Replaced the battery. It works so it's not broken so that's good. But judging off my laser cartridge, the point of aim shifted an inch to the left at 10 yards. So still usable and better than no red dot.
But I ordered a HOLOSUN - HS507K-X2
>holosun 507k
so im basically going to copycat your setup, lol. did you need an adapter for the holosun 507k? if so, which one did you pick? i seen the 507k for a good price on amazon, https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX
What about this? This looks nice, can I turn off the circle and just have the dot though?
Yeah the POM OC is awesome! Also I picked mine up from Amazon, here's the link: https://www.amazon.com/dp/B08G6SSTGX/ref=cm_sw_r_cp_apa_fabc_E0DQ8W1WDG9ENM3H24A1
Make sure that you check it's a legit optic when it arrives. I didn't have any issues but others have said to be wary of buying optics on Amazon.
I didn't get the Romeo sights. I added a Holosun 507K on after the fact and have been happy with it. the 407K and 507K go onto the XL (and I believe X as well) natively. They have better reviews than the Romeo zero (one major point being the ability to switch out the battery without removing the sight). The 407 has a 6 MOA dot, the 507 has either a 2 MOA dot or a 32 MOA circle, or a combination of the two. Be sure to get the K version of either if you go with Holosun. YMMV but I find the 2MOA on the 507K plenty big. I got mine from Amazon super easily https://www.amazon.com/dp/B08G6SSTGX
Sorry that didn't work for finding the gun. I know it's easier in TX, I just figured since it is compliant that they'd have it available everywhere.
Can you find it easier in Pennsylvania? I don't know about the legalities of cross-state border purchases but may be an option. Sig is also opening up a new experience center https://www.sigsauer.com/sec-hours if you wanted to go for a drive :) again I have no knowledge of if they would sell one to an NJ resident or if there are cross-border restrictions.
HOLOSUN HS507K-X2 Classic Multi Reticle, Red Dot Sight (Black) https://www.amazon.com/dp/B08G6SSTGX/ref=cm_sw_r_cp_apan_glt_i_YWJK33S7FBEK1W5H7CBH?_encoding=UTF8&psc=1
Sig P365 Flat Trigger - https://www.sigsauer.com/p365-flat-trigger.html
SAS Tactical Solutions optic adapter plate - https://www.sastacticalcustoms.com/collections/sig-p365-sas/products/sig-p365-sas-optic-mounting-plate
Holosun 507k optic - https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX
NineX19 non-ported barrel match barrel - https://ninex19.com/product/sig-p365-match-barrel/
Wilson Combat P365 Grip - https://shopwilsoncombat.com/GRIP-MODULE-WCP365-NO-MANUAL-SAFETY-TAN/productinfo/365-ST/
Wilson Combat Tungsten weights - https://shopwilsoncombat.com/GRIP-WEIGHT-KIT-TUNGSTEN-WCP320-\_-365-GRIP-MODULE/productinfo/NW734/
The new WC Grip module has really changed the game for me with my P365. With the stock grip the weight distribution was too top heavy, and my accuracy was all over the place even at 10 yards. Upgrading to the Holosun 507k from the Meprolight FS helped a little bit, but I was still pulling to the right and having difficulty hitting smaller targets (4" or less) at 7 yards. With the Wilson Combat grip and the grip weights, pretty much any issues I had with the pistol are resolved. I'm now shooting consistently as good with this gun as I was with any of my Glocks or my all-metal frame P938's.
Note: For anyone that orders the new WC grips with tungsten grip weights, the weights will be loose and jiggle around in the grip. One solution is to use heavy synthetic ball bearing grease on the tips of the weights before dropping them in…worked like a charm and now my 365 had the same “heft” as my 938…and the accuracy to boot!
Sig P365 Flat Trigger - https://www.sigsauer.com/p365-flat-trigger.html
SAS Tactical Solutions optic adapter plate - https://www.sastacticalcustoms.com/collections/sig-p365-sas/products/sig-p365-sas-optic-mounting-plate
Holosun 507k optic - https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX
NineX19 non-ported barrel match barrel - https://ninex19.com/product/sig-p365-match-barrel/
Wilson Combat P365 Grip - https://shopwilsoncombat.com/GRIP-MODULE-WCP365-NO-MANUAL-SAFETY-TAN/productinfo/365-ST/
Wilson Combat Tungsten weights - https://shopwilsoncombat.com/GRIP-WEIGHT-KIT-TUNGSTEN-WCP320-\_-365-GRIP-MODULE/productinfo/NW734/
The new WC Grip module has really changed the game for me with my P365. With the stock grip the weight distribution was too top heavy, and my accuracy was all over the place even at 10 yards. Upgrading to the Holosun 507k from the Meprolight FS helped a little bit, but I was still pulling to the right and having difficulty hitting smaller targets (4" or less) at 7 yards. With the Wilson Combat grip and the grip weights, pretty much any issues I had with the pistol are resolved. I'm now shooting consistently as good with this gun as I was with any of my Glocks or my all-metal frame P938's.
