What is Reddit's opinion of
J-Tech Digital Premium Quality 1080P HDMI to HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH)?
From 3.5 billion Reddit comments
147 reviews of this product found across Reddit:
You could try an audio extractor like below or something similar:
- HDMI Out from Shield to HDMI Audio Extractor In
- Red & White RCA cables from extractor to sound bar
- HDMI our from Audio extractor you TV
This might work but I don’t know if it will. It’s worth a shot.
I figured out the issue was due to HDMI SPDIF extractor box, it sits inline between the PS5 and monitor, and splits off the optical SPDIF signal. With just a direct cable run from PS5 to GP27U I can get 2160P and HDR working. I was using this one https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E
It seems that GP27U is kinda sensitive to intermediate boxes, I used to have a DisplayPort KVM, and with it in picture DP connectivity was flaky. Luckily GP27U can do all the inputs switching itself. But it more sensitive compared to my old Acer X27.
So here’s what I did. I bought this - J-Tech Digital Premium Quality... https://www.amazon.com/dp/B00BIQER0E?ref=ppx_pop_mob_ap_share
I connected that to my projector, then the Roku to the adapter. Then I used the red and white RCA cables from the adapter to my speakers and it is plenty loud enough now. Basically it’s just passing the audio through the hdmi port instead of the 3.5mm audio Jack. Took a little trial and error but I finally got it.
I have my old regular Chromecast hooked up to an HDMI splitter to get RCA out:
Then I have that plugged into an SA-50 amp and KEF-Q150 speakers.
You need to plug the Chromecast into a TV to set it up, but after that you can just use it "headless" with nothing plugged in to the HDMI out of the splitter.
looks like an audio extractor might be what you're looking for
So after I had bought the projector, i was informed that it didnt have a way to simply connect 1 hdmi cable from my then xbox one x to the hdmi port on the back of the projector, and from the back of the projector connect the optic cable/rca to 3.5 mm jack. I tried both and my speaker system works. Troubleshooted it and could not make it work. I went on a couple forumns and i found out that my specific model of epson projector doesnt have an audio out to directly plug it in to my speakers. My speakers work with optic audio, 3.5mm input jack, and bluetooth audio.
Here is the device that was able to make it work for me. https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E/ref=mp_s_a_1_3?crid=1B42LCM00VOWW&keywords=J-Tech+Digital+Premium+Quality+1080P+HDMI+To+HDMI+%2B+Audio+%28SPDIF+%2B+RCA+Stereo%29+Audio+Extractor+Converter+%28JTD...
I would like to have a projector that i can connect my media source (usually xbox one x/gaming pc) directly to the projector by 1 hdmi port, and then from the projector i want to be able to connect an audio cable (either optic or rca cable) directly to my speakers and then be done with it.
I was thinking this one: J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glt_fabc_DK417E0NS95XE26AB9CW?_encoding=UTF8&psc=1
The only other solution I've read about is buying a Chromecast (Gen 2 or newer so you can add to speaker groups) and also buying an HDMI audio extractor like this one: https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_apan_glt_fabc_3N573YS17QNMNBTTEQMG?_encoding=UTF8&psc=1. This is the only way I've read about to replicate what the CCA does.
But once you're buying a $25 Chromecast plus a $25 audio extractor, you mine as well buy this CCA for $48. In my opinion. Also not sure if the audio extractor would create any kind of lag. It may not, but I haven't tested out this solution for myself.
If you have an existing Chromecast, people have recommended doing something like this: https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_apan_glt_fabc_2DQBAH0D7XN1V413MHQ7?_encoding=UTF8&psc=1. The downside with Gen 1 Chromecasts is you can't add them to speaker groups.
>Samsung UA40FH5000
That is exactly right! You got it. See this LINK for an example of an HDMI extractor you will need to achieve this. You can get whatever is available in your country as long as it is similar to this one.
Alright so I'm thinking you could use this, by running an hdmi cable from the tv to the 'hdmi in' slot, an hdmi cable from the 'hdmi out' slot to the Sonos, and connecting RCA cables from the turntable's pre-amp to the L and R ports.
This is assuming that you are planning on using a pre-amp, if this seems feasible/makes no sense let me know.
You should be able to use the newer Chromecast with and HDMI Audio Extractor . I haven't tried it but it should work...theoretically. I've been considering this for when my Chromecast Audio craps out. I had two of them but one crapped out already.
Ok so now what hdmi adapter do I get? Is the official Astro one the recommended one or will this one work just as good only it’s a bit cheaper?: J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glt_fabc_QDH6M6TT9DJ57566VNEV?_encoding=UTF8&psc=1
I'm assuming you mean Roku Stick or the other little one that doesn't have audio output.
If the projector doesn't have an audio output - then you'll need an HDMI splitter between the Roku and the projector.
Something like this - https://www.amazon.com/dp/B00BIQER0E/
You need to split the audio and video signals before they get to your TV, essentially treating your TV like a monitor/projector.
Apologies that this isn’t an EU link, but you need an HDMI audio extractor.
Plug your video source into the HDMI in, run an additional HDMI cable from HDMI out to your TV, then get the Sonos HDMI to Optical adapter and use that to connect to your Beam.
Your TV will not control volume this way. It will probably disappoint you unless you have a smart remote that can do both.
I would buy a new TV if it’s in the budget, even a used TV, with HDMI ARC.
You probably need a splitter like this. J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glt_fabc_Z060H9XM8RVPH42VHTBA?_encoding=UTF8&psc=1
I ended up with this extractor and for HDMI any one you have should be okay! If you're worried grab a new 2.1 HDMI but I don't think it supports that so it probably doesn't matter much!
