What is Reddit's opinion of Ergotech Triple LCD Monitor Desk Mount Stand with Telescopic Wings, Fully Adjustable Mount for 3 Screens up to 27 inches, 25 lbs. Weight Capacity per Pivot, Black, (100-D16-B03-TW)?

From 3.5 billion Reddit comments

My bad for the late response I’m hardly on here.

Ergotech Triple LCD Monitor Desk Mount Stand with Telescopic Wings, Fully Adjustable Mount for 3 Screens up to 27 inches, 25 lbs. Weight Capacity per Pivot, Black https://www.amazon.com/dp/B007BD0MPM/ref=cm_sw_r_cp_api_i_lzoyFb5EAZEB0

Looks like a good option. I'm wondering if this is available somewhere in EU however since shipping to UK is $170!

Would this be it ? https://www.amazon.co.uk/Ergotech-Triple-Stand-Telescoping-Monitor/dp/B007BD0MPM or is there something special with the WSGF version

Edit : It's not. Looks like the WSGF version has a 5th pivot which is what will enable me to angle my 24" at 35/40 degrees

You can probably just get a 3x 27" arm like this

The specs say it only supports up to 24" monitors and since my middle monitor is 27" i don't think it will work / fit. Thanks anyways though.

EDIT1: Ah, i did fine this from the suggested search results which i think should be fine. Thanks again :)

This is the model I have: http://www.amazon.com/dp/B007BD0MPM/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=80LM7GGF1K5O&coliid=I9IZ2AGCIVVSX

It's great, will hold up to 27" screens and the outside arms tilt in as well as the mounts the actual monitors are on so there is plenty of angle. You can also turn them to portrait view if you would like.

Also the little knobs on top of the outside monitor mounts will move the outside screens up or down independently of the other screen so you can adjust as needed.

I cannot say anything regarding a ultrawide on a monitor stand. I'm guessing its gonna be hard to fit if you dont hang it up on separate pieces. I'm using this one:

http://www.amazon.co.uk/Ergotech-Triple-Stand-Telescoping-Monitor/dp/B007BD0MPM

Using 3 24" is not a problem and you can get a good angle, but I'm guessing using a ultrawide with it is not gonna work.

What I was looking for when I wanted to buy a stand was the angle I wanted me side monitors on, I wanted them quite angled, and that it looks quite nice.

The only thing I dont really like with my stand is that the foot is quite large, so I'm looking at an option to see if I can fix it to my table in some other way, so Id say keep that in mind aswell, how big the stand will be on your table.

Hey guys. As my own "little" Christmas present, I'm looking to upgrade to a triple monitor VESA setup with this VESA stand.

I'm running a 3930K/single R9 390 rig with my current monitors, a QNIX QX2710 and an ASUS VE248H. I'll most likely keep the QNIX but get rid of the ASUS, which is getting scratched as all hell as a result of me bringing it with me in the car and setting it up to stream Super Smash Bros. Melee tournaments.

I'm looking at the BenQ RL2460HT as one of my replacement monitors as I do a bunch of console and PC game streaming, and the HDMI out will be super useful to have in terms of cable management and not needing a powered HDMI splitter for my needs.

What other monitors do you guys recommend, such as in the event that I just replace the QNIX with a similar 1440p IPS panel? The ASUS PB278Q looks like a pretty solid choice, as does the Dell U2715H/U2515H. Since I'm only running a single R9 390 and don't play games like CSGO very competitively, higher refresh rate monitors aren't a huge concern for me, and especially not a surround gaming setup using all 3 monitors. If I end up keeping the Qnix, I can overclock it to at least 96Hz for the time being if I end up being interested in higher refresh rates.

Thanks in advance!

I do own my unit and can punch holes. But I don't think ready for that kind of commitment to the location. After alot of looking I think I'll go ahead get this. I wanted a C clamp mount to give that clean look, but this one well let me angle them however I want, and with a height adjust in case of any sag.

