What is Reddit's opinion of Ergotech Single Freedom Arm, Includes Single Aluminum Articulating Arm, 8.4-17.8 lbs. Weight Capacity, Suitable for Monitors up to 27 inches, VESA Compatible 75×75, 100×100, Metal Gray (FDM-PC-G01)?

From 3.5 billion Reddit comments

You'll see size ratings on arms (UP TO 27"!) -- here's the thing: size doesn't matter... weight supported is key. Ergotech Single Freedom Arm $73 Amazon US works perfectly with AW34 -- monitor weighs 16.03lbs without legs.

I use the ergotech freedom arm. It's pretty pricey compared to others, but it offers some of the best articulation in the market.

I completely agree the PG348Q stand is atrocious lol. I went with the freedom arm off of amazon. It can easily move to where-ever you need it with ease.

https://www.amazon.com/Ergotech-Freedom-Arm-Metal-FDM-PC-G01/dp/B008TYF0F4/ref=sr_1_2?ie=UTF8&qid=1515605225&sr=8-2&keywords=freedom+arm

Hey man. It's an Ergotech Freedom Arm which is holding up this heavy screen just fine. Totally check it out!

The Freedom Arm by Ergotech is one I've seen mentioned a few times, apparently has a full extension of 26.7" - Link

I use a Ergotech Freedom Arm with my 34UM95. Same size profile and weight as your U3415W.

Works very well. Sturdy, clamps to the desk, and has great field of movement.

I swear by Ergotech Freedom and Freedom HD arms. I have a HD and holy crap, it has so much tension I have it all the way down and my 34" Asus ROG is still standing up more than I'd like it to.

Build quality is stellar, and way heavier duty than the $40-70 equivalent cheap gas springs I've used (Still using a cheap one and it sucks but its secondary)

Ergotech site

Amazon link for cheaper Ergotech Freedoms Freedom HD version

Note that the Freedom HD = "Heavy Duty", it was designed to hold up iMacs and AiO's (All in One's) so yeah it REALLY holds up.

Can't really justify anything else anymore, this thing is too nice. Desk clamp is really nice too. Plus I like its' extended arm length and I pull my monitor in and out by a difference of approx. 2 ft too because I vary from standing up at my desk to leaning back (reclined) and pulling it towards me.

EDIT Here is a video demo of it

I have an Ergotech Single Freedom Arm
https://www.amazon.com/gp/product/B008TYF0F4/ref=ppx_yo_dt_b_search_asin_title

It has enough strength to hold the monitor no problem. However, key presses or slight movements of the table can make the monitor vibrate / bounce a little. Anyone care to say how the Ergotron LX fares in this regard?

This is the one I have for my 34" Works great and have a nice range of motion. Supports the weight very well since the monitor is heavy

Ergotech Freedom Arm, Single... https://www.amazon.com/dp/B008TYF0F4?ref=ppx_pop_mob_ap_share

Monitor arm?

Ergotech Freedom Arm

https://www.amazon.com/gp/product/B008TYF0F4

>Ergotech Freedom Arm
>
>https://www.amazon.com/gp/product/B008TYF0F4

Ergotech Freedom Arm

https://www.amazon.com/gp/product/B008TYF0F4

Wallpaper should be this one: https://hdqwalls.com/wallpaper/2560x1440/beautiful-greenery-8k

To clarify, you're asking about the full range of motion on the Ergotech Freedom Arm?

This one -> https://www.amazon.com/gp/product/B008TYF0F4

https://www.amazon.sg/Ergotech-Freedom-Arm-Metal-FDM-PC-G01/dp/B008TYF0F4

Here you go

It is indeed the AW3418DW and the mount supporting it is the Ergotech Freedom Arm https://www.amazon.sg/Ergotech-Freedom-Arm-Metal-FDM-PC-G01/dp/B008TYF0F4

The arm supporting the secondary monitor on the left is just the Amazon Basics arm.

Ergotech Single Freedom Arm, Includes Single Aluminum Articulating Arm, 8.4-17.8 lbs. Weight Capacity -- don't get caught up on the "up to 27 inches" part... it is based on weight.

This arm is rated up to 17.8 lbs and your monitor without the stand is 14.6 lbs -- https://www.sceptre.com/Monitors/Curve-Monitor/C355W-3440UN-35-Curved-Monitor-product1176category12category80.html

Hardware Canucks did a video review a few years ago... (Best Monitor Arm?) Ergotech Freedom Monitor Arm Review -- worth the 6 minutes to watch :p

No special tools needed -- screwdriver, mostly -- arm should come with screws, spacers, and maybe special wrench for adjusting tension.

A similar arm is the Ergotech Single Freedom Arm. It’s got a different base and different color, though.

https://www.amazon.com/dp/B008TYF0F4/

It might be the Ergotech Single Freedom Arm

https://www.amazon.com/dp/B008TYF0F4/

I can recommend this Ergotech arm, cheaper than the Amazon one and really reliable.

​

https://www.amazon.com/Ergotech-Freedom-Aluminum-Monitor-Weighing/dp/B008TYF0F4/ref=sr_1_3?ie=UTF8&qid=1543688067&sr=8-3&keywords=ergotech%2Bfreedom%2Bmonitor%2Barm&th=1

Thanks! :)

Ergotech Freedom Arm

They are the Ergotech Freedom series in metal gray. I bought them on Amazon: https://www.amazon.com/dp/B008TYF0F4/ref=cm_sw_r_cp_apa_nnbxzbZNZ139T

Ergotech is a great brand for mounts, their desk mounts are either too heavy duty or not heavy duty enough due to this monitor being right between their recommended weight min/max as I have heard from the reviews.

But here are the links; this is for the 8lb-18lb monitors, and this is for the 20lb-30lb monitors. The X34 weighs between 13lb to 16lb (without that metal stand attached). I haven't been able to confirm the weight because I seen Acer state both weights. So if you wanna go safe, get the mount for the 20lb-30lb range.

Personally, I bought the minimum weight mount because it's black and a little cheaper. As well as black is the completely unintentional theme color for my whole rig!

Edit: Forgot to specify the weight of the monitor by itself

I can tell you that the Ergotech Fredom Arm holds up to 17.8 lbs (8.07kg) and works well with my LG 34UM68-P 34-Inch weighted at 17.6 lbs (7.98kg). My assumptions is that as long as the vesa mounts on both your desired arm and monitor match up and the upper and lower weights are within spec you should be fine.

Ergotech Freedom Arm - Metal Gray (FDM-PC-G01) https://www.amazon.com/dp/B008TYF0F4/ref=cm_sw_r_cp_apip_jIx8qLxn8dEYr

For the monitor and a wall mount for the tv. Let me know if you want to know that too.

It's the Ergotech Freedom Arm - I forgot to add it to my parts list.

I have this on my x34 works perfect. Sorry half asleep didn't realize you wanted dual arm... I think they make this in a dual too

https://www.amazon.com/gp/product/B008TYF0F4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

The monitor arm? its called the Ergotech Freedom Arm