Extraacting the digital stream from HDMI is a pretty simply function with modern integrated circuits. It is very unlikely that you will experience any benefit from "name brands" or excessive prices for such simple technology. The chips that do this extraction cost only a few ören whether you pay 200 kr or 2000kr. Don't sweat it. I would expect that a generic gadget from China will operate perfectly.
Example: J-Tech Digital HDMI To HDMI + Audio Extractor Converter
Your setup is very similar to mine, and I found a solution that works for me: I use an HDMI audio extractor (this one) to go from the chromecast's HDMI-out to RCA audio cables, which then go into my receiver. As long as I keep my receiver turned on and set on the input the chromecast feeds into, I can cast music to my speakers easily from my phone whenever I want. The other caveats here are that that chromecast serves only to play music through my receiver, and that the chromecast and extractor both need their own power supplies, so it's created kind of a nest of wires behind my receiver.
That said, it works beautifully. I was even able to set the chromecast as the default music output for the Home Mini, and spotify as my default music streaming service, so that a simple "okay google, play (insert artist, song, playlist, etc)" will start music playing from my receiver/speakers.
Why not! You could use the Tuner, CD, or Network input on the Marantz to output your TV audio through the speakers! (If your TV doesn't have an RCA output you can buy an HDMI audio extractor) I highly reccomend hooking your TV up to the stereo! Getting good sound with tv, movies, and video games has been an unexpected benefit of my Vinyl stereo system which I really enjoy and you have all the equipment you need to do it so you may as well!!
The hdmi input is what I will be using. I believe you just helped me out. I bought this on Amazon thinking it was just and a simple audio converter not needing the hdmi part. But i see now it extracts the hdmi so I plug the input to it then to the projector
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glc_fabc_wYVZFb21YTHGE
If those are really all the plugs your tv has, it might just not have an audio out at all. I suggest running the audio into the receiver before it gets to the tv. That component input at the bottom is easy enough to do as the audio is already rca. For the HDMI sources, they make breakout boxes that will pass the video through and give you audio outputs, like this. That's just the first one I found after a google search, no idea how good or bad it is, and I have no experience with these things personally, but it is an option.
how do i get an option to change optical audio using an audio extractor i bought from amazon for the series x
here’s the extractor J-Tech Digital Premium Quality... https://www.amazon.com/dp/B00BIQER0E?ref=ppx_pop_mob_ap_share
maybe the extractor is the problem?
I bought this so that I could use a chromecast to send music to my stereo receiver: https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E/ref=sr_1_4?dchild=1&keywords=jtech+hdmi+extractor&qid=1603463624&s=electronics&sr=1-4
No complaints so far. You'd just need an RCA->3.5mm cable to run from that to your amp.
I got your answer!
https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_em_r_mt_dp_qWAIFb8MC5PAM
Works well...
However, that only does 1080p and below... if you need 4K... you’ll find links on that page that do 4K... 4K might be a little trickier because it not only has to do 4K at all th frame rates but hdr as well... keep that in mind...
Nothing wrong with refurb 1060, i just mentioned new since new was still within your price range.
Note however that the epson 1060 doesn't have an audio output jack, so you will have to buy an HDMI audio splitter like this to get audio our of it.
As for good sound systems I can't comment, I use a run of the mill logitech 2.1 sound system with mine and it's fine for what I wanted.
I have one of these.
An Epson Home Cinema 1060 would be a good inexpensive first projector. It's very bright and puts out a pretty nice looking image.
At 6.5 feet away from the screen it will make a roughly 85" image. However you could make it as small as 72 ish with the zoom dial.
The one downside is that the projector doesn't have an audio out jack. You'd need to use an HDMI audio splitter Like this to hook audio to external speakers.
EDIT: I believe the Epson HC1060 is branded as the TW650 in Europe.
The extractor I use is no longer available, but a quick search found this one with really good reviews. It is for a single source and is about $25.
Any one that you get might require changing some settings on your source in order for it to work correctly, but I rarely have issues with mine.
Have you considered using an hdmi sound extractor thingy Amazon ? (that's just one I found in a quick search, do your own reasearch before buying)
Plug your chromecast into that, hook up the optical out to your soundcard on the rpi, then the audio out of the soundcard to your TV or whatever.
The raspberry pi would just run raspbian and power the sound card, no other software needed.
Then you can just use the chromecast like your normally.
> Would an HDMI audio extractor be my only option here?
It would be your best option. I used this one for a while and it did the job just fine. A huge advantage over an aux cord from your controller is that the audio quality will be much better, especially if your speakers have optical input, and you use the optical output from the extractor.
If you do go sound bar route, you can get an audio extractor like this one.
https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E
I have this hooked up to my HD27HDR with a Vizio sound bar and works great and no need to swap out any HDMI
You need an HDMI audio extractor into Toslink or something, then send that to the Modi if you want everything to go through the Modi.
Hi mate the best way whoud be to pass it through a " hdmi to hdmi audio extractor". order something like this when you are ordering your hdmi hub. It might be a bit messy cabling wise but will get the job done.
https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E?ref_=fsclp_pl_dp_1
Bluetooth isn't supported on ps4 at all. You can connect normal wired speakers though a USB sound card or plug them into the headphone jack of the ds4.