I'm using an Ergotech triple monitor mount with the through-desk adapter.

https://www.amazon.com/Ergotech-Triple-Monitor-Telescopic-Screens/dp/B007BD0MPM

I'm using an Ergotech triple monitor mount with the through-desk adapter. Monitors are bolted to the VESA mounts which are attached to the arms.

https://www.amazon.com/Ergotech-Triple-Monitor-Telescopic-Screens/dp/B007BD0MPM

This guy might be able to do it https://www.amazon.com/Ergotech-Triple-Monitor-Telescopic-Screens/dp/B007BD0MPM it's what I use for my 3 27" at work and home....until my OLED comes in Friday of course.

Pay attention to the weight limits on the arm. I tried VIVO and my monitors were slightly too heavy.

I went with an Ergotech and it works great

https://www.amazon.com/gp/product/B007BD0MPM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

This is an updated version of the well-reviewed arm i've been looking at on amazon. Its quite a bit cheaper too!

https://www.amazon.com/Ergotech-Triple-Monitor-Telescopic-Screens/dp/B007BD0MPM/

This also came with free shipping.

Typically sold from http://www.wsgf.org/products/ergotech-130-series-triple where it sells for $240 + $35 US shipping

That site also has the product video.

This one.

Maybe too expensive, but I have one, and it's great. Ergotech makes probably the highest quality monitor stands.

https://www.amazon.co.uk/Ergotech-Triple-Stand-Telescoping-Monitor/dp/B007BD0MPM/

looks like some sellers on amazon have it https://www.amazon.com/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM

Ergotech. Their stuff is expensive, but I honestly haven't seen anyone else's quality come close to them when it comes to multi-monitor stands. The bases are solid and won't go anywhere, and even if you do get a little bit of lean from one side of the arm to the other because of dis-similar monitors or just placement, they have a vertical adjustment to compensate for it on the VESA mount.

https://www.amazon.com/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM/

They also make a higher end one that can support 4+ monitors: http://www.wsgf.org/products/wsgf-ultimate-desk-stand-v2

This is the one I use. It's pretty solid. LTT did a review on it if you are interested.

The model I have is , https://www.amazon.ca/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM

I'd be looking for 200$ CAD if you want it. I live in Ottawa.

I have a tripe wide setup with 27" monitors and this is the stand I use. It works great and I haven't had any issues at all.

Any feedback is helpful :D.

I am getting the Ergotech Monitor Stand.

http://www.amazon.com/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM

Bought this stand recently, I like it a lot. http://www.amazon.com/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM/ref=sr_1_1?s=office-products&ie=UTF8&qid=1461082797&sr=1-1&keywords=ergotech+triple+monitor+stand

I've been watching the Ergotech triple mount for a while but haven't pulled the trigger because I blew $70 on one of those shitty 'mount-it' desk clamp style triple mount a few months ago. It was $150ish with prime a week ago. Truly a beautiful stand. Ergotech Triple Desk Stand with Telescopic Wings (100-D16-B03-TW) https://www.amazon.com/dp/B007BD0MPM/ref=cm_sw_r_awd_zDKxwb07QFN9W https://www.amazon.com/dp/B007BD0MPM/ref=cm_sw_r_awd_zDKxwb07QFN9W

Linus also did a review. http://youtu.be/Y-raKOW9LUc

Ergotech triple monitor stand http://www.amazon.com/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM With the 1-over-3 upgrade http://www.amazon.com/Ergotech-Group-U13-Over-Upgrade/dp/B00AT4C7IU/

I've heard great things about this one, please note the TW in the model name. http://www.amazon.com/gp/product/B007BD0MPM?colid=3SRY4PXD79TGE&coliid=I2RQ9R9BFREALW&ref_=wl_it_dp_o_pC_nS_ttl

You're not gonna get anything for under $50. There are some cheap Monoprice mounts that won't give you good angles but the best and most common is the Ergotech telescoping wing triple stand.

Edit: I see what you're saying now. Here's a cheapo mount that should work.

Probably something similar to this >> http://www.amazon.ca/Ergotech-Triple-Stand-Telescopic-100-D16-B03-TW/dp/B007BD0MPM

Mine just arrived so I'll be flying monitors too

The mount I use is the Ergotech Triple Monitor Stand w/ Telescoping Arms but theres a cheaper one without the telescoping arms

I answered the Desk question :) Here

The stand I'm using is the Ergotech Triple Monitor Stand w/ Telescoping Wings

Theres also one with non-telescoping arms