Try the custom AI to help you find products that Reddit loves.
I've had this one for months and it supports my two 27" Acer Nitros no problem. Even has a USB hookup spot that I just use as a cable pass-through to clean up my desk a bit.
They are almost fully adjustable yes. One section only rotates 220°. Link here:
What about this? It's a lot cheaper. Maybe it's garbage but it has good reviews. I'm still waiting on my walmart frame to come then I have to get a tabletop, but I'd like to get an idea of what else I'm spending on.
I tend to lean and grab onto the table as well and I haven't noticed any rocking. I'm 6 foot and 170 pounds so I tend try and not put a ton of weight on the table just as a precaution. Here's the link to the dual monitor mount I use that I highly recommend:
As for pricing, I got the Classic SmartCore with Matte Black top and gray legs for $399 USD on sale. CAD tends to be more expensive so can't really relate since I'm in the US. However, I would pay full price for one of these desks simply because I think they're that good.
Would recommend getting a monitor arm to clear space and you won’t have to have those books in the way. HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_glt_fabc_7K9HR7K05DCJTVNDTVHX
Theyre Huanou dual monitor gas spring mounts! Here's a link. https://smile.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_apa_fabc_BB0SXAB09BKE2F743XWG?_encoding=UTF8&psc=1
The built in cable management on them is awesome as well and they're awesome for the price range. Have no issues holding my screens.
You should be good, but you might want to look for a mount with a wider base.
This is the one I have on my Bekant, notice how the clamp part is much wider: https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L/ref=sr_1_6?dchild=1&keywords=dual+vesa+mount&qid=1605991524&sr=8-6
No, because most people mount their monitors on adjustable arms that clamp to the desk. Check for the VESA mounts 4 threaded holes in the back of each monitor
HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer Screens, Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_i_Z21JA728DYD58CBTBA8X?_encoding=UTF8&psc=1
This is what I use works great and it has to ways to mount them
HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer Screens, Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_apan_i_VR73FSW98WVFN92T0J0H
Limited-time deal: HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer Screens, Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_i_dl_B40KH7AECKWWNGK11R23
I bought this for my dual monitor setup. Obviously it’s for a 27” max. But it’s really good. Insanely strong. Can push it up with one finger. Could start there.
I have the Fully Jarvis dual monitor mount and a single monitor mount (3 monitors total) and I love them. I also attached a less expensive brand that had good ratings when I was doing research if you want to check it out
something like this, that way the base is connected to the edge of your desk freeing up all that space a stand would normally take
with these things you do get what you pay for, the higher end ones will have more easier to adjustment arms
Sounds like you don't really need a new monitor at all.. if everything is working and your 2nd monitor is just for browsing/video viewing/discord, etc... just buy a dual monitor mount like this - or if you don't want full motion movement, they have cheaper ones for around $40. https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L
I got this particular dual monitor arm and it works like a charm. Everything else is exactly the same as the images I shared previously. This arm mounts exactly in the same location.
HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/
I chose that particular mounting location on the desk because of a support beam built into the desk in that location which would naturally help me distribute the forces much better.
Got this one
HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_apan_glt_i_TM236FBF9CZ5YB9A35QT
HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_glt_i_P1TYAK73E58VB3GS07R3?_encoding=UTF8&psc=1
HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_awdo_navT_a_G0TEHRNHPKQ0X685R426
Haha, yeah that is definitely a bit of a fear of mine. I got it off of Amazon (https://www.amazon.com/gp/product/B07T5SY43L), very solid, and not too expensive. Tilting is pretty janky, but I barely move the monitors now that they're in position so it doesn't really matter to me
Wonderful setup, may I ask what's your opinion on that monitor arm? I'm looking into getting this one for my 27inch 1440p and vertical 24inch 1080p setup, and I'm not sure how good it'll be.
HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_glt_fabc_2GC25ZQJHYYEWS56XTX9?_encoding=UTF8&psc=1
that's very risky decision to buy two with archlinux; portable monitor didn't work properly in many cases, and keep your two 20" monitors,
you can buy something like Dual Monitor Stand
Would it be hard mounting it to this type of VESA mount?
I don't think this has a plate sliding mechanism.
I have this 2 monitor stand and I love it. Because it’s a gas strut stand, I have full movement left right and up down for my monitors. It just clamps on the back of the desk.
Get the dual monitor mount, it'll save you a lot of space and keep your station looking clean.
I recommend this one. I've had it since March and haven't had any issues
Thing is the company I bought them from sells them on Amazon, I am going to add a link, but it is a rebranded version of some other Monitor arms, so there is a chance they're way cheaper by some other company I do not know about. LINK
Its a dual arm monitor mount
something like this
I use the Huanuo Dual Monitor arms
I am using a 27 Inch Samsung curved display, I‘m not sure which one exactly because Samsung re-releases their Monitor at least once a year.
The 24 Inch Samsung Monitor is also unknown to the same reasons.
I'm using a double mount and then a single for the vertical.
That said I've used tri monitor mounts (basically whatever the cheapest is on Amazon), I've used doubles, singles, and even wall mounted all my monitors once. Basically I did something different every time I moved 😂
Regardless I went with all the cheapest I could find on Amazon and they all worked great
For this Pic I used https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L/
Not sure honestly. Would like them raised a bit. Was considering this HUANUO Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_glc_fabc_HMJ46W3T3NMEC5GNJN0N
I have this one and while you can’t technically move them completely horizontally you can get them to move out really wide and have them close together if you have enough clearance behind your desk. Both the top and bottom halves have full range of motion and you can flatten the top half out completely straight. It may not be exactly what you’re looking for but it might get you close if you can’t find anything else. I’ve had them for a couple months now and like them a lot
Need to tidy up all those cables- grab some zip ties
If your monitors are vesa mount compatible may be worth buying something like https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L
Considering getting a standing desk, would you recommend one? Programmer here also
Thank you and Here
I have this one. Very sturdy, nice looking. Cable management is just ok. And small adjustments take some force which is good and bad. Overall I’d definitely recommend. I have 2 27inch monitors.
Huanuo Dual Monitor Stand - Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_glt_fabc_S0XY2A39BNBEDSZPE1QY?_encoding=UTF8&psc=1
You can get an adjustable multi-armed stand that’ll work for any setup you want to use. The main issue would be orientation (stacked v side by side) based on what you’re using them for and the size of your desk. You may have to invest in longer cables so that you can change the orientation if you find that having them stacked is better for you than side by side.
These stands and, some like it, allow for you to swivel or turn the monitor from landscape to portrait which can be a space saver for you as well. It all depends on what’s best for you and your workflow.
It's fairly soft, like any other mouse pad material. I don't think it would be very good to write on with a single sheet of paper...You'd likely poke through.
I just got these monitor arms off of Amazon, but they're not the easiest to adjust, I'll be honest. If I ever buy another set I'll spend a little more. But these are great if you don't need to re-position the monitors often.
I bought this monitor arm mount recently
Would it fit with a LG 27gl650f-b AND LG 27gl83a-b? If not, could anyone suggest a dual arm mount for them? (Preferably around the same price(
I’m not sure the exact one but I think it’s this HUANUO Dual Monitor Stand - Adjustable Gas Spring Monitor Desk Mount Swivel VESA Bracket with C Clamp, Grommet Mounting Base for 17 to 27 Inch Computer Screens - Each Arm Holds 4.4 to 14.3lbs https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_i_5ayyFbKH3TC3M
The double has been doing great! This is the one I have and I’m using the double clamp on the back. It’s actually over some LED strips too and it still works great. A little difficult to pull the wire management covers off but very solid otherwise.
HUANUO Dual Monitor Stand -... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
Will this work?
what I have is: https://www.amazon.com/gp/product/B07T5SY43L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It is a few years old at this point. really works well, though.