Other that that, I think you can buy a hdmi audio splitter to output the sound to speakers. Like this https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/ref=mp_s_a_1_3?ie=UTF8&qid=1537281530&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hdmi+audio+extractor&dpPl=1&dpID=51OckVyi8YL&ref=plSrch
I tried a similar setup a while back. There is noticable input lag when going through a PC. Playing the two side by side, it was under half a second, probably around 200-250 milliseconds.
If you want to get around that you can get a DAC with an analog or optical in. For optical in you can pass the Switch HDMI through an audio extractor like this: https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
Note that if you use this you can't get 5.1 surround because the Switch only has LPCM5.1, which is too much bandwidth for an optical audio cable.
An update, yesterday I doubled down and bought the RCA version of the HDMI audio extractor I had (https://www.amazon.com/gp/product/B00BIQER0E/ref=od_aui_detailpages01?ie=UTF8&th=1) and figured I'd just return both if it didn't work.
For reasons unknown to me, it worked. I plugged in an RCA to 3.5mm adapter I had and boom. I have no idea what happened, but I just figured I'd let you know and anyone who will happen to come across this thread. No surround sound obviously, but I'll mostly be using my headphones, so not a huge deal.
Thanks for all your help!
The roku express is HDMI out. I have the same model. You'll need an HDMI extractor like this one. Assuming your projector has HDMI in.
One of these guys (or something like it) will split the audio out for you J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (Support Apple TV 4 Gen) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_MLaJAbWS72FEY
The adapter, is Lightening to HDMI/lightening. So i can charge my phone and stream it to the capture card. Would that still work?
Since you're already using an HDMI dongle for your phone, grab an HDMI audio extractor and use the Composite left/right stereo sound as your own personal phone audio.
Something like this : https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/ref=sr_1_3?s=specialty-aps&ie=UTF8&qid=1515564740&sr=1-3&keywords=hdmi+audio+extractor
Also, as you seem to have an increased amount of needs on the audio side, maybe you should look into getting a USB audio mixer, and just output your Mixer to your speakers/Headphones so that you have the whole mix.
This seems to have great reviews on amazon. According to the reviews, quite a few use it with SONOS to increase format compatibility. The 4K version is 2x the price of the 1080p version. Some TVs have an HDMI out (For Samsungs, it’s a semi-hidden Mode) so you could save and just buy the 1080p version.
https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
A little more expensive route is to use an adapter - this should do the trick, assuming the projector has RCA or SPDIF inputs. Use HDMI cable from Pi to adapter, HDMI/VGA adapter from this adapter to the projector. RCA cables from this adapter to projector for audio.
Amazon sells HDMI audio extractors. I've used them before. Works fine. Is HDMI coming out the console?
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (Support Apple TV 4 Gen) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_apa_rB4AzbEW8DPWW
This is what I have used.
No. But you can obtain an optical output with an HDMI audio extractor.
I cant speak specifically for the linked one, but I have heard that extractors work just fine for devices with no optical out standard. I used an old BOSE dvd player to get optical out from my Xbox 360 and it worked great.
If your projector doesn't have an audio out then there are things that will split the audio out of your HDMI signal. Then you can plug in your speakers directly. This was the top result when I googled it but look around. There could be better ones for you.
No, you cannot.
However you can separately purchase a HDMI Splitter Example to split the audio from the video off the HDMI output of the Chromecast. The Splitter HDMI output is cabled to the TV and the Splitter Audio output is cabled to your audio amplifier.
This configuration will allow you to listen to the audio over your audio speakers, while watching the video on your TV.
option 1. get a fancy stereo that has HDMI passthough. you plug the CC into the stereo.
option 2. get a fancy doohickey - an hdmi audio extractor
option 3. run an audio cable out of the TV's headphone jack and into your stereo
Just two weeks late lol my bad. Life is crazy when you work two jobs.
The delay time is very minimal, I can't really tell at all that there is one in fact. My only caveat is that the device isn't powered by usb, but traditional electricity. Other than that, it's fantastic.
And the market models for the PS4 and XBO going into the future are different, you can't compare them. The PS4 started out as the premium option being more powerful than the XBO. Since release, the XBO's price has gone down considerably making it now the cheaper option. Where the PS4 diversified into a lower and higher tier, the Slim and Neo respectively, the XBO has stated from the bottom and added two higher-tier options, the S and Scorpio.
PS4 XBO / \ \ Slim Neo S -> Scorpio
The starting points were different, but the end result on both sides is three tiers that give the consumer more options.
If you're going to buy the cheap version, you're probably not going to care about hard drive space and if you're really miffed that there's no optical port these exist.
The XBO S is not on the same level as the Slim, that's comparing two different models. That's like comparing an iPhone 6S+ with some cheap phone that I've lost track of the name of. The XBO S is more on the level of the original PS4, albeit slightly updated with some newer features like 4K video playback. No one is going to have to choose between the One S and the Slim, they're going to have to choose between the One S and the Neo.
For the office. You just need this: Yea, I know its dedicated, but it seems like you have the extra wiring. If not, then HDBaseT is your option
Regarding your second monitor, all you need is this:
https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
Regarding the double switching, you could do that. Personally, I would just spend the money to do it right. But, It's not my money :) I bought my 6x6 Gefen off of ebay for like $1100 bucks, but it was admittedly a pretty good deal.
Something like this will pass through the HDMI video and split out the audio. Video goes to your monitor, audio goes to speakers.
I see. I'd rather not chance ordering the Bluetooth adapter and it not working.
I decided to go this route
J-Tech Digital ® Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_awd_CsKowbC0N9N3J
HDMI CAN output sound. It doesn't necessarily output sound. You would have to check your graphics card and drivers etc.
