What is Reddit's opinion of
ErGear Dual Monitor Stand for 13 to 32 inch, Heavy Duty Fully Adjustable Monitor Stand for 2 Monitors, Dual Monitor Mount Fits up to 17.6 lbs per Arm, EGCM1?
From 3.5 billion Reddit comments
By popularity on Reddit, this product is:
26 reviews of this product found across Reddit:
This one here. I'm a bit annoyed I didn't buy it last month in advance, since it was on a flash Prime sale for $30 or so, but what can you do. Also could've spent more on arms with separate vertical articulation, but I'm perfectly fine with my two monitors being level horizontally.
You can get a dual monitor arm stand for desk saving.
Changed my life
Its a generic one. This is basically the same one https://www.amazon.nl/ErGear-Monitorstandaard-Constructie-Ergonomische-Verstelbare/dp/B082MLVXRR/ref=asc_df_B082MLVXRR/?tag=nlshogostdsp-21&linkCode=df0&hvadid=573426566610&hvpos=&hvnetw=g&hvrand=16505204662594454822&hvpone...
The desk can be positioned very close to the wall. You can probably see that in the pictures from the amazon link above.
Only downside of this mount is that its not super easy to adjust the height of the individual arms, although not super necessary. Also, there are other mounts with more elegant cable management solutions.
ErGear 17-32" Dual Monitor Stand... https://www.amazon.com/dp/B082MLVXRR?ref=ppx_pop_mob_ap_share This is the one I got, Idk if I'd recommend it tho, it does the job but I constantly have to adjust the monitors cause if I tighten them any more I won't be able to move them if I want to, so they just slowly tilt down
I bought this one for $35 about two years ago: ErGear Dual Monitor Stand Mount, Heavy-Duty Fully Adjustable Desk Clamp Arms for Computer Screens, Fits Most 17-32” Monitors up to 17.6lbs, Max 100x100 VESA, Swivel and Tilt, Black, EGCM1 https://smile.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_api_glt_i_GDFAY0R6EVE1PCVD3QY6?_encoding=UTF8&psc=1
Has held 2 27” monitors perfectly in that time.
ErGear Dual Monitor Stand Mount, Heavy-Duty Fully Adjustable Desk Clamp Arms for Computer Screens, Fits Most 17-32” Monitors up to 17.6lbs, Max 100x100 VESA, Swivel and Tilt, Black, EGCM1 https://www.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_api_glt_i_Z8T1GTBCYFB4HN2MK66T
Personally I would only go with one of the gas ones if you move your monitors up/down constantly or have a specific orientation need due to mismatched monitors.
I had a gas piston arm but switched over to arms like this. The single metal pole looks cleaner, and they do not interfere as much as the gas ones with how close your desk can be up against a wall.
Get a 2-arm monitor mount and place it a little bit off center, so that your main monitor is in front of you while your secondary one is too the side. Here is the one that I currently use and it has been amazing so far (also one of the cheapest ones possible) https://www.amazon.com/gp/product/B082MLVXRR/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
ErGear 17-32" Dual Monitor Stand Mount, Heavy-Duty Fully Adjustable Desk Clamp Arms for Computer Screens, Loads up to 17.6lbs per arm w/Swivel and Tilt, 75/100mm VESA, Black - EGCM1 https://www.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_api_glt_fabc_ZWPJ2MNEAYTKZ18Q41NH?_encoding=UTF8&psc=1
this one here, not the greatest but does the job well
Anyone knows if this is more flexible than this model? I got this for $20 and I'm debating if it's worth the hassle to return it and buy this one. The one I got is working fine but the $25 one seems more flexible in regulating the height of the monitors.
Ya it was lot for the 2 pack.
These types are solid: ErGear 17-32" Dual Monitor Stand Mount, Heavy-Duty Fully Adjustable Desk Clamp Arms for Computer Screens, Loads up to 17.6lbs per arm w/Swivel and Tilt, 75/100mm VESA, Black - EGCM1 https://www.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_api_glc_fabc_WU7.FbS9M3TJJ?_encoding=UTF8&psc=1
May have to dig more if you wanna go vertical stacked.
Limited-time deal: ErGear 17-32" Dual Monitor Stand Mount, Heavy-Duty Fully Adjustable Desk Clamp Arms for Computer Screens, Loads up to 17.6lbs per arm w/Swivel and Tilt, 75/100mm VESA, Black - EGCM1 https://www.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_api_glc_fabc_dlT3_NAm6FbQ6PQCS9
This was the best one I could find when I looked. It can fit both of the montiors, compatible with flat and curved, and you can side-clamp mount (drill free) and grommet mount (optional). https://www.amazon.ca/dp/B082MLVXRR/ref=cm_sw_r_sms_api_i_9WVVFbXV4R80A
If you want to upgrade your setup in any way, i highly recommend to get monitor arms.
Although you are pretty close to the wall, but i think you can angle it in a way that won't be a problem.
Benefits:
free up space on your desk
you can raise the monitors higher, so you can look at them strait on, better for your neck.
Here , about 5 inches from the wall.
When I went to 2 monitors I had the "main" monitored centered in front of me with the second monitor to my left. I know, not a great solution for you.
When I went to 3 monitors, I decided to get monitor arms. I still have the main in front of me, but a monitor to either side.
My suggestion is going to be a monitor arm...
https://www.amazon.com/Heavy-Duty-Adjustable-Computer-Monitors-EGCM1/dp/B082MLVXRR/
Would something like that work for the desk you're using?
Something like THIS would work and keep the monitors further back on your desk.
Here you go:
https://www.amazon.com/Heavy-Duty-Adjustable-Computer-Monitors-EGCM1/dp/B082MLVXRR/
Just need to strip out the extra fluff (ref=...) from their link.
new posts
Got it off amazon https://www.amazon.com/dp/B082MLVXRR?ref=ppx_pop_mob_ap_share
Using this one off amazon:
https://www.amazon.com/gp/product/B082MLVXRR/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Its inexpensive and does the job.
https://www.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_apa_fabc_sWVTFb04J2XK0?_encoding=UTF8&psc=1 if you're US based this one is $25 today and this is what I use with my 24" and 25".
> ErGear
Thanks! Could you link me to the ErGear one? The one I found looks quite different than yours - https://www.amazon.com/gp/product/B082MLVXRR/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
I used one from Amazon
The monitors are 27 inches but just to be safe I got one that can hold up to 32 inches
Popular alternatives to ErGear Dual Monitor Stand f...
VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, Black, STAND-V002
Amazon Basics Single Monitor Stand, Lift Engine Arm Mount, Black
