What is Reddit's opinion of GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover?

From 3.5 billion Reddit comments

I used these ones. The stock holes were kinda between 2 sizes so I drilled the holes a little bigger and used the bigger clips but they fit really snug and I’ll pretty happy with how they turned out.

You can buy a kit full of aftermarket clips that work pretty good for all Honda models off Amazon for about 12 bucks. Every time I work on my car I usually break a clipper too so it's always nice to have a variety of different Honda clips on hand when you're taking apart older car. I'm usually pretty big on only using OEM parts but clips is one of the things I'll cheap out on.

https://www.amazon.com/GOOACC-GRC-30-Retainer-Expansion-Replacement/dp/B07FV5ZJL3/

I think this is what you are looking for plus a tool:

https://www.amazon.com/dp/B07FV5ZJL3/ref=cm_sw_em_r_mt_dp_KT80VRP7H1Q88PK3408W

I am sure you can buy the specific clip in bulk but this is a multipack that should fit your needs. Hope these help.

Good luck and Get Juked.

Wait! Try buying pushpins, that worked for my car. No need to go through all that hassle if you don't want to. These are out of stock rn, but they worked perfect for me.

If you’re referring to the plastic expansion pins, I picked up this set; so far, it has matched every one I’ve broken and they don’t feel like cheap plastic that shatters when it get cold.

https://www.amazon.com/GOOACC-GRC-30-Retainer-Expansion-Replacement/dp/B07FV5ZJL3

If you’re talking about bumper cover clips I think OEM is going to be you’re best bet.

https://parts.olathetoyota.com/oem-parts/toyota-bumper-cover-retainer-clip-9046705138?c=Zz1ib2R5JnM9YnVtcGVyLWFuZC1jb21wb25lbnRzLWZyb250Jmw9MzEmbj1Bc3NlbWJsaWVzIFBhZ2UmYT10b3lvdGEmbz00cnVubmVyJnk9MjAyMSZ0PXNyNS1wcmVtaXVtJmU9NC0wbC12Ni1nYXM%3D

https://www.amazon.com/GOOACC-GRC-30-Retainer-Expansion-Replacement/dp/B07FV5ZJL3

GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover https://www.amazon.com/dp/B07FV5ZJL3/ref=cm_sw_r_cp_api_glt_i_F2PPBNYANA85SCQ1G28E?_encoding=UTF8&psc=1

>https://www.youtube.com/watch?v=cUmaW2uKby8
>
>10mm retainer clip kit

Do you mean the same kinda clips which hold the plastic in the wheel well and the lining in the trunk? If so you need a tool for that. I broke alot of the ones on my wheel well cover in my G37. https://www.amazon.ca/GOOACC-GRC-30-Retainer-Expansion-Replacement/dp/B07FV5ZJL3?ref_=Oct_s9_apbd_oup_hd_bw_b9zVIQt&pf_rd_r=SF6R3325QD13K60XX1VZ&pf_rd_p=5ca13698-8367-5673-9527-0409df0547b4&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=9154011011

Heres a link to the clips and the tool needed to take them out.

Mazda 3 Grille Link Amazon Tool & Screw Also Attached a link to a tool you’ll need as well as some replacements you’ll need since some break when removing.

This. Pull the existing one out and take it to an auto parts place and look for something that matches.

Otherwise, if you go to a Mazda dealer parts counter, they can pull up the diagram for your wheel arch and can tell you exactly which part you need. If they have it in stock, you will likely pay a premium. If they don't, you can ask them for the exact part number of that pin, and you can try to find it online.

Last option would be to buy an assortment of fasteners and hope one fits, like this:
https://www.amazon.com/gp/product/B07FV5ZJL3
Problem with this option is that you end up with all these extra pins, most of which you will never need, and there is enough plastic junk clogging up our planet. So if you go this route, find someone to give the extras to. Like your local auto repair shop. Mechanics lose/break these types of pins all the time.

Give this a look. https://www.amazon.com/GOOACC-GRC-30-Retainer-Expansion-Replacement/dp/B07FV5ZJL3