What is Reddit's opinion of
Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 34 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002?
From 3.5 billion Reddit comments
By popularity on Reddit, this product is:
62 reviews of this product found across Reddit:
The arm doesn't actually support the 49 inch 33lbs monitor, it hangs facing down but I put two screws in to prevent it of doing that. An easy fix and cheap monitor arm for both the bottom and middle
The bracket it comes with doesn't actually hold it in place, it hangs down a little bit but the way it's built you can put 2 screws inside of it to prevent it hanging down. Hard to explain,, but you can find my Review with a picture of it
This is the stand I bought. The instructions are not written very well, but it comes with a tempered glass bottom (black) that acts as the counterbalance. When I first got it I was worried about it's stability, but it's been really stable for me. Even when raising and lowering the desk, I don't really see it move.
I’ve had zero issues but apparently neck pain can be an issue LOL. (Thanks to all for looking out) I play on controller and mainly use the bottom screen for gaming. It’s 1440 at 165hz. The top is for movies when I lie back fully in the chair. It’s 4K at 60hzdual monitor stand
The monitor arm is more of a stand that I got off amazon, and so far it's great. Fits together well, and can support up to 40# per mounting point. You can use this link if you're interested.
Do you have another monitor next to it? I couldn't do that haha already had to turn my head with the 32:9 alone when I had a small crappy desk.
The hard part is mounting them, depending on how much you're willing to spend. I'll be honest, this isn't a recommended setup for this particular mount/stand, but I saw other people pull it off and decided to try it and it's pretty solid. The drawback is that I'd like to tilt the ultrawide up a tiny bit, but it'd be like moving a skyscraper an inch. Though you'd may still have that issue with any mount <$500
Hi it’s been a while. A little update, I took your comment into consideration about the desk size and was slightly hesitant on getting two of those mounts.
I decided to go with the same brand but a vertical mount. I don’t think I want to strain my neck out and looking further left to view the screen anymore tbh lol.
Here you are friend: Limited-time deal: Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 34 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002 https://www.amazon.com/dp/B082845XM8/ref=cm_sw_r_cp_api_i_dl_62TNGG7G6V6QBYH63NKY?_encoding=UTF8&psc=1
It’s super heavy duty, and sturdier than any stand I’ve ever owned.
Here you go, sir! Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 34 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002 https://www.amazon.com/dp/B082845XM8/ref=cm_sw_r_apan_i_858NJVS41KYW264YQ6VD?_encoding=UTF8&psc=1
I have the same setup as you except the top monitor is 24". This is the monitor stand that I'm using. It does have a base but it's at least flat so it doesn't really feel like it's taking up much space. Would recommend it, doesn't sag or anything for me.
Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 34 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002 https://www.amazon.ca/dp/B082845XM8/ref=cm_sw_r_cp_apan_glt_i_69P3V4G2ZXYKWXSRX1MN?_encoding=UTF8&psc=1
This: Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 34 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002 https://www.amazon.ca/dp/B082845XM8/ref=cm_sw_r_cp_apan_glt_i_69P3V4G2ZXYKWXSRX1MN?_encoding=UTF8&psc=1
I have the g9 and a 34''' ultra wide on top set up on this. The g9 is heavy (as you know) so the screw that locks the monitor tilt needs to be tightened by Hercules himself.. Just a fyi. Might be a good idea to secure the base to your desk if it's in a traffic area.
Interesting. For a setup like that, maybe three of these or something like them may do the trick. Can't say for sure if the monitors will be flush like that, but if you get a stand with arms you probably could adjust them.
I got it on Amazon, I really like it and for the price its really stable and I didn't have to modify my desk at all. It slid right under the riser just perfect!
> Vertically works better (I could theoretically stack a pair of regular wide screens) but this is one of those “I didn’t realize that solves a problem I had until I saw it” things.
If you just want to stack monitors, you're probably better off going with a mount to stack multiple cheap ~16:9 monitors. The combined mount+monitors would probably be cheaper than one of these 16:18 monitors (at least initially).