Had the same "problem" get yourself a dual monitor desk mount!
Got it from Amazon
I would recommend buying something like this for your monitors. It's going to save you a ton of desk space and make your setup look much cleaner. Also getting this would allow you to put one of your monitors in the center as opposed to how you currently have it where they are split down the middle.
After that I would work on your cable management, here's some things that can help:
You will not need all of these, but I would highly recommend 1, 2 & 4 the most.
Finally you might want to consider purchasing a laptop stand to prop your laptop up higher near your monitors, something like this
If your happy screwing into your desk you can get some cable hangers/baskets they sit neatly at the back underneath.
Wall art depending on your preference I love displate, very well made and secured to the wall with magnets.
Monitor arms can be tricky if you want more desk space, depending how the lip of your desk is you can get the ones that latch underneath and are held in place by a bolt or there are the ones that have a heavy base and take up a bit of room
I use gas strut monitor arms like this one. And I have 2 24 inch Dell monitors on them. Another monitor stand is the desk-top style which needs you to use a Hex key to adjust vertical movement so it's pretty sturdy as well.
fíjate que el soporte no es caro, te dejo el enlace del producto https://www.amazon.com/gp/product/B07T5SY43L/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 ... en su entonces pagué aprox $55, ahora está incluso en $45
I got this one Monitor Mount and it has really wide clamps that hold onto the metal part.
Maybe something like this . Make sure to neatly handle the cables. For this model, you might need a drill to make a hole in the table for it to mount.
It's just one I got from Amazon. I think it cost around £70.
Here I gomonitor stands
Sure here u go monitor stands, I bought 2
Huanuo gas strut mounts. I have 3 singles and 1 dual. They work great. Sometimes go on sale for <$20 for the singles.
dual from amazon
Same here. Have been using these for years and they are ok. If I was buying today I wouldn't buy these. Probably get something like this instead: https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L/ref=zg_bs_23572104011_1/139-3587733-4789612?pd_rd_i=B07T5SY43L&psc=1
You should get a dual monitor mount. I have this one for the exact same Dell monitors you have and it holds them well + cable management tracks are a plus
HUANUO Dual Monitor Stand,... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
Sorry for the late reply. The mount on this post for the one that comes with my monitor, which is great!. I recently bought a dual arm monitor since I finally got my second monitor for work/personal stuff. Here’s a picture of it, and it’s really good, you can adjust which way you want (swivel, tilt, rotation) they’re all pretty easy to use. This mount can each hold a 17” to 27” monitor close to 15 pounds, which for nowadays monitor’s that should be a piece of cake. I really like the cable management, I added a 2nd picture for you to see what I did. The monitor stand comes with two port usb spots that you can use. Which I did for my KVM so it makes it easy for me to reach right in front of me to switch output of my keyboard and mouse between my personal pc and work laptop. I haven’t heard any weird noises from it so far, still works as new from the box. I try my best to keep it in good condition so it can last longer. But highly recommended! Here’s a link for it on Amazon if you’re interested.
Get monitor arms so your monitors can be set more back and higher so you get more desk room since your desk is small, get a drawer and move your PC on top of it like the Alex drawer to make even more room and you will also have storage for the loose stuff on your desk and declutter. Get a headphone hanger so you don't have to store your headphone on your desk, maybe if you can switch to a more compact keyboard which will also size you desk space and make your desk look less cluttered (if you need any help when it comes to mechanical keyboards let me know) Also it seems like you are at your computer all day and from looking at your chair it doesn't look like a comfortable chair to sit in for 6+ hours I suggest getting a more comfortable and ergonomic chair doesn't have to be something super expensive just a a chair you can sit in all day without your butt or back hurting. Also for decluttering you can get sliding drawers you can attach to the underside of your desk with adhesive or screw in so you can put small stuff you use more frequent in them. If you go for the Alex drawer and put your PC on top of it I suggest velcroing all the cables into one bunch the ones coming from you desk to your PC like monitor, speakers, keyboard etc. just to make your cables look more clean, if you don't want to mount your monitors onto arms you can get two of these Ikea monitor stands which has a built in drawer.
