What is Reddit's opinion of GLOTRENDS Graphics Card GPU Brace Support, Universal VGA Graphics Card Holder, Anodized Aerospace Aluminum，DIY Adjustable Single/Dual Slot Cards for Computer Cases (GB1B)?

From 3.5 billion Reddit comments

omg we're buying brackets with RGB now?? seriously???? lol the PC market is insane.

I shoved one of these into the front of my case to support my Strix 3090. Can barely even see it through the window, no hassle, $13, done.

GLOTRENDS Graphics Card GPU Brace Support, Universal VGA Graphics Card Holder, Anodized Aerospace Aluminum，DIY Adjustable Single/Dual Slot Cards for Computer Cases (GB1B) https://www.amazon.com/dp/B07R45QSFB/ref=cm_sw_r_cp_api_glt_fabc_86ZFJ6CAXV21CAFV4G3C?_encoding=UTF8&psc=1

would recommend getting a stand to support the GPU. Your PCI-E slot will thank you.

I have this one. It's very nice quality.

I have a Fractal Define R6 case and use on of these without the pole extension:

https://www.amazon.com/dp/B07R45QSFB/

Used it with a GTX 1070 before the 3080. I just set it under the right corner furtherest from the motherboard, put upward pressure on the card there until the back is level, raise the foot and tighten.

I used to have something similar to the one you linked and it's ok but pretty hard to adjust in my opinion. I use this one and think it's better and easier to adjust, but only if you have room in your case.

https://www.amazon.ca/dp/B07R45QSFB/ref=cm_sw_r_cp_apa_i_4htxFb8NWQZ3C

Awesome! I was really hoping to not get a PCI holder. Thanks!

This works well enough for me: https://www.amazon.ca/dp/B07R45QSFB/

I went for something like this:

https://www.amazon.com/GLOTRENDS-Universal-Aerospace-Aluminum%EF%BC%8CDIY-Adjustable/dp/B07R45QSFB

Edit: The bracket another user posted looks even better if it fits on the mainboard. https://www.reddit.com/r/techsupportmacgyver/comments/jmhll6/my_graphics_card_was_sagging_which_was_causing/gawve6d/ It does the job so far. As long as you don't carry the PC around all the time.

https://www.amazon.com/dp/B07R45QSFB/ref=cm_sw_r_cp_apa_i_gJlKFb9P18PA6?_encoding=UTF8&psc=1

Try this one, it's bigger but universal

https://www.amazon.com/gp/product/B07R45QSFB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

This one worked well for me:

https://www.amazon.com/gp/product/B07R45QSFB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

aren't some of them adjustable, like this: https://www.amazon.com/dp/B07R45QSFB/

I got my 3080 12 GB about a week ago and just yesterday I put this support post. Works well enough.

Really, really, ridiculous. Do not do this. Invest fifteen bucks in a proper gpu brace for your several hundred dollar gpu.

amazon.com/dp/B07R45QSFB

I bought this of Amazon for the same GPU

https://www.amazon.co.uk/glotrends-universale-aerospaziale-anodizzato-computer%EF%BC%88GB1B%EF%BC%89/dp/B07R45QSFB/ref=sr_1_7_sspa?dchild=1&keywords=gpu+mount&qid=1620297024&sr=8-7-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVU8yUVVYNk9ZWURCJmVuY3J5cHRlZElkPUEwOTgxMjkyMlBZME5BTEI4WUxWQyZlbmNyeXB0ZWRBZElkPUEwNjQ0NDcxMkNCMzVIMEpZWFczTyZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Works perfectly and doesn't take much room at all, just set it up at the end of the GPU, and be at the back of it if you have room

This is the brace I’ve used

https://www.amazon.co.uk/gp/product/B07R45QSFB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Ah sweet! Yah it's this https://www.amazon.ca/gp/product/B07R45QSFB/

https://www.amazon.ca/gp/product/B07R45QSFB

https://www.amazon.ca/dp/B07R45QSFB/ref=cm_sw_r_cp_apa_i_4htxFb8NWQZ3C

https://www.amazon.ca/dp/B07R45QSFB/ref=cm_sw_r_cp_apa_i_4htxFb8NWQZ3C

It's a support brace with magnetic base and adjustable pegs. I bought it off Amazon for €13.50

https://www.amazon.de/-/en/Glotrends-Graphics-Universal-Anodized-Adjustable/dp/B07R45QSFB