It’s not the cleanest set up- but at the moment I have the 34 inch Alienware on this Amazon freestanding mount because it’s tall enough to have the g9 on its own base under the Alienware. Not the best set up but it works until I figure out a more fluid one
hey there, it's linked here. Great vertical dual ultrawide/regular monitor stand for ultrawides up to 35". Saw an Amazonian that successfully mounted a G9 with another 34 inch UW above it too.
It’s this one:
It was about 35 bucks when I bought it nearly 8 ish months ago.
No. Hard, hard no.
I actually have a valid use case for this for my job, where a res like this would really help me, and its just straight painful to look up and down.
Heres the stand I ordered if youre curious(To get vertical, you need to jerry rig the back to make it not spin back to horizontal):
https://smile.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I bought this one on amazon. It's 40ish bucks and honestly I've super happy with it. It's very easy to set up and feels like good quality. I have a 34" on bottom and 24" top. I did see a review where some had 27" on top as well.
I'll see if I post a picture of my set up on here.
Howdy dude. You could stack the second monitor above the first with a vertical stacking mount. I’ve done it with two of my monitors.
Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 32 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002 https://www.amazon.ca/dp/B082845XM8/ref=cm_sw_r_cp_api_i_PATH142WVJCF458MK1BX
Hope this helps
Howdy dude. You could stack the second monitor above the first with a vertical stacking mount. I’ve done it with two of my monitors.
Dual Monitor Stand - Vertical Stack Screen Free-Standing Monitor Riser Fits Two 13 to 32 Inch Screen with Swivel, Tilt, Height Adjustable, Holds One (1) Screen up to 44Lbs HT05B-002 https://www.amazon.ca/dp/B082845XM8/ref=cm_sw_r_cp_api_i_PATH142WVJCF458MK1BX
Hope this helps
I order the monitor stand and I have a C49RG9. I did have to use a clamp to feel more comfortable that it wouldn’t tip over and tighten the screws to keep the tilt but all in all I am happy with the buy. Will see after working with it for a few days.
https://www.amazon.com/Dual-Monitor-Stand-Free-Standing-Adjustable/dp/B082845XM8
49 inch odyssey G9 and 27” standard curved. This is the mount, but I had to Mickey Mouse the shit out of it and clamp it to the desk so it wouldn’t fall forward. Only mount I could find that supposedly supports the weight of the odyssey, but it seems that it wasn’t designed to hold a monitor of this particular shape.
This is the package I bought off amazon. It's cheap but it is very sturdy and easy to setup, I definitely recommend this!
Looks like this Dual Monitor Stand...
https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
...I'm using the same one for two 34" ultrawides (AW3418DW and AW3423DW).
Looks like this one...
https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
...I'm using the same one for the AW3423DW and AW3418DW.
If youre set on stacking them, I would recommend a pipe mount; simply because Arms like to sag.
Dual Monitor Stand - Vertical... https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share this one
This one! https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It gets amazing reviews too, lots of people have used it for ultra wide monitors too
This guy right here: https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It's a great mount, you can angle them left/right, different heights, etc. I love it!
I use this one...
https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
...inexpensive and it works perfectly for my setup... two 21:9 ultrawides...AW3418DW up top and the AW3423DW below it.
You may want one that gives more flexibility (with some kind of arm adjustment, the one I listed has fixed mounts in the pole) but that depends on what monitors you're using as well.
Both. Admittedly this isn't a recommended setup for it, but others pulled it off so I gave it a try and it works great. Very sturdy and no holes in the wall or clamps.
Yes, it is this -- https://www.amazon.com/dp/B082845XM8
I have done this with two separated stands/arms, both times for a g9 and a g5 34 on top
first time it was using this stand
https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
​
I had to clamp the base to my desk since it was leaning forward because of the g9, but the stand feels very sturdy and is actually comfortable, I even used this extension (https://www.amazon.com/gp/product/B082FMHW2Q/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) to move the monitor on top a little so it could be even with the g9.
I used that stand for a little over a year, no problems.
​
second time (and to this day) I'm using this monitor arm for the g9, it arm actually broke once, but I "fixed" it drilling it a couple of bolts and it feels very strong now, it's been working fine for a couple of months already
https://www.amazon.com/gp/product/B09KXCTYRG/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
and this stand for the g5 on top
https://www.amazon.com/gp/product/B01IWOCCOW/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
I just got this with a 32:9 like OP’s on bottom and 32” on top, holds the weight even better than expected.
