What is Reddit's opinion of Gebildet 200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe, Silver Mesh Screens Gauzes Filter with Storage Box?

From 3.5 billion Reddit comments

The following content includes affiliate links for which I may make a small commission at no extra cost to you should you make a purchase.

These were the ones that were recommended to me, I don’t have any issue with them and they fit like the factory. I’ve never had one fall out, discolor, or have wires come loose.

It’s a fine mesh screen (which I prefer to keep the CU clean)

Sorry for the long link

https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

Oh the other guy reminded me - screens. it uses a 15mm screen

https://www.amazon.com/Gebildet-Stainless-Filters-Smoking-Screens/dp/B07WTSG5ZK

best deal ever. replace the screen in the CU with a finer one (one of these). it will also fit in the oven

and direct UV will damage the LCD screen. it will become less visible over time dont let it in direct sunlight if you can help it

take the CU off immediately when you are done. dont leave it on, it will keep everything much cleaner much easier. dont leave any dosing caps in it, take them out immediately

you can double tap the power button to do boost mode, which is basically just a 2nd temp setting. so normal mode is one temp, and then double tap to switch to higher temp to finish the cap off

Btw, I never use the cooling unit (I only use the mighty with a bong) bc i hate cleaning it.

With a water pipe adapter, there's much less to clean and dosing capsules help a lot.

I bought filters from amazon. There's also a smaller size metal screen which is used with the stock cooling unit but fuck that thing.

Or, you can buy these https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_glt_fabc_SJR2ZSNXTVWVPHDB69JV and keep your CU cleaner longer. These will restrict airflow very slightly, but will keep way more avb out of the CU. Just replace the screen after every cleaning.

I found this to be too cumbersome. I got some replacement screens on Amazon and replace them every clean.

Screenz

Yes. I actually just ordered these at the suggestion of another user.

Get a box of these and you'll be set for life:

Gebildet 200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe, Silver Mesh Screens Gauzes Filter with Storage Box https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_apan_i_R9JHA4ZFJTXEWHFXQDEC?_encoding=UTF8&psc=1

I forgot to mention that I had replaced the original coarser screen with one of the fine ones! Still having this issue though. I ordered these for replacements: https://smile.amazon.com/gp/product/B07WTSG5ZK/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1

I don’t use the caps, and my mighty still looks great. My screens do get sticky/gunky around particular parts of the rim after about a 1-1.5g. I clean my mighty at least once a week, and it all goes back to looking like new again.

Take it apart, let it all soak in a small glass Pyrex bowl in iso for about 3-5 mins while I swirl the parts all around. Don’t leave it in too long, it’s not necessary. Iso works fast! Then, I take a qtip dipped in iso, and clean off whatever is left. All comes off with ease. I then rinse it all under warm water, then lay it all out on a paper towel in front of a fan.

For the oven, I heat it up to about 190°c, take a qtip dipped in iso, and clean around the oven rim/actual oven. Make sure not to use too much iso inside the oven. You don’t want anything dripping into your device. All in all, it should take about 20 minutes or less to disassemble and reassemble (drying with fan, then using a paper towel to dry the nooks and crannies).

Super easy/quick to keep it clean once you’ve made it a habit! ;) Plus the hits just stay clean and smooooooth.

**just a little tip: I like to use the end of a placker (end of any kind of floss-pick) to help me remove screens/the bands when I disassemble. These in the 15mm size are perfect for the mighty.

I personally use these and they work quite well even with dosing capsules (that's all I use in the Mighty as well). I use the same screen for the CU as I do for the oven since the mesh is fine enough for both. Haven't run into an issue yet!

I upgraded to a fine screen on my CU and I now hardly need to clean the inside of the CU, instead I replace the screen every couple of weeks. $9 from Amazon for 200 screens = https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1

Putting a screen in the capsule is extra work that isn't needed ime. I have used capsules exclusively for two months with the either the fine screen in the CU or the replacement ones from Amazon (https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) Nothing at all gets through to the CU. The liquid dosing caps could accomplish something similar.

1. Get a Starry whip and WPA.
2. Replace the screen in the cooling unit with one of these https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_9SFXXSZVXP0VF3XEYC9T . It'll keep things cleaner, longer.
3. If you microdose, use the concentrate pad on top of the herb.