I posted below links to the products I have mentioned.
Alex Drawer: https://www.ikea.com/ca/en/p/alex-drawer-unit-black-brown-60473548/#content
Monitor Arms: https://www.amazon.com/dp/B07T5SY43L?ref_=cm_sw_r_cp_ud_dp_ZZZNA7VR308S2QXEXF3F
Headphone Hanger: https://www.amazon.com/dp/B07BVK2FQW?ref_=cm_sw_r_cp_ud_dp_45PSDXX4KTVRQ9MM3V0F
Ergonomic chair: https://www.staples.com/staples-dexley-mesh-task-chair-black-56946/product_24398921
Desk Drawers: https://www.amazon.com/dp/B09M36448Y?ref_=cm_sw_r_cp_ud_dp_6PFH0FC8HTFHDCNX46F8
Ikea Monitor Stand: https://www.ikea.com/ca/en/p/elloven-monitor-stand-with-drawer-anthracite-00485101/
Keycron K4 Keyboard: https://www.amazon.com/dp/B08LYMDYV9?ref_=cm_sw_r_cp_ud_dp_7MP36Q9TN31QNYMJ1DX1
I have this stand on mine HUANUO Dual Monitor Stand https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
No, that wouldn't work with the standing desk. They are on this mount: https://www.amazon.com/dp/B07T5SY43L
It's... fine. Like I mentioned elsewhere, there is a little wobble to them at standing height, but the way I use my desk at standing height means that I don't really notice or care. But it wouldn't hurt to spend more for a better mount (or two separate mounts, which I kinda wish I did for more positioning options).
Idk if it'd be the best, but I have this and it works great
Fairly certain it's this one
Thanks! I’ve actually been preparing to post an update of my work setup. I got 1 dual monitor arm and 1 single monitor arm from Fully, which I use for 3 monitors now. My monitor arms are overkill because they can be rotated in any direction (horizontal/vertical). If you don’t want to spend that much I’ve heard that the HUANUO dual monitor arms are really good too!
Jarvis single monitor arm: https://www.fully.com/jarvis-monitor-arm.html
Jarvis dual monitor arm: https://www.fully.com/jarvis-dual-monitor-arm.html
HUANUO Dual Monitor Stand: https://www.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_api_glt_i_AR4W5MBRPV5R7BRRR5BA?_encoding=UTF8&psc=1
Here you go!
Dual monitor with 27” arms on my uplift (60x24)
^Item&nbsp;Info | Bot&nbsp;Info | Trigger
27” and the mount is: HUANUO Dual Monitor Stand -... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
Here you go.
Dual Strut Monitor Stand
Get a dual monitor stand it will make things so much better.
Thanks! And this is the mount: https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L
Both these monitors are heavy, especially the curved ultra wide and it does a great job!
This one probably
If it is, I have the same one. Works great.
Monitor Arms - HUANUO Dual Monitor Stand -... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
Monitor - Asus mx279h
Monitor Adapter - VESA Mount Adapter Compatible... https://www.amazon.com/dp/B081B8R7MV?ref=ppx_pop_mob_ap_share
You need the monitor adapter to connect to the arms since the monitors don’t use vesa mounting
HUANUO Dual Monitor Stand -... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
Pretty nice because it comes with a table clamp so you don’t have to drill into your desk/table.
I just received my Secretlab Magnus desk.. unfortunately my current dual monitor arm didn't work (same issue with the C clamp and the cable management tray). I took a chance with this mount https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L&ved=2ahUKEwit3qK44YHzAhWTJzQIHTMbBrMQFnoECBMQAQ&usg=AOvVaw2-SB0Kv7ZRPNWpK9R6byMW and it works great!