I have had this stack for a while. Holds both my Aw3420DWs pretty well (they make a desk mounted one as well).
Dual Monitor Stand - Vertical... https://www.amazon.com/dp/B082845XM8
I want something like this https://www.amazon.com/dp/B082845XM8?ref_=cm_sw_r_cp_ud_dp_KV705ZXRRCZ33ZY63RW6 with the 24 inch monitor at the bottom and the 34 inch at the top. Could u specify a specific mount? I also want the height of each monitor to be adjustable.
Thanks! It's actually a dual monitor stand and fairly priced at that.
I use this...
https://www.amazon.com/dp/B082845XM8?psc=1&ref=ppx_yo2ov_dt_b_product_details
...and it works great for me. I have a 32 inch LG on the bottom and a Alienware AW3418DW Ultrawide on top. Solid build quality dual monitor stand.
I know not what you are asking, but I've been down this road with my CRG49 and another Samsung 27" monitor. I really hated it after I did it. To have the CRG49 at the best height, the 27" was just to thigh. I was always tilting my neck up.
Here is what I used:
https://www.amazon.com/Dual-Monitor-Stand-Free-Standing-Adjustable/dp/B082845XM8/ref=sr_1_3?keywords=Dual+Monitor+Stand+-+Vertical+Stack&qid=1647531846&sr=8-3
I'm back to just the CRG49.
I just got this one, it's holding two 34" ultrawides just fine.
I currently have this one with a g9 and a g5 34, supports 44lb per monitor, had to clamp it to my desk thought
https://www.amazon.com/gp/product/B082845XM8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
You could always go with a vertical setup and use something inexpensive like this to make it happen...
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| Dual Monitor Stand - Vertical Stack Screen Free-S… | $37.34 | $37.34 | 4.6/5.0 |
| ErGear 22-35” Premium Single Monitor Stand Moun… | $66.98 | $- | 4.5/5.0 |
^Item&nbsp;Info | Bot&nbsp;Info | Trigger
Stacking Monitor Mount
Dell 27" 144Hz 2ms
Bottom 32" Curved Dell 165Hz 1ms
Top 32" Curved Dell 165Hz 4ms
Desk Clamp Monitor Arm
Both of the monitor arms are fantastic. I like the glass base of the stacking one, and it's holding up the monitors like a champ. I also enjoy my curved dell monitors, both of which I got at sale prices at Best Buy. The 27" one is also good. I bought it for ~$170 on Amazon in 2018, but the price has gone up a ton.
Ordered two and one of these stands: https://www.amazon.com/gp/product/B082845XM8/ref=ox_sc_saved_image_4?smid=A1VGYYY1EQIBD2&psc=1
I currently use two of those stands and they are surprisingly solid for ~$40.
Thanks 👍 The big monitor is a ASUS TUF VG34VQL1B, the smaller one is a VIOTEK GNV29CB. The stand is: Dual monitor stand
Hello, I have the same monitor!
​
I'm using this stand in order to mount a 29" Ultrawide on top: https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share
​
Not sure if it's available in the UK, but hopefully it is!
​
And here is an example of the monitors stacked: https://www.reddit.com/r/battlestations/comments/p40pt7/decided\_to\_ditch\_my\_old\_glass\_desk\_and\_swap\_it/
Both the monitors are attached to a vertical monitor mount! Here's the link :
https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share
It's a single monitor mount.
Here's the link for it https://www.amazon.com/dp/B082845XM8/ref=cm_sw_r_cp_apa_glt_fabc_Y6V45CH7ZF04ARGQPA63
There are lots of ways, Saeion. You'll need a dual monitor mount. Here is an example.
Here's the mount!
https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share
This is the monitor mount I'm using!
https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share
The top monitor is 29" and bottom is 49"
Link to the monitor stand below. Took me a while to stumble upon this. https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share
i didn't actually notice he linked it underneath, haha https://www.amazon.com/dp/B082845XM8?ref=ppx_pop_mob_ap_share
Popular alternatives to Dual Monitor Stand - Vertic...
VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, Black, STAND-V002
Amazon Basics Single Monitor Stand, Lift Engine Arm Mount, Black
