What is Reddit's opinion of ErGear Dual Monitor Mount Arm 13-32 Inch, Adjustable Gas Spring Monitor Desk Mount Stand, VESA Mount 75/100mm with C Clamp, Grommet Mounting for Most Flat Curved Monitors, Hold up to 26.5lbs?

From 3.5 billion Reddit comments

I got a similar product I found here maybe 2 weeks ago,

https://www.amazon.com/Monitor-Adjustable-Grommet-Mounting-Monitors/dp/B08BHJP422

And it works great. I imagine this would be good, if you need heavy duty. Else, it might be overkill. My monitors combined weight wasn’t even close to the maximum WITH the monitor stands still on

Possibly this but I could be wrong

Thank you! It's the ErGear Dual Monitor Arm from Amazon: https://www.amazon.com/gp/product/B08BHJP422/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

I'm only 5"5 so the eye level isn't an issue for me but if you're taller, I highly recommend to get two single monitor arm mounts.

Be prepared that unless you're putting your ultrawide (that's the bottom monitor, right?) Really close to the desk, you're not going to be able to see the bottom of your 27" monitor on top if it's behind the ultrawide.

I'm having the same issue now with my ErGear. This one.

I'm still looking for a pole that I can swap out so I can raise my monitors. The Vivo 39" is the PERFECT pole height for this, but I'm hesitating as I have no idea if it'll fit the ErGear arms. Will let you know if I decide to risk it all lol

How about This monitor arm for both?

I currently use it to stack my 34UW and 27(27 on top) if you mount the top monitor arm as high as possible it should fit but I would double check the specs it’ll be close. I have my 34” about 2” off the desk and if I fully extend the top monitor, about a 1” gap between monitors

I don't know about availability in Europe, but I use this. Been holding up fine. My monitors run close to 19 and 20 pounds and the space is a bit cramped so they are at weird angles but haven't moved or sagged from where I put them. Would have plenty of moment to stack perfectly vertical if I didn't have a space limit.

ErGear Dual Monitor Mount Arm... https://www.amazon.com/dp/B08BHJP422?ref=ppx_pop_mob_ap_share

Amazon

Thank you! It's tough enough to handle both and can still pan/tilt/lower/raise. However the arms aren't long enough to do side by side, only stacked config.

I've been using this one since June. I have a 49" under a 34" and it works great. No damage to the desk, unlike a previous double monitor mount I had.

You’re in luck. The same mount I use claims it holds a 34” but I would be a little skeptical tbh. It might be a close fit but it’s definitely a solid mount that I would recommend.

ErGear Dual Monitor Mount Arm 22-34 Inch, Adjustable Gas Spring Monitor Desk Mount Stand, VESA Mount 75/100mm with C Clamp, Grommet Mounting for Most Flat Curved Monitors, Hold up to 26.5lbs https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_api_glt_i_F0KY4XFQZM35VRNSKNM4?_encoding=UTF8&psc=1

I have the Ergear dual monitor arm which allows me to stack my 27 inch on top of my 34 inch. I personally like my monitors a little higher off the desk, so I opt to not go with the stacked route as the ultrawide really can't go more than 4 inches above the desk with that layout.

ErGear Dual Monitor Mount Arm 22-34 Inch, Adjustable Gas Spring Monitor Desk Mount Stand, VESA Mount 75/100mm with C Clamp, Grommet Mounting for Most Flat Curved Monitors, Hold up to 26.5lbs https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_apan_glt_fabc_TZA31043S7QQZS6WSGXS?_encoding=UTF8&psc=1

This fits

ErGear Dual Monitor Mount Arm 22-34 Inch, Adjustable Gas Spring Monitor Desk Mount Stand, VESA Mount 75/100mm with C Clamp, Grommet Mounting for Most Flat Curved Monitors, Hold up to 26.5lbs https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_api_glt_fabc_GZ8Q3H35BDKQ3W8B5GMX?_encoding=UTF8&psc=1

It’s the ErGear Dual Mount Arm for 22-34 inch, gas spring adjustable. It’s almost too short of a pipe and my bottom monitor has to be a little lower than I’d like but it works well enough

Found on Amazon: ErGear Dual Monitor Mount

I have a pair of these on my desk: https://www.amazon.com/dp/B08BHJP422?psc=1&ref=ppx_yo2_dt_b_product_details

They're not the simplest to set up, but they're cheap, pretty adjustable, and work well.

this is the mount

😏 good eyes.

got thearm off amazon

Just a regular gas spring dual arm from amazon! It was about 50-60 https://www.amazon.com/gp/product/B08BHJP422/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

2x LG 5k 27 inches on https://www.amazon.com/gp/product/B08BHJP422/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1

Appears unavailable at the moment.

ErGear Dual Monitor Mount Arm... https://www.amazon.com/dp/B08BHJP422?ref=ppx_pop_mob_ap_share

Same setup, this is what I went with - works great and allows you to still move the monitors if you ever wish to.