Get the screen for the cooling unit here: https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_3HX0ZY7HS5QKWQ3A4MRY . This will keep it cleaner, longer than the original. You can also use it for the oven, but that should rarely need to be replaced.

I'd get the rest from Storz and Bickel.

You should rarely have to replace the oven screen, especially of you clean the oven regularly using iso on a q tip. You should definitely replace the original screen in the cooling unit (CU) either either the spare oven screen that came with the Mighty our feet singe fine 15mm stainless screens off Amazon. That'll definitely keep things cleaner longer.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_6T7SFABJ0T9SM86WPPYT

I can't see any other replies but cleaning after every use is overkill imo.

Here are screens that fit the CU and oven but frankly you can always clean the ones that came with it.

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I just cleaned mine with iso after two weeks of use. I don't think there was enough for any kind of reclaim ball. Not sure its worth letting it get extremely dirty just to get it.

For screens many get these, finer than the original CU screen.

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

As you can see, the S&B fine screen is still more fine than the Amazon alternative.

I'm a new user, so folks can correct me if their experiences differ. I immediately swapped to the fine screen as soon as got my Crafty+. After some fairly heavy use over a week and a half, I put it through it's first clean. The cooling unit screen had a fair amount of honey caked on the inside side of the screen. Likely restricting airflow, although not by much I think. I wonder if that's why the more open screen is on the unit. Could it be? Either way, I don't want shit flying into my mouth, so I don't care. Also, I'm smoking pre-ground from a dispensary.

I have not swapped it out yet. The Amazon screen is flat, whereas the S&B version is concaved. I would imagine that this makes the amazon one slightly more difficult to install.

Use the multitool to scrape off what you can, swab with multiple iso soaked q-tips, and finish off with an iso damped Mr. Clean Magic Eraser cut to fit the bowl.

Also, remove screen and replace for a better clean. You can get a pack of 200 replacement 15 mm fine screens for cheap on Amazon.

https://www.amazon.com/Gebildet-Stainless-Filters-Smoking-Screens/dp/B07WTSG5ZK/ref=pd_lpo_121_img_1/138-2958747-8233965?_encoding=UTF8&pd_rd_i=B07WTSG5ZK&pd_rd_r=22ec6ed6-2cfd-4093-a5f1-b12a26b4a622&pd_rd_w=eBEAr&pd_rd_wg=YCpp3&am...

Not OP but I do.

https://www.amazon.com/dp/B07WTSG5ZK?psc=1&ref=ppx_yo2_dt_b_product_details

They've worked great for me, no cutting. Just dome it on a fingertip and then push it into place so it flattens out to fit.

For the Mighty, I buy Gebildet Stainless steel 15mm pipe screens from Amazon 200 for $8.99. They fit like a glove for the CU and bottom chamber screen.

[https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_i_mkuyFbWJ20Q73]

My advice is to order a box of these

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_glt_fabc_MP8PAND325B7R9P73YY5

Boom

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_glt_fabc_MP8PAND325B7R9P73YY5

200 pretty fine screens in a handy plastic case. $9 on Amazon:

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I like them as they are fine and keep the CU clean, but you need to swap out the CU screens every few sessions.

Got this

200 15mm screens https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

I'm in Canada, so I don't know if this is a good link, but basically these.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_awdb_imm_36NKE4B2YVX81ENNBBA7

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_CSM681GADTJSH4H41TE3

Buy some 15mm stainless screens on Amazon to replace the one on your cooling unit. It'll keep it much cleaner for longer. https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

These are not. Fit perfectly and are fiber than the original S&B.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_0S33747R0848SBA57W21?_encoding=UTF8&psc=1

I use these one. Pretty good and very reasonable priced. Paid about $7 for 200.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_XIl3FbEJ1CVC7?_encoding=UTF8&psc=1

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_i_pA2KFb6QNH5G1?_encoding=UTF8&psc=1

200 screens for $9! Couldn't beat that price

As someone who has owned his Mighty+ for a couple months now, allow me to give you some advice.