Note: For anyone that orders the new WC grips with tungsten grip weights, the weights will be loose and jiggle around in the grip. My solution was to use heavy synthetic ball bearing grease on the tips of the weights before dropping them in…worked like a charm and now my 365 had the same “heft” as my 938…and the accuracy to boot!
Sig P365 Flat Trigger - https://www.sigsauer.com/p365-flat-trigger.html
SAS Tactical Solutions optic adapter plate - https://www.sastacticalcustoms.com/collections/sig-p365-sas/products/sig-p365-sas-optic-mounting-plate
Holosun 507k optic - https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX
NineX19 non-ported barrel match barrel - https://ninex19.com/product/sig-p365-match-barrel/
Wilson Combat P365 Grip - https://shopwilsoncombat.com/GRIP-MODULE-WCP365-NO-MANUAL-SAFETY-TAN/productinfo/365-ST/
Wilson Combat Tungsten weights - https://shopwilsoncombat.com/GRIP-WEIGHT-KIT-TUNGSTEN-WCP320-\_-365-GRIP-MODULE/productinfo/NW734/
The new WC Grip module has really changed the game for me with my P365. With the stock grip the weight distribution was too top heavy, and my accuracy was all over the place even at 10 yards. Upgrading to the Holosun 507k from the Meprolight FS helped a little bit, but I was still pulling to the right and having difficulty hitting smaller targets (4" or less) at 7 yards. With the Wilson Combat grip and the grip weights, pretty much any issues I had with the pistol are resolved. I'm now shooting consistently as good with this gun as I was with any of my Glocks or my all-metal frame P938's.
Note: For anyone that orders the new WC grips with tungsten grip weights, the weights will be loose and jiggle around in the grip. My solution was to use heavy synthetic ball bearing grease on the tips of the weights before dropping them in…worked like a charm and now my 365 had the same “heft” as my 938…and the accuracy to boot!
Sig P365 Flat Trigger - https://www.sigsauer.com/p365-flat-trigger.html
SAS Tactical Solutions optic adapter plate - https://www.sastacticalcustoms.com/collections/sig-p365-sas/products/sig-p365-sas-optic-mounting-plate
Holosun 507k optic - https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX
NineX19 non-ported barrel match barrel - https://ninex19.com/product/sig-p365-match-barrel/
Wilson Combat P365 Grip - https://shopwilsoncombat.com/GRIP-MODULE-WCP365-NO-MANUAL-SAFETY-TAN/productinfo/365-ST/
Wilson Combat Tungsten weights - https://shopwilsoncombat.com/GRIP-WEIGHT-KIT-TUNGSTEN-WCP320-\_-365-GRIP-MODULE/productinfo/NW734/
The new WC Grip module has really changed the game for me with my P365. With the stock grip the weight distribution was too top heavy, and my accuracy was all over the place even at 10 yards. Upgrading to the Holosun 507k from the Meprolight FS helped a little bit, but I was still pulling to the right and having difficulty hitting smaller targets (4" or less) at 7 yards. With the Wilson Combat grip and the grip weights, pretty much any issues I had with the pistol are resolved. I'm now shooting consistently as good with this gun as I was with any of my Glocks or my all-metal frame P938's.
Note: For anyone that orders the new WC grips with tungsten grip weights, the weights will be loose and jiggle around in the grip. My solution was to use heavy synthetic ball bearing grease on the tips of the weights before dropping them in…worked like a charm and now my 365 had the same “heft” as my 938…and the accuracy to boot!
Everywhere I've seen it's under $300. Here's a link to it on Amazon for $290.
Think imma go with Amazon. They got a 507k x2 here
I'm thinking about this, what do you think? Do I need anything else to attach it or does the adapter plate come with the MOS?
Which Holosun model is this? I've got HS507K-X2 and it's too big.
Right?
The 507K-X2 looks similar. https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX
In terms of overpenetration, 9mm or 5.56 are both going to punch through at least 5 interior walls worth of drywall and still have enough energy to kill something on the other side. Regardless of which caliber you are using you'll have to be just as careful about overpenetration:
https://www.youtube.com/watch?v=X0qgQoej5zE
A laser isn't going to hurt anything besides adding weight and bulk and killing batteries faster, but money spent on a laser is money not spent on a red dot. A laser can be hard to pick up depending on what you are aiming at, with a red dot you just look through the glass and you can always see it no matter what.
Also I can guarantee a red dot will not slow you down, it will make you much, much faster. It's the single biggest upgrade you can make in terms of speed. No longer will you have to focus on the front sight to get a clean shot, leaving your target and rear sight slightly blurry. Instead, everything is on a single focal plane, you just cover the target with the dot and squeeze. When I added my RMR it almost instantly made me more accurate AND much faster, and improved my situational awareness by letting me focus on the target and it's surroundings instead of my front sight.
Plus you don't even have to spend RMR money anymore like I did, as you're no doubt aware by now, holosun makes some fantastic optics for their price. You can get a 507k for about half the price of an RMR.
https://www.amazon.com/HOLOSUN-HS507K-X2-Classic-Multi-Reticle/dp/B08G6SSTGX