater (which I have and use regularly) you don't have to spin, you don't have to push hard, you just set the Dynavap in the hole, Hold it there, and it heats up - when it clicks it's ready.
Good luck homie. Hope that helps!
Not at all. My favorite IH and my daily driver for the last year was $47 to my door on Amazon prime!
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_i_vaGXEb81Z7B5W
Butane is going to be messy, and if you are constantly spraying butane it sounds like you need to purge your lighter. I'd say out of every 10 refills only 1 or 2 actually spurts up and its because I haven't been taking care of the lighter/not pressing the nozzle directly down into the fill valve. Also you could be overfilling, it moves quick. You have a can of compressed gas and your trying to squeeze it all into a hole thats small enough to seal itself. Don't know about removable tanks, but I just ordered the 50$ Induction heater off amazon .
It's hit or miss, but if you're not willing to build you're own, I think it's worth a shot and with a DDave mod you can make it hands free.
My daily driver for the last year. I prefer it to any of my other IH’s and Amazon can have it at your door in a couple days for $50.
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_i_eu3HEbEK4735J
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_i_HbnfEbPE1SDT4
I believe this is it. Again, I don’t have any experience with this but you can read the comments from other dynavap users on amazon. One person suggested getting a Ddave mod for it to help keep it snug
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_apa_i_1PZsCbP8RZWFB
Currently on the waitlist for a Flux deluxe IH, so I wanted to just get an IH quickly in the meantime.
Will any generic 10 mm to 14 mm adapter work? I did a bit more research and decided not to build one myself, but to order this. I hope it works.
I have this model it works really great. I would recommend getting the hands free mod from Ddave as well so you don't have to hold onto anything.
DynaVap will have a sale on 4/20. You can get medical IH on amazon for like $50 Here
For cheap options theres a 75 unit on etsy if you search dyna induction heater, and vhb has a 99 dollar unit, both desktop units. And just today this was posted on r/dynavap, a $53 induction heater from china, shipping I'd wager is a bit. Lastly you can get a hobbyist wax carving induction heater on amazon, the reviews are filled with people using it for their dynavaps haha
https://www.reddit.com/r/Dynavap/comments/nk1eoy/my_dynavap_setup_from_philippines/
I’ve seen people post about using this one found on Amazon.
It’s around $52 after shipping.
Yeah man, it's here on amazon: https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO
for 50 bucks you can't go wrong.
'Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_i_VJGN7WJ87XEJDAYNC54S?_encoding=UTF8&psc=1
Build your own or Dental composite heater.
https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO
Okay cause I was looking at this one here to save money
'Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_glt_fabc_P6K5HRADMHATA7PDG3WQ
Will this work
Item | Current | Lowest | Reviews |
---|---|---|---|
'Dental Power Dental Lab Infrared Electronic Sens… | $59.90 | $59.90 | 3.9/5.0 |
^Item Info | Bot Info | Trigger
Someone once suggested this? how about it?
https://www.amazon.com/dp/B0114AD8TO/ref=cm\_sw\_r\_cp\_api\_glt\_fabc\_JMSZFWYMEXAAD7X14262
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_glt_fabc_JMSZFWYMEXAAD7X14262
Item | Current | Lowest | Reviews |
---|---|---|---|
Dental Power Dental Lab Infrared Electronic Senso… | $59.90 | $59.90 | 3.9/5.0 |
^Item Info | Bot Info | Trigger
I have a Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater from amaazons and the wand by ispire.
Both required mods. This one from Ddave for the dental ih and this one for the wand.
Ya pa le wand sur amazon et celui a 60 quils avait nest plus dispo au canada mais srm revenir dans pas long tu peut tjrs le get au usa
https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO
Si tu veux le wand voila les sites au canada
Si test bricoleur check un tutorial pi pour 40-50 tu peut te faire le tien avec ca
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater:
https://www.amazon.com/gp/product/B0114AD8TO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Ddave Mod:
https://www.ddavemods.com/store/p73/The_IH_%28Induction_Heater%29_Hands-Free_Mod.html
This thing? Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_glt_fabc_MGGAFK7HWFQP7T0AGKTM
I have this one. Not pretty, but effective & inexpensive. Wishing you a speedy recovery, bud..!
Unfortunately being the broke fool I am, I had to go wall powered and grabbed an sjk induction heater on Amazon for maybe $55? I grabbed a ddave hands free mod. Or does the same thing but cheaper than a good looking one. I also love the auto shut off and having reinsert it a second time for the click. When I get sidetracked I’m not worried about burning down the house or something.