Also any device you insert into the path has the potential to break HDCP protection and potentially your connection in general. It may also be highly limited as to its resolution support. That said this might serve your needs http://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/ref=pd_sim_23_1?ie=UTF8&dpID=51OckVyi8YL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0XS0029ZNV2D3PAGMCE2
You're saying you're buying a new home theater system. I assume that you're getting a receiver?
Usually you would connect your chromecast to your receiver and your receiver would connect to your TV.
If you're not getting a receiver capable of taking HDMI, then your TV must have some way to get the audio signal to your amp.
There are also solutions which can extract audio from HDMI, like this audio extractor: http://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/ref=sr_1_2?s=electronics&ie=UTF8&qid=1443762913&sr=1-2&keywords=hdmi+audio+extractor
This will do what you're looking for, giving you both an optical and stereo out of your hdmi line from the WiiU. http://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/ref=sr_1_2?ie=UTF8&qid=1442257542&sr=8-2&keywords=hdmi+optical
I just got an Epson 730HD, and was facing the same issue. What you should do, at the minimum, is get this:
This way, you put your source into that box (I have a Chromecast plugged into it), then use the HDMI Out to connect to your projector. Then, you can use any of the various audio output sources from that box (rca, spdif/optical, 3.5mm aux) to connect to your speaker source (speakers, soundbar, home theater system, etc). Also, turn the projector volume to 0 so that the only sound source is your chosen speaker.
The only wire that should go to the projector is the output HDMI from that box.
Hope that helps!
Get this off Amazon Just sign up for the 30 day trial for Prime if you don't have it already
J-Tech Digital ® Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_awd_hMW1vbXZGPZ27
J-Tech Digital ® Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_awd_jv8uvb1609GQZ
Edit:get a dss from ebay and an optical cable,you will need to get a 3.5 mm to whatever ports your system needs but this is what I do to make it do 5.1
Don't you actually have two problems? First, you need the speakers on the TV to not produce output. Second, you need the RCA outs to work.
Can you get the TV's speakers to shut off?
Can you confirm that the RCA outs are actually non-functional by plugging a line-level device into them? It's possible that they aren't able to drive your headphones.
Worse comes to worst, you can get one of these if you can't get the RCA outputs to work.
Nice. I do the same thing, but I use this adapter to get the optical audio out to my hifi system and pass the HDMI on to my TV. That allows me to use the Chromecast with the TV, with the hifi, or with both.
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://smile.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glc_fabc_B6DbGb69DYR26?_encoding=UTF8&psc=1
u/applemastarace Amazon
A $25 box like this would strip the audio out of the HDMI to 5.1/2.0 optical/TOSlink out (or analog left/right) and pass the HDMI through to the TV.
- 1080p https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E
- 4k https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B074HHSJVN
This way you can use any streaming box you like that has HDMI out. Which I think makes more sense than choosing a streaming box based on it's audio out features.
This one looks like it's 4k or 1080p for $23 https://www.amazon.com/dp/B07W4NDDVW but it has a lot less reviews (the first two had 2,000+ reviews).
> using an optical cable, will audio still be 5.1 or will the TV downsample the audio to stereo?
Depends entirely on the TV. Some will output 5.1 over optical. Some will downmix to stereo. Some have a setting to switch between the two options.
If your TV only outputs stereo, and you need 5.1 over optical coming out of your Apple TV, you can buy a HDMI audio extractor from Amazon for about $15-30.
1080p support: https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/
4K/HDR support: https://www.amazon.com/J-Tech-Digital-Extractor-Converter-Passthrough/dp/B074HHSJVN/
My monitor doesn't have a 3.5 out for sound, so I use something like this: https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/
It works well enough. I use it for all my hdmi devices: Wii U, PS4, Firestick, SNESClassic.
This is the actual one I bought: https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072 But the one I posted before has better review ratio.
My biggest complaint is that is plugs in with a powerjack that needs to take up multiple slots. It would be swell if it were USB powered. Let me know if you have any questions?
Like this one: http://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/
Edit: HDMI Audio extractor is another work around.
ThisThis Is what will work for cheap.
I ran into the same problem with my home. I wanted 5 zones of independently controllable audio that could be synced across any or all of the zones whenever I wanted.
Over the years I have owned Sonos products, Denon products and I have ditched them all for Logitech Media Server (see below)+
High Cost, easy: If you just want plug and play and play it's going to be hard to beat the quality and easy of use of a system such as Sonos amp or Denon Heos. But as you saw, you are looking at $400 to $600 per zone and the company may obsolete your system tomorrow, read about the 1st gen Sonos products.
Lower Cost, easy, some minor limitations: A small step down but a massive cost saving would be to use several Google Chromecast with a HDMI extractor such as Amazon Link. These work great and can be setup to sync or play independently.
Very Low Cost, every feature you ever wanted, be ready to tinker: If you are looking for a project to get all the bells and whistles of a very high end system such as Sonos or Denon for a price that can easily be < $30 per zone check out Logitech Media Server. You host the server either directly in Home Assistant or in a separate Docker. In my case I have an Unraid server and run it directly within Unraid docker.
For clients there are many options, I use a mix of
- Raspberry Pi 3b running https://www.picoreplayer.org/ and using InnoMaker Raspberry Pi HiFi DAC HAT PCM5122, they also have a nice case, innomaker Acrylic Case
- https://www.hifiberry.com/ is another very well known and well respected DAC for the Raspberry PI, they also have very clean cases.