Extra Equipment:

The dosing capsules are really awesome. I highly recommend the circular magazine and extra dosing capsules that they sell on the Storz and Bickel website, but you can definitely find them elsewhere and probably cheaper. I like that I can have something like 9 capsules on me at a time (one in the chamber + 8 in the magazine. Just realized it sounds like I'm talking about a gun here lol.) That means I don't have to keep breaking out my weed jar and pouring it into the vape or refilling the one dosing capsule they send you. Save yourself the headache. It's phenomenal quality of life for relatively little extra.

You're also going to want to buy extra screens. You can get some fine mesh ones off Amazon or from a hardware store for very cheap. Look for Stainless Steel Pipe Fitlters. 14-15mm is about what you're looking for. Lean toward 15mm. Here's a link for you for 200 of them for $8.

Optionally I would also recommend to get a backup cooling chamber, mouthpiece, o-rings, and stands/stirring tools all which can be found on the website and possibly other online retailers. I like to have them on-hand just in case disaster happens. I lost my stand in the first week or so of having my Mighty+ and had to order more. So now I stay stocked.

Definitely need to see about getting a Type-C supercharger. I had a bunch lying around because 98% of my daily use electronice are Type-C. It charges like no other with that thing plugged in. If you don't already have one, Storz and Bickel also sells one.

Also optionally, I'd like to recommend that you find a 3rd party stand for your Mighty+. Most won't fit right because they're designed for the Mighty, so you have to make sure it says Mighty+. The issue is that it either won't be a perfect fit, or it will cover the charging port on the side. I had a guy on here offer to 3D print me one that he uses and he sent it to me. All I had to pay for was shipping. The thing is awesome. He might be convinced to print you one out too if you wanted one. They do make a world of a difference though. The stirring wand/stand is rather flimsy. I have total faith that my Mighty+ will stand on its own with this stand no matter how much fancy equipment I have it hooked up to. Which brings me to my next point.

Add-ons:

The great thing about vaporizers is that they can be hooked up to a water rig. I personally have mine hooked up to a Starry Whip and a 14mm Hydratube Bubbler for some awesomr added cooling. My primary issue with the inhalation of weed in general was that it would irritate the crap out of my lungs. Vaping proved to be easier on them than smoking. Water cooling has proven to be the best of them all. Now, my lungs are only irritated mildly from there being something foreign in them, and not from there being something hot. This gives me the freedom to hard-hit higher temp rips and get high much more efficiently.

By and large though, you can have it hooked up through 17 different bongs and pipe set-ups if you so desired. It's fun to see what you can come up with. The Mighty+ really encourages experimentation and has the power to sufficiently back it up.

Yes. I ordered these at the suggestion of another user. Haven't put them in yet.

You mean these?

Gebildet 200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe, Silver Mesh Screens Gauzes Filter with Storage Box https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_api_i_V2F9VBS6PA9D0K1SS7RB

Good tip, but I just checked and they are out of stock also.

These ones?

https://www.amazon.com.au/Gebildet-Stainless-Filters-Smoking-Screens/dp/B07WTSG5ZK

Too big, you need 15mm.

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

These are the ones in the US. 15mm is the correct size. You can use them in the CU, oven and the capsules.

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

Gebildet 200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe, Silver Mesh Screens Gauzes Filter with Storage Box https://smile.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_api_glt_fabc_FAG74BV3SQJ2P39ZRKGJ?_encoding=UTF8&psc=1

Gebildet 200pcs Stainless Steel... https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

That's the ones I bought, they work great and instead of wasting time cleaning them, I can just pop a new one in every time they get junked up.

These work great on my mighty https://smile.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I swap them every 1-2 weeks

Gebildet 200pcs Stainless Steel... https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

Thanks, friend! Here are the mighty screens, even cheaper than I remembered. $7 for 200

Screens

Save your money as well

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx\_yo\_dt\_b\_asin\_title\_o06\_s00?ie=UTF8&psc=1

 

^Item Info | Bot Info | Trigger

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I bought these and put a new screen in weekly. https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_apan_glt_fabc_V0J6HVNPMYNW8NC5P0G6?_encoding=UTF8&psc=1

Capsules and the filling set, this is the brain of my operation - https://www.planetofthevapes.com/products/filling-set-for-40-dosing-capsules?variant=32229544230983

I like extra dosing caps around - https://www.planetofthevapes.com/products/storz-bickel-dosing-capsule-40-pc

