I got this table stand that uses the mounting screws. It works amazingly well!
Echogear Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/ Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/ Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_glt_fabc_R144Y9CR67PEEZGPZ0FC?_encoding=UTF8&psc=1
You will need about 59" of clearance to be able to have tv fit with the legs right on it. I would do an even 60" just to give it space.
My table was not long enough but it is a fairly nice one and would cost more to replace it so I purchased these and they work really well.
https://www.amazon.com/gp/product/B07YN7VRK8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Not wide enough but I'll see what else they have. I purchased these and I think they may do the trick.
Now I might actually be able to find a stand I can buy.
I stg, this is the best possible thing you can buy. I use it for the exact same size tv. It's easy ASF to install and is sturdy ASF. Plus, I like their marketing team, they're pretty funnyl
https://www.amazon.com/dp/B07YN7VRK8?ref=ppx_pop_mob_ap_share
With the same TV and maybe same center, OP I would recommend this TV Stand that allows you to raise the bottom of the TV up then set the center onto the feet or in front of them to provide more stability and the right height to avoid blocking the TV at all.
Using this one currently.
ECHOGEAR Universal TV Legs - Height Adjustable Stand for TVs Up to 77" - Wobble-Free Replacement Base Works WIih Any TV Including Vizio, LG, Samsung & More - Flat Design Compatible With Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_glt_i_QJKC706GSYWN1VS5Q5T0?_encoding=UTF8&psc=1
Thanks
My TV stand is prescisely the same depth of 16.25" for the feet on a 75" X90J. I was thinking just to be safe about getting these feet to use instead.
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/ Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/ Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_apan_glt_i_RTQWC19897FAM80PYP2R?_encoding=UTF8&psc=1
Supposedly they will work but I will be getting the set from Amazon with their setup service. Do you happen to know if they will screw on those third party feet?
> I don’t see where there is ‘mental gymnastic’
> I could get the center channel above the TV by using a very tall floor stand for the center speaker, which would go on the floor
You don't? 😂😂😂 You're out of your mind.
> TV stands for a 77” often weigh at least 15 kg.
4kg. Kthxbyeeeeeeeeee.
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/ Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/ Soundbars https://smile.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_glt_i_F26QGPK3N88XVFEQNMM8
It's a relatively easy fix though.
I got this for $45 (which is ultimately nothing when we're talking the money these TV's cost lol)
https://www.amazon.com/gp/product/B07YN7VRK8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
It can be adjusted in height for up to 8 inches I think. Very sturdy.
I was debating between that style and the following. Ended up with this and can vouch for it. It seemed like a sturdier design imo and more affordable
https://www.amazon.com/gp/product/B07YN7VRK8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/ Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/ Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_glt_fabc_91GYT47X9D2WG3W2ZR43?_encoding=UTF8&psc=1
Been happy with this for my 75”
These adjustable Echogear stands I bought for my 75in Sony are really well built and sturdy. They also have a flat design built to accommodate soundbars. I tried a few different stands and these were by far the best and the simplest. Some other types of stands will leave your TV leaning forward but these are strong enough to hold my TV completely upright.
Echogear Universal Large TV Stand... https://www.amazon.com/dp/B07YN7VRK8?ref=ppx_pop_mob_ap_share
the existing feet come right out. just hold tight and pull. the third party feet are great. use the larger m6 and the washers. the screws that are in the vesa holes have to come out and have no use if you are using the feet. its a great set.
You can get different legs that bolt to the wall mount. That's what I ordered for the 75" xbr75x900h because I didn't want to buy a 5 foot wide TV stand. Still waiting for the TV... but I tried the legs on my 70" vizio m701d-a3 that died on me since I still have it just to see how sturdy they were. https://www.amazon.com/gp/product/B07YN7VRK8
Not sure how sturdy it will be since the xbr75x900h has 300mm wide vesa pattern vs the m701d-a3 which is 400mm wide. I don't have kids or dogs, so shouldn't be a huge issue.
That's going to fall, especially with cats. I'd recommend either mounting the TV, or check out this TV base. Really cost effective and you can put the Arc on it if necessary
https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_apa_fabc_CKI1FbMDDSRFQ
Keep your current TV and find a smaller console to put it on using these new legs.
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_i_hARGFbT72SD9N
If new legs are not acceptable, then mount your TV on the wall above your new console. Hope this helps! 😀
I got these as mine was not deep enough for the tv stands and these work great
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_i_sUmBFbH6Y6BMP
I use this. I originally got it because my entertainment center was too short for the length of the tv stand but you can raise up the tv to accommodate the soundbar.
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_i_J2GzFbGN20EZ6
ECHOGEAR Universal Large TV Stand - Height Adjustable Base for TVs Up to 77" - Wobble-Free Replacement Stand Works w/Any TV Including Vizio, TCL, Samsung & More - Flat Design Compatible w/Soundbars https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_i_2Z.kFbCD7H33T
So then find another pair that does 75”?