- https://www.hifiberry.com/ is another very well known and well respected DAC for the Raspberry PI, they also have very clean cases.
- Several ESP32 running https://github.com/sle118/squeezelite-esp32 with a custom 3D printed case, tied to a PCM5102 using I2S. Some of my units have OLED displays, others are just black boxes.
- See https://forums.slimdevices.com/showthread.php?112697-ANNOUNCE-Squeezelite-ESP32-(dedicated-thread) for more information than you can ever want. The developer is very active and super friendly and helpful.
- This project is now very mature and has been rock stable for me for over a year running on 3 devices including one that just outputs of SPDIF.
- If you don't have any microcontroller programming experience or electronic hardware experience this may be a very steep learning curve.
LMS has full support by Home Assistant (Play, Pause, next track, volume...). There is also a alternate skin for LMS called https://github.com/CDrummond/lms-material which is one of the best mobile interfaces for a music control system I have every used.
If you do decide to go the LMS route feel free to reach out to me if you need any advice or want some help getting ESP32 Squeezelite running.
Something like this will take the audio portion of a chromecast's output and let you use it with normal rca connectors like the cca used to.
Not all TVs can pass 5.1 from HDMI to Optical. I've used something like this in the past: https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E/
Looks like bluetooth is the easiest option. The only other option would be an HDMI audio extractor with an optical output, like this.
So the HDMI splitter won't get you any sound. You will still need an amplifier for that. Your PS3 has a digital audio output in addition to the hdmi. Your PS4 only has HDMI. Your PC should have a headphone Jack. My suggestion would be find a cheap used receiver either on shopgoodwill.com or on FB market place that has digital audio inputs and RCA inputs. You can get an HDMI extractor that will convert the HDMI audio to RCA. You can plug your PS3 into the digital audio inputs and get an headphone to RCA Cable for your computer.
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_apan_glt_i_8YSQ1T11470PCVKA2KKQ?_encoding=UTF8&psc=1
Amazon Basics 3.5mm to 2-Male RCA Adapter Audio Stereo Cable - 8 Feet https://www.amazon.com/dp/B01D5H8KO2/ref=cm_sw_r_apan_glt_i_7R4AGGXH0HV08CTS9KJT?_encoding=UTF8&psc=1
Amazon Basics Digital Optical Audio Toslink Cable for Sound Bar, TV - 3.3 Feet (1 Meter) https://www.amazon.com/dp/B00L3KO5WK/ref=cm_sw_r_apan_glt_i_M5KNNHRPH8A79B3W6HW0?_encoding=UTF8&psc=1
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| J-Tech Digital Premium Quality 1080P HDMI To HDMI… | $25.95 | $25.95 | 4.4/5.0 |
^Item&nbsp;Info | Bot&nbsp;Info | Trigger
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| J-Tech Digital Premium Quality 1080P HDMI To HDMI… | $25.95 | $25.95 | 4.4/5.0 |
^Item&nbsp;Info | Bot&nbsp;Info | Trigger
I use one of these to do exactly what you're describing
Mine just died but i had https://www.amazon.com/gp/product/B00BIQER0E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
on hand and its working so i guess ill use this for now
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glt_fabc_SYX7RGVPBVR3SKJGDQ5Z?_encoding=UTF8&psc=1
I just watched this video and he recommended this adapter might have to give it a shot.
https://www.amazon.com/dp/B00BIQER0E/
There's cheaper trash available - read the reviews before buying
Some TV’s will not output 5.1. Buy this: J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_glt_fabc_rBMeGb23Z98VM
I have a PS4 slim and I was having a similar issue since there is no optical port on it. I used this to connect the optical port from my PS4 to headset (Arctis Pro Wirelss). This version is for 1080 P https://www.amazon.com/gp/product/B00BIQER0E/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 and this version is for 4K https://www.amazon.com/J-Tech-Digital-Extractor-Passthrough-JTD18G-H5CH/dp/B074HHSJVN/ref=psdc_280341_t2_B00BIQER0E.
I have done some more research and I think HEOS can only share analog signals. I am going to get an HDMI audio extractor and try running to the analog input for the CBL/SAT option. I will report back, but I am pretty sure this will work. Going to pipe the Super Bowl through the entire house!!!
Here is what I am getting - https://www.amazon.com/gp/product/B00BIQER0E/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Should have mentioned that my DVD player doesn't have an optical out :-(
I just ordered this. Hopefully this will solve the problem.
https://www.amazon.com/gp/product/B00BIQER0E/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I have used this J-Tech one in a couple of places around the house for casting music only to powered speakers. It works well for this purpose. https://smile.amazon.com/gp/product/B00BIQER0E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Having some issues getting 120fps on Fortnite on PS5. I've done some reading and apparently 120fps is possible on Fortnite for PS5 if you enable performance mode. I've done this, but I still can not get 120fps.
I have a 144hz monitor
I use Astro headsets which requires an adapter due to PS5 not having optical port. This is the adapter I own due to Astro being out of stock when I bought my PS5
I also have HDMI 2.1 going from my PS5 to the adapter, and then another from the adapter to my monitor.
Still, with all of that, I can not seem to get 120fps on Fortnite. Does anybody have any ideas? Is the adapter the problem? I've ordered the official Astro one (should be here tomorrow) now that they are back in stock. I'm just curious if there is maybe something else I'm missing.
Thanks!
Hi guys!
Quick question: I am finally graduating to purchasing my first DAC! So stoked. I’m going with the Audio Engine D1, and am hoping to complete a setup where I can use the optical audio input (for higher bit rate and sample rate) vs. the standard usb connection.