Amazon can have this induction heater to you in 48 hours. There are some reviews, seems to work pretty well.
Hey dude , a bit late to the party but check this thing out https://www.amazon.ca/gp/product/B0114AD8TO/ , actually works pretty well for pretty much the same cost as buying the components separately minus the assembly.
Many (me included) have found this model acceptable (it's not portable, and you need to grab an adapter from DDave):
https://www.ddavemods.com/store/p73/The_IH_%28Induction_Heater%29_Hands-Free_Mod.html
I think you're talking about this one, which is available in Canada https://www.amazon.ca/-/fr/Dental-Power-Lab-infrarouge-%C3%A9lectronique/dp/B0114AD8TO/ref=mp_s_a_1_14?dchild=1&keywords=induction+heater+dental&qid=1613071367&sr=8-14
this works for me get ddave mod and you’re good ddave
I have a chinese induction heater meant for heating wax carving tools that was very inexpensive on Amazon. Works just fine.
https://www.amazon.com/Dental-Power-Infrared-Electronic-Induction/dp/B0114AD8TO/
Which one is it if i could ask, come across a few different ones. https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_apa_fabc_Gd07FbQJE0K73 seems to be the common one i have found but cheapest
They have this one at Amazon. Works great, not sure if that works for you.
This is it and it works great.
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_i_OnKpFbVT0PDNN
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater
https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_tai_WEamFb6B6AF1W
FC member: Pipes (Canada) generally has his small desktop (AC plug-in) unit THE CALDRON "in stock"
Pipes "Poertside Mini" (battery) and "Caldron" (AC) I.H.
​
Also, the inexpensive SJK Dental Heater, while butt ugly, does work well (for me and many others). You can find it on Amazon for quicker delivery, or on eBay and Aliexpress for a bit less, but with a longer wait. Here is one link on Amazon,but other sellers might be quicker, or cheaper:
(tldr @ bottom) This $51 amazon heater (not designed for dynavap but well reviewed for it) + this $15 DDAVE Mod for it = Probably the cheapest way you can buy a complete IH (Induction heater). If you’re looking for the cheapest solution diy is probably the way, check out this post. If you just want a nice induction heater, there’s the Mag Heater, Fluxer Heaters, or if you just wanna spend all your birthday money dynavap sells an IH HOWEVER you can only purchase it in a huge bundle rn as the individual ones are out of stock (lame as fuck) so it’s a whopping $240. Of course, you get a bunch of other cool shit too, but if you just want an IH, def not the way to go. They all perform the same function, really just different box designs / materials / colors and whether it’s a portable unit or a wall unit only, which is all up to your personal preference. If any of these links are fuckd my b new to reddit.
tldr: Cheap: Heater + DDAVE Mod
DIY: This Guide
That Nice shit: Mag Heaters, Fluxer Heaters
That Stupid Expensive But Satisfyingly On Brand Shit That Includes A 2020 M Starter Kit: Dynavap Induction Heater Mega Bundle
This induction heater has a mod from someone that holds the vapcap in there and heats it. If you don't want to buy the mod, you can just hold the vapcap in there and it'll heat it just fine. I think the Amazon reviews even mention dynavap
Howdy! I’ve made two IH’s. A desk unit and a portable unit that uses 18650’s. While I like both of them, I still prefer using my $49 SJK IH. It’s the most user friendly being completely hands and button free, and it give me the best vape control out of all my IH’s. If you’re looking for budget, it doesn’t get much cheaper.
Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_api_i_ognYDbX2E0D9Z
DDaves mod for it is a wonderful quality of life mod if you find this IH suits your needs.
https://www.ddavemods.com/store/p73/The_IH_%28Induction_Heater%29_Hands-Free_Mod.html
Link for the heater looks like the price went up to 54
And the link to make it hands free https://www.ddavemods.com/store/p73/The_IH_%28Induction_Heater%29_Hands-Free_Mod.html
I saw someone post about using this induction heater for wax sculpting tools. I have no idea if it would be powerful enough, but I would really like to know. https://www.amazon.com/dp/B0114AD8TO/ref=cm_sw_r_cp_apa_LZQWAbHDY0FTT
So, probably the easiest way aside from the other comment suggestion of buying a specifically made IH, is to grab an SJK Technic China dental wax warmer from Amazon and a hands free induction heater mod piece from DDAVE. This should work very easily with no extra finangling required, or so I hear!