ErGear Dual Monitor Mount Arm https://www.amazon.com/dp/B08BHJP422?ref=ppx_pop_mob_ap_share

https://www.amazon.com/gp/product/B08BHJP422/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1

What do you think about this one ?
https://www.amazon.com/dp/B08BHJP422?ref=ppx\_pop\_mob\_ap\_share

This dual monitor arm

I used this one

awesome setup man. i think you would really benefit from a monitor arm! i bought one of these because of limited space and it was a game changer https://www.amazon.com/gp/product/B08BHJP422/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1

Main Monitor: Gigabyte M34WQ (34 inch 144hz)

Side Monitor: LG 27GN850-B (27 inch 144hz)

Monitor Arm: Ergear

Keyboard: GMMK TKL

Mouse: Logitech G604

Light above monitor: Quntis light bar

Standing Desk Frame: Topsky Dual Motor

Desktop: 74 inch Ikea Ekbacken Concrete

PC specs:

Ryzen 7 3700x
RTX 2070 SUPER
16GB RAM
1TB SSD

 

^Item Info | Bot Info | Trigger

ErGear dual monitor arm https://www.amazon.com/dp/B08BHJP422?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details

Thanks! I got it from Amazon: https://www.amazon.com/dp/B08BHJP422?psc=1&ref=ppx_yo2_dt_b_product_details

Thanks! Its this one

I use this one Monitor Stand and I really like it, definitely sturdy.

https://www.amazon.com/dp/B08BHJP422?psc=1&ref=ppx_pop_dt_b_product_details

This is the one I bought for my setup. Assuming that the Neo G9 has similar dimensions to the 2020 G9, it should work just fine. Additionally, it's a hydraulic arm so you can pull the 27 down in front of the G9 when you're 4king it up, without fear of scratching your ultrawide panel. I posted my setup here last night if you wanna take a look.

I'm using this mount with a ViewSonic XG2401 in portrait mode like this. I used to run 3 monitors before getting the 34" UW.

Having this setup compared to 3 separate monitors has simplified things . I can do PIP or PBP on the 34" with ease while still having the 24" for specific things that I always need open.

Since I'm still in the process renovating this room I'm considering to extend my L-Desk out by 1 side for more work space, either another CU34G2X stacked on top for other things, or maybe just setup a third to the right side like I already have on the left.

I'm always looking at other peoples setups to compare and see if what they have going on would make my life easy if I did a similar setup.

If you're wondering on the sort of things I am doing with the monitors. I have graphs always on for stocks/crypto trading, video/music editing, and of course gaming.

https://www.amazon.com/dp/B08BHJP422?ref=ppx_pop_mob_ap_share

It's actually just the stand that comes with the Astro A50's and the monitor stand is this:

https://www.amazon.com/gp/product/B08BHJP422/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1

Referral broke the link for me too. https://www.amazon.com/gp/product/B08BHJP422

https://www.amazon.com/gp/product/B08BHJP422/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1

Thanks and here you go!

https://www.amazon.com/gp/product/B08BHJP422/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1

There’s also this one for your consideration. ~25 bucks after tax.

https://www.amazon.com/Monitor-Adjustable-Grommet-Mounting-Monitors/dp/B08BHJP422

https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_api_glt_fabc_BC3XQCS5G1E7AK9E30FE?_encoding=UTF8&psc=1

This seems to hold more weight and I’m seeing a 60% off coupon making it 25 bucks after tax. Not as pretty to look at though.

https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_apa_glt_fabc_55SCD4SVF6RFB24JY7R4?_encoding=UTF8&psc=1

Is there any reason I should get the more expensive one?

https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_api_glt_fabc_FSBVMN5WS1GQJ7GQ6VN3?_encoding=UTF8&psc=1

https://www.amazon.com/dp/B0819PSPVS/ref=cm_sw_r_cp_api_glt_fabc_MKWJP6CTMHXKVN9X37T5

Using this mount

It’s this monitor mount:

https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_api_glt_fabc_ZKJ8SHD3D4BYEH1PJ50R?_encoding=UTF8&psc=1

And this stand:

https://www.amazon.com/dp/B000OOYECC/ref=cm_sw_r_cp_api_glt_fabc_KWPQFJZ8XQEWNYR5FPCG

Same. I got this but I find the bottom monitor ends up being too low.

https://www.amazon.com/gp/product/B08BHJP422/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

This is the one I used, its very versatile and worked really well for me

https://www.amazon.com/dp/B08BHJP422/ref=cm_sw_r_cp_api_glc_fabc_dlT1_WP5.FbPS6HFE4?_encoding=UTF8&psc=1

Another choice for your consideration. Can handle bigger and heavier screens.

A 3 in 1 monitor mount isn't going to give you the proper angles from your side monitors and will take away from the experience of triples. What you want is three separate mounts, something like this for the top and bottom center monitors and then a couple like this for the sides.