The only port I have available on my PC is a DisplayPort, so I’m wondering if I bought a DisplayPort to HDMI adapter, then run an HDMI cable from the adapter to an HDMI audio extractor, then run an optical audio cable from the extractor to the DAC, if that would work to achieve the higher bit/sample rate? (Also, if I’m way over complicating this, please let me know haha, or if this is even worth doing for the higher bit/sample rate).
Thanks in advance!:)
Links:
DisplayPort to HDMI Adapter:
HDMI Audio Extractor:
Auditor Engine D1:
https://audioengineusa.com/shop/components/d1-24-bit-dacheadphone-amp/
I used this with my PS4 slim prior to getting a receiver with HDMI inputs: https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_awdb_imm_t1_pNPXFb2XYXZDX
I was looking for something similar and came across this the other day.
https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_apa_fabc_kNbWFbHG2D8G0
Would something like this work? J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_fabc_ELuRFb956G8B0?_encoding=UTF8&psc=1
Might be a stupid question and im doing research but could you tell me if SPDIF = Optical... I just bought an adapter but not sure if it will work. Below is the device I bought.
https://www.amazon.com/gp/product/B00BIQER0E/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Would something like this do the trick?
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_fabc_5-UPFb9048YW4
Yeah, I'm sure that would work great, but it looks a bit overkill for my current setup. Anything that's a 5.1 receiver is probably gonna be pricey and I'll want nice speakers to go with them too.
Think I'm just gonna try one of the cheapo hdmi extractors u can nab off amazon for like $25 https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E/ref=sr_1_3?keywords=audio+extractor&qid=1564162667&s=gateway&sr=8-3
Not sure that'd work. Something like this should do the trick though. https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_apa_fab_RgYGFbA381CDX
Get a refurbished Espon 1060 (or equivalent name brand optima, benq, viewsonic, LG, sony, jvc, panasonic) 1080p / 3,000+ lumen projector for about $400.
Build a screen out of four 2"x3"x8' boards with rope guy-lines and metal stakes. Attach the boards using wingnuts, washers and bolts. Use a queen size white sheet for an 8' wide screen (110" diagonal).
Buy a big outdoor speaker with rca input like an Ion Pathfinder for about $150. You'll probably want a $20 hdmi audio extractor to hook up the sound.
This is the one I have.
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_i_TVDFFbJW02D9Q
Hdmi to audio splitter https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E
Or surface BT to bt speakers
Etc.
Could I use something like this?
You'll want a $26 hdmi splitter for the annoying lack of audio out the others are mentioning: https://www.amazon.com/gp/product/B00BIQER0E/
I just use rca-style connectors for that to connect to my outdoor ion blockrocker speaker, but if you still want bluetooth, you'll want a $33 bluetooth transmitter like this: https://www.amazon.com/Bluetooth-Transmitter-Receiver-Knofarm-Simultaneously/dp/B088R8JPD8/
Ideally there would be a single hdmi splitter + bluetooth transmitter device, but I'm not aware of such a thing.
For a screen, just get four 2x3x8 boards, a queen size white sheet and some ropes for guylines. Like this... where the screen is 8' wide. Use bolts and wing nuts so you can disassemble it easily.
I think you may be right so i ordered one of these for it. Do you know if this will solve my problem?
https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E
so the typical way to not need an audio out is to have video source -> AVR -> projector, such that the AVR grabs the audio before sending over just the image to the projector.
but the thing you described exists as well, just search for 'hdmi audio extractor' and you'll find it. you'll then plug your chromecast or whatever to the audio extractor, which will then have an audio out, plus an hdmi out that would go to your projector.
You need an HDMI audio extractor!
I haven't tried this one, it was just the first to come up when I Google it.
Have you looks at an hdmi audio extractor. I run one on my roku and have a yamaha tv audio bar. Works great for me. Also a lot cheaper then a AVR.
https://smile.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_apa_i_xzmiFb4BWYKFM
Cool to see the comparison images... I just got the Epson 1060 refurb myself and didn't know about the audio out. Had to buy an $25 hdmi audio extractor. Ridiculous they don't provide audio out. Although the audio extractor I got is nicer since you can optionally get SPDIF optical audio extracted for 5.1 sound.
Otherwise the Epson 1060 is amazing even as a refurb and I recommend it.
Note the Yaber Y60 outright lies in the title by saying Full HD 1080P when it is 1280x720. And there is absolutely no way it is 5,500 lumens as it claims... probably closer to 400 lumens.
This guy actually measured the lumens of a BenQ vs an amazon cheap projector and the BenQ was nearly 4 times as bright. They have reviewed over 80 projector brands (with actual light meters) and Yaber isn't even mentioned.
Found this from a YouTube video. Looks like it works well: https://www.amazon.com/J-Tech-Digital-Extractor-Converter-JTDAT5CH/dp/B00BIQER0E
I've done this. The best way I've found is to use an hdmi audio extractor, optical cable from the extractor to a cheap dac, then a 3.5mm aux cable from the dac to your PC's line in. You could try an rca to 3.5mm cable directly from the extractor to your PC without the dac, but you'll likely get ground loop interference, which requires a ground loop isolater to fix, which negatively affects sound quality. The dac is only a few bucks more than a ground loop isolater, so you may as well go that route and have better sound quality.
This is pretty much how I do this now, though with an hdmi matrix with audio extraction and a more expensive dac.