Sure, got them on amazon here: https://www.amazon.com/gp/product/B07T5SY43L/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1
These are great, I just posted my setup a couple days ago. Any arm with a gas spring makes it easy to move around and stay put.
Yeah when the desk is low, no wobbles. When it’s higher (I think around 43?) there’s some slight wobble. But I’ve gotten used to it. I grabbed these:
It's amazing for the price. Both me and my friend have it and it works great!
They're actually on a monitor stand, the laptop in the middle just conceals it nicely :)
The two horizontal monitors are held by this Hanuo Dual Arm stand, and the vertical one is on the single arm version.
You'd be looking for a mount with gas arms, like this. Gives each monitor independent movement
There are different models you could choose from, i have this one :
got a dual monitor arm from amazon
The monitor mount is This one and the camera is the Razer kyro
If it’s the same as mine it’s this one: HUANUO Dual Monitor Stand -... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share
Wouldn't this work? https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L/ref=sr_1_1?dchild=1&keywords=monitor+stand&qid=1611823754&sr=8-1
I have these and the arms go down pretty far and don't stick out much.
I got these.
Yeah. I haven’t actually mounted them yet, but I know what to get. If you look on the specs you can see that each monitor weighs 9 pounds, and support vesa mounting. These are the mounts I’m looking into buying:
Both should work, I’m just letting someone give me it as a Christmas present.
Depending on how the thick the glass is and how spread out the legs to the mount can spread out. Generally you wouldn't want to bc monitor mounts create a single pressure point whilst leaning said pressure point forward and backwards (not visible). If the pressure point exerts too much and for a long time, your glass top will shatter. If the too isn't too thin, you can go for a stand like this bc it's footing is pretty spread out and won't create a harsh pressure point:
If you're only using one monitor, there's no real point in getting a mount bc a normal single monitor leg stand doesn't really take that much room tbh, but if you have multiple monitors and don't want all of the legs to take up the desk space, you can get something like this:
Or you could always just hang it up on the wall if you have the desk against one:
It really depends on what yoy do. If you use your setup for production, get a dual monitor arm like this one
If you use it for gayming get 2 single monitor arms like this one
Yeah, I meant a desk mount. I impulse bought this one off of Amazon and its been doing the trick for me so far. I’ll update with a pic of my setup when I get home.
Yea sure! Here they are!
Dual Monitor Arm: HUANUO Dual Monitor Stand Link
Monitors: LG 22MK430H-B 21.5-Inch Full HD Monitor Link
Not sure if this is the right sub for this, but I'm looking to purchase a dual monitor arm. Any suggestions? I'm looking from something that can be flattened against a wall, probably using some sliding mechanism.
From what I can find there's only these arms that stick out from the wall if you want the monitors to be right next to each other: https://www.amazon.com/dp/B07T5SY43L
i dunno man, i dont know what kind of monitors you have, but i would cheap out on some 20 dollar stand to hold 2 expensive ass monitors. im in the market for one myself since I order that 27 dell every chief here approved of. currently looking at this mount:
Oooh, no, but I really like the one you posted, it matches my new chair! I have this one coming in: https://www.amazon.com/gp/product/B07T5SY43L/ ($56)
One of their dual monitors stands has a $10 off coupon. This brings it from $56 to $46.
I would gladly take the increase for $18 more.
I can vouch for this 100%. It feels super sturdy
I got this.
You need better arms for example https://www.amazon.com/HUANUO-Dual-Monitor-Stand-Adjustable/dp/B07T5SY43L/ref=sr_1_7?dchild=1&keywords=dual+monitor+arm&qid=1596966398&sr=8-7
Each arm has independent adjustments so that should fix the uneven vesa mounts height of each monitor
I ended up ordering this one. Ended up getting it for $44
Looks like this one from amazon. I have the same and love it. HUANUO Dual Monitor Stand -... https://www.amazon.com/dp/B07T5SY43L?ref=ppx_pop_mob_ap_share