I enjoy being able to swap between cooling units then clean them all at once - https://www.planetofthevapes.com/products/mighty-cooling-unit-set

I like these because I go outside a lot, I have 3 for marking Indica, Sativa, and Hybrid - https://www.planetofthevapes.com/products/storz-bickel-capsule-caddy-with-4-dosing-capsules

Fine screens from Amazon, swapping the cooling units with the fine screens make reclaim realllly nice and this is just insanely cheaper then buying 3 screens at a time - https://www.amazon.com/Gebildet-Stainless-Filters-Smoking-Screens/dp/B07WTSG5ZK/

If you want to go with a water pipe adapter and pipe then this is a solid setup for minimal costs and I love it. It allows me to never be fixed on just using water.

WPA - https://www.planetofthevapes.com/products/starry-water-pipe-adapter

Glass 14mm Left Neck - https://www.dhgate.com/product/2014-new-matrix-sidecar-glass-bong-birdcage/214701656.html

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_awdb_imm_36NKE4B2YVX81ENNBBA7

Sorry if the link is bad

Don’t clean and replace instead.

200pcs for $9 https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apip_QbTOiaQ6z5hWp

I've been using these. Very happy with them.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_glt_fabc_0JQF685EGN2387AVY60G?_encoding=UTF8&psc=1

Here’s a link for the fine screens https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_api_glt_fabc_EMYZM7DV7E62MJTCGMKK?psc=1

I bought these and they're pretty fine, similar to the screens for the oven. I'm using it right now with no issues. Amazon Link

Amazon screens that fit

Both are 15mm.... And its highly suggested to use the fine screen like the oven , in the cooling unit.

Amazon link to fine 15mm screens. https://www.amazon.com/dp/B07WTSG5ZK

Same. I used to clean the screens to reuse but I just replace it.

These have worked pretty well

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_api_glt_fabc_8WCM8K9K6VVC92H5BH0M?_encoding=UTF8&psc=1

Gebildet 200pcs Stainless Steel... https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

Next time you place an Amazon order get these. They fit perfectly and are finer than the stock CU screen. You'll have enough screens for life.

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe - $8.99 with prime

I got a box and they work great and the box will likely last beyond the mighty life time

Did you buy these? Wondering how the mesh is compared to the finer Mighty screen? Looks a little bigger

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ox_sc_saved_title_1?smid=A86AD06S3OMVQ&psc=1

I swap my bottom screen every clean.

You can purchase screens that fit like a champ. These do.

I have no problem cleaning. I get infused coconut oil with my method, too 👌🏽

I use these. Work perfectly.

https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

I got a pack of 200 at Amazon for less than$6. They work better than the original.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_fabc_FBUXFb71HT881?_encoding=UTF8&psc=1

On a different post these Amazon screens were highly recommended. Just bought some and they are the same 15mm as S&B

On a different post these Amazon screens were highly recommended. Just bought some and they are 15mm just like the S&B ones

On a different post these Amazon screens were highly recommended. Just bought some.

I have had great luck with these.

https://www.amazon.com/gp/product/B07WTSG5ZK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/dp/B07WTSG5ZK?ref=ppx_pop_mob_ap_share

These are perfect I've been using them for the top and the bottom screens

This size of screen is fine. Clean it once per week depending on usage. If you want to use it through water, get this WPA.

For the rest, capsules and temp, just your preference man. Really. You can't go wrong. Stick it in your face and get high.

I use capsules, but lots of folks on here say they just clean it while it's hot with a Qtip every time they use it, so I think that is more about how you arrange your life and if you want to do the work ahead of time or each time you're using it. Or, heck, don't even take it that seriously and use it and clean it out when you want. Worst I've seen is some staining, and if you don't care, who cares?

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_i_yZutFb9Y17F3X

These fit perfect for me.

https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_i_XaxsFb2GMP688 200 15mm screens

Cleaning is a bit of a bitch since there's no iso near me, but you can get bulk screens on Amazon. These ones work in the bowl and on the cooling unit as well. https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_other_apa_i_p.eBFbQ5TA328

I was going to put it in the OP, but I wasn't sure if posting Amazon links is okay on this sub. Looks like it's $8.99 -- but still much cheaper than $4 per 6-pack from S&B.

https://www.amazon.com/gp/product/B07WTSG5ZK