J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH) https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_apa_i_inPMDbMPNV94D
Would an hdmi audio extractor and audio mixer solve the problem you have?
> LGP2+
Gotcha, so you'll then need an hdmi splitter/extractor so something like this:
​
I recently bought something like this to stream my NES/SNES mini but haven't yet tried it out. So what this in theory will do is split your HDMI signal to a solid signal which will go to your capture device and then split just the audio to either optical or stereo output. So to go back to 3.5mm you'll need a stereo to 3.5mm adapter as well.
​
You again don't have to buy this specific model but be sure to get a powered splitter! You will want a powered splitter so that you don't get any loss of signal when you split it.
​
Also if you have a sound bar or surround sound system connected to your TV you may be able to plug a 3.5mm jack into there directly disregarding the above option. You may only need an optical to 3.5mm adapter.
An hdmi audio extractor is your best bet.
Skip soundbars btw. Get a decent set of powered speakers and you're set.
I have these and they both work well, currently using the hdmi one
https://www.amazon.com/gp/product/B00BIQER0E
https://www.amazon.com/gp/product/B00FEDHHKE
​
I have an old receiver so I use this mod which actively transcodes new audio formats to something my receiver can handle. I use the SPDIF out but you can use the RCA out. You won't need the mod for stereo but I'll link it anyway.
Issue is the mod doesn't work with USB out, which I prefer for its simplicity and (maybe better?) dac. The first hdmi audio extractor I got wouldn't work right, I had to replug everything in every time I turned my projector on, this one has worked reliably every time
You can use something like this to convert the HDMI audio to something with analog or digital out. I also have an analog to 3.5mm cable for my speakers.
https://www.amazon.com/gp/product/B00BIQER0E/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
I use the one above on my second monitor and Logitech speakers. Makes a great makeshift TV.
yikes you could buy one of these perhaps to get an optical output: https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
Granted I have a PS4 Pro so it uses an Optical Out, but I got my setup to work differently. I run audio cable from my PS4 to a converter box I got on Amazon then into my 'Line In' on my PC via a 3.5mm jack. This allows me to have both sounds at the same time and I can control the levels via my PC.
For the Slim you could use a HDMI audio extractor into a 3.5mm jack into your PC and get a similar result I think. Something like this: https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
From another post I made when someone asked a similar question:
"I used an hdmi audio extractor to do what you're asking for a while. It worked great. You can even get an hdmi switch with audio extraction if you have more than one console."
To further elaborate, you plug the hdmi cable from the switch into the extractor, then another hdmi cable to your monitor. You then use either an optical cable or rca cable (with 3.5mm adapter if necessary) to go to your speakers. Or you could run a cable from the rca to 3.5mm line in port on your PC (the blue one) and get game and PC audio through the same speakers if the speakers are hooked up to the PC.
Is this what I would need?
I use this one for my AppleTV.
https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_cp_api_smsuBbZBB5WMS
You could get an HDMI audio extractor, instead of fussing around with a USB sound card on the PS4. You'll just plug this inline with the HDMI and it outputs either optical or RCA, which you can then put into a mixer.
And then you can use this to combine them:
Interesting. Maybe try this- J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF... https://www.amazon.com/dp/B00BIQER0E/ref=cm_sw_r_sms_awdb_t1_cDpEAbPAQ5RYY
You need an HDMI audio extractor. The receiver you have will not really help in this setup at all.
Yeah that's why I was asking.
Only way I know to do what you are looking is to use a device like this.
In your specific case, you will need to:
- Connect the PS3 to the splitter via HDMI
- Connect your sound device to the L and R channels of the splitter.
- Depending on your sound device, you may need to use something like this 3.5mm Male to 2 RCA Left & Right Audio Female Adapter.
- Connect a HDMI in to DVI out cable from the splitter to your monitor.
Disclaimer: I do not necessarily have any experience with those specific items linked besides the HDMI to DVI cable, I just looked up something and linked it.
HDMI audio extractor will do the trick https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
Yes, you’ll need a CC to play videos on your TV. Google Home device is optional.
You can separately purchase a HDMI audio extractor to separate the digital HDMI audio signal from the CC HDMI output to the TV HDMI digital input. The extractor converts the digital audio portion to a 2 channel analog output (or 5:1 channel analog output) that you can use to plug into your stereo (L-R) receiver or amplifier audio inputs. This configuration allows you to watch videos cast for viewing on your TV while listening the show on your audio system. Here’s an audio extractor example that you can purchase that is listed on Amazon.
I routinely listen to digital radio, podcasts and music on my HDTV audio systems either via TV sound bar/woofer connected to my HDTV using just the CC.
I also listen to the same via my audio system without the HDTV being on through my audio CC that are connected to my audio system.
On occasions, I have video being cast (e.g., fireplace video, scenic photography, family photos, etc.) via CC while casting music via audio CC at the same time.
However the audio CCs are very useful to cast digital audio for listening on analog audio systems throughout the home.
Google Home is helpful in that to can start and control all of this using simple spoken commands and, following setup, without tablets and smartphones.
The main purpose for the CC Ultra is to stream 4K video. Yes, there are a few sources (e.g., NetFlix) that can provide 4K video streams. However you need to first focus on having enough bandwidth from your ISP to support the additional demand for 4K Video streaming; and pending that’s in place you need either hardware your CCs to your modem or have a local Wi-Fi router or router system in place to handle your normal device demands PLUS the heavy additional demands needed for 4K Video streaming. Handling the video resolution is the issue, not speed.