Echogear Universal Large TV Stand - https://www.amazon.com/dp/B07YN7VRK8
ECHOGEAR Universal Large TV Stand... https://www.amazon.com/dp/B07YN7VRK8?ref=ppx_pop_mob_ap_share
It should work, I used This with a C9 which is very similar.
I’ve used these before and I think they work well
https://www.amazon.com/Echogear-Universal-Stand-Wobble-Free-Replacement/dp/B07YN7VRK8
I have found these to be super sturdy (I have a 65" OLED TV on them) and they don't require require any mounting to furniture or holes in the walls. Whether my two Bengal girls have pushed or pulled the TV from the front or back, the TV has not moved at all. And if you still have any concerns after you have mounted the TV on them, could always rest one or both of the barbells you have on the floor over the the feet to guarantee no movement. https://www.amazon.com/Echogear-Universal-Stand-Wobble-Free-Replacement/dp/B07YN7VRK8?ref_=ast_sto_dp
Your best options for securing it are probably
1) Buying an over-fireplace TV mount like this which kills two birds by giving you both height adjustment and security,
2) Permanently securing it over the fireplace with a proper wall mount, or
3) Replacing those legs with L-shaped VESA tv stand legs AND a wall anchor...replacing those original TV legs with sturdier posts is most pressing, since if even one of the front feet slips out the whole thing is coming down (and would take the anchor/drywall with it)
Might I recommend using something simple like this: https://www.amazon.com/gp/product/B07YN7VRK8
That way you don't have to keep your drawer popped open all the time?
You could also buy a third party stand, something like this: https://www.amazon.com/Echogear-Universal-Stand-Wobble-Free-Replacement/dp/B07YN7VRK8/ref=zg_bs_14109851_6/144-9466105-6879055?pd_rd_i=B07YN7VRK8&psc=1
I’d use this to raise the tv.
This looks promising:
I was in a similar situation and my center was much too tall for the C1 77" but this 3rd party stand works great and allows me to adjust the TV just above the speaker.
Have you looked into purchasing another set of legs for your tv? My friend uses ECHOGEAR Universal Large TV Stand, it works for up to 77” tvs.
This is the stand but I modded it to connect to the stock leg mounts instead of the VESA mount to get it higher. ECHOGEAR Universal Large TV Stand... https://www.amazon.com/dp/B07YN7VRK8?ref=ppx_pop_mob_ap_share
This is the stand but I modded it to connect to the stock leg mounts instead of the VESA mount to get it higher. ECHOGEAR Universal Large TV Stand... https://www.amazon.com/dp/B07YN7VRK8?ref=ppx_pop_mob_ap_share
TV is X950G
This is the stand but I modded it to connect to the stock leg mounts instead of the VESA mount to get it higher. ECHOGEAR Universal Large TV Stand... https://www.amazon.com/dp/B07YN7VRK8?ref=ppx_pop_mob_ap_share
I had same problem coming from a80j 77 to x90j 75. Just get universtal tv stand. Im in the process of installing now.
make it easy and cheaper on yourself:
Cut sheet shows 16 1/4” so that definitely wouldn’t work with your cabinet. I would go with legs like this or a pedestal stand like this, with this one being 14.9 inches deep.
https://www.amazon.com/dp/B07YN7VRK8/ Personally I went with this stand. Its not too big and very stable. The 75" X900H is a 300x300 VESA as per Sony's specifications.
Yes you want your LR to be even from the wall. As much forward as you can get away with will be beneficial.
It doesn't look like the top of the stand is deep enough but maybe a TV stand similar to this would allow you enough clearance to get the RP-504C below the TV?
I understand about WAF. Could you maybe expand your options with a wireless adapter? I've been using mine for over a year and it's great
I got this one and it works great
https://www.amazon.com/gp/product/B07YN7VRK8/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
My old stand was too small so I got the EchoGear stand . Cost $40 versus a hundred plus for a new stand. They work beautifully for my 75 X900H
If the feet are too wide you can mount to something like this:
https://www.amazon.com/Echogear-Universal-Stand-Wobble-Free-Replacement/dp/B07YN7VRK8/ref=bmx_6/144-9375693-9221943?_encoding=UTF8&pd_rd_i=B07YN7VRK8&pd_rd_r=5121541d-11b7-4f3c-8963-4b8a3462507c&pd_rd_w=c0mc5&pd_rd_wg=r38gj&pf_rd_p=04f8298a-a324-416e-a108-788274fceb3a&pf_rd_r=0N939J09W6MVSXV0D53F&psc=1&refRID=0N939J09W6MVSXV0D53F
Great question, so it’s a horizontal Stand for 77” TV’s (needed it to be big since Id be putting my 43” TV’s vertically, if that makes sense).
Product linkaroo: ($40) https://www.amazon.com/dp/B07YN7VRK8/ref=cm_sw_r_cp_api_i_73OAFbKFNCPSQ