However if your planning to buy a 4K HDTV, have enough bandwidth down from your ISP, have enough WiFi (or hardware using optional adapter), have 4K video streaming source access (note that NetFlix requires the purchase of their more expensive premium plan to be able to use a limited list of 4K video) then you may wish to purchase and use a CC Ultra.
Try an HDMI Extractor from your laptop. Hookup the optical cable with 5.1 pass thru. Then use an HDMI to VGA adapter
Should get what you're looking for.
An HDMI audio extractor should work, the reviews on Amazon of these two look promising:
Not that expensive. For the people that have surround sound headsets already, that extra $27 is a drop in the bucket.
You might want to look into getting some sort of breakout from your HDMI output from your Kodi source for the audio portion, so that you're feeding 5.1 audio to your amp. Right now, your amp and speakers are only being fed 2.0 stereo audio in analog (basically the lowest common denominator of multi-channel audio).
Something like this would allow you to pipe 5.1 audio to your amp, provided it has an HDMI or optical S/PDIF input. Then again, if your TV has HDMI or (more likely) optical (or RCA digital) S/PDIF audio output, you could feed that into your amp for the cost of the cable alone. This all assumes that your amp is capable of accepting some sort of digital audio at all.
All that to say, however, if your amp is HDMI-enabled, you're probably better off configuring it the way it was intended, and use your amp as a signal selector, and run it as Kodi device > amplifier > TV over the best signal type your devices support (HDMI would be best, followed by YPbPr analog RCA connectors, S-Video, and then composite RCA video. For audio, the hierarchy would be HDMI, S/PDIF [Digital RCA or Optical], 6-channel RCA analog, and finally RCA 2-channel analog)]
Based on what you're saying here, I am guessing your amp is only capable of 2-channel RCA audio, in which case, get yourself a new amp, son! (As you, to your credit, say you plan to do.) If that's the case, save up for a nice HDMI-enabled amp (they basically all have HDMI nowadays). I'm partial to Denon, myself, but they can be on the pricey end of the spectrum.
Edit: And to actually answer your question: until you upgrade your granddaddy of an amplifier, you want to set Kodi to 2.0 audio. Also, consider sending the audio straight from the Kodi device straight to the amp. You'd introduce fewer points of failure/interference that way, and perhaps even lower latency; so it'll be easier to keep the audio and video in sync without fiddling with the settings in Kodi (if that's an issue for you, of course).
You can use a device like this to give you audio ports to work with, https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
I use the same device to send out audio to a soundbar so i can listen to music with the tv off.
It sounds like an HDMI audio extractor might allow you to only use one remote.
The simplest option is you can actually output audio by connecting speakers/headphones to your controller. Shown in this video. You can also use bluetooth speakers/headsets if you can manage to pair it.
You have two other options, have a converter that will take the HDMI signal and split the audio and video to separate channels. Such as this
Or use the digital out and either find a speaker that supports it or you can get a converter such as this
Get a HDMI optical sound stripper. Thats what i have on my Wiiu and Skullcandys http://www.amazon.com/gp/product/B00BIQER0E?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
This is the one I use with my chromecast: http://www.amazon.com/gp/product/B00BIQER0E/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I often listen to various CC apps through my Samsung HDTV audio system (soundbar & woofer) by connecting the CC to one of the HDMI ports available on the back of the TV. I also listen to various CC apps using the audio CCs through separate audio amplifiers connected to speakers through the house. One can only group audio CCs together. You cannot group CCs with audio CCs. You also cannot group CCs together. I can also cast and watch video while listening to the video sound over a 5:1 home theater audio system by splitting the digital HDMI off the CC using an HDMI splitter. This is the product I use to accomplish this.
You can cast one PC/Chromebook tab window to a CC, and then another tab window to another CC. However, the end result output would not be synced. I've also tried to use Plex to do the same with the same results. I've haven't tried Kodi yet, so I don't know if it can be done or not.
Frankly, just buying audio Chromecasts and grouping them for audio playback over separate amp/speakers works exceptionally well.
I'd say go with an HDMI audio extractor that has a few options.
Now if all you want is stereo sound, get one of these: RCA to stereo y cable and run into the 3.5mm stereo input on the front of the board. Which by the way is a feature every board should have since EVERYBODY plays an ipod into their sound board.
Anyway, if you want 5.1 into your QU then you need to get a decoder and some RCA to mono 1/4 inch cables into the back of the QU.
This is a much better solution than a ground loop isolator, and it doesn't sacrifice sound quality like a GLI will. I've used this one and it works great.
Popular alternatives to J-Tech Digital Premium Qual...
![J-Tech Digital 4K 60HZ HDMI Audio Extractor Converter SPDIF + 3.5MM Output Supports HDMI 2.0, 18Gpbs Bandwidth, HDCP 2.2, Dolby Digital/DTS Passthrough CEC, HDR10 [JTD18G-H5CH]](https://m.media-amazon.com/images/I/41XE1sKdSlL._SL500_.jpg)
J-Tech Digital 4K 60HZ HDMI Audio Extractor Converter SPDIF + 3.5MM Output Supports HDMI 2.0, 18Gpbs Bandwidth, HDCP 2.2, Dolby Digital/DTS Passthrough CEC, HDR10 [JTD18G-H5CH]
RCA to HDMI,AV to HDMI Converter,ABLEWE 1080P Mini RCA Composite CVBS Video Audio Converter Adapter Supporting PAL/NTSC for TV/PC/ PS3/ STB/Xbox VHS/VCR/Blue-Ray DVD Players
