What is Reddit's opinion of
Kreg K4 Pocket Hole Jig?
From 3.5 billion Reddit comments
By popularity on Reddit, this product is:
14 reviews of this product found across Reddit:
how much do you think a Kreg Pocket-Hole Jig costs?
And then add the screws and gotta either make or buy plugs or it looks like shit. In the long run it all adds up.
Sure, you can get a cheap pocket screws jig but you can also get a cheap doweling jig.
Nope, they're called pocket holes and I used a pocket hole jig. This is the exact one I use.
I was all rough finish outdoor stuff until I got a Kreg Jig. That's how I built this bed frame and headboard. All pockets holes with a Kreg Jig. It's not how the pros do it, but it still looks pretty good. You can pick up everything you need for $100. http://www.amazon.com/Kreg-K4-Pocket-Hole-System/dp/B001DYFISG/ref=sr_1_3?ie=UTF8&qid=1364076316&sr=8-3&keywords=kreg+master+jig
I drilled "pocket holes" using a kreg jig then I wood glued the seam pretty heavily and tightened it up with the screws in the pocket holes. Mine is made out of 3/4" plywood, which has some integrity to it. If yours is out of particle board then pocket holes may not work that well. Really once the wood glue sets that's as strong of a bond as the wood itself but you have to get a tight clamp at the seam during setting which is what the kreg screws helped with.
I use a Kreg k4 jig. It has served me well for many years.
​
https://www.amazon.com/Kreg-K4-Pocket-Hole-System/dp/B001DYFISG
Started woodworking this summer with my wife. Made a couple of Steve Ramsey's BMWs and a lumber cart. Then after seeing [this post](https://www.reddit.com/r/BeginnerWoodWorking/comments/i4ka7h/not_sure_what_to_call_this/) was inspired to make something for our sectional sofa. Thanks to /u/lyellwalker for the inspiration and notes!
We have experience with Fusion360 from doing 3d printing, so we put together a model, exported some cut lists and went shopping! The tabletop and shelf are cut from an IKEA kitchen cabinet set that we got for cheap in their AS-IS section. 1/2" MDF with a nice dark veneer and edge banding, what more can I ask for? The frame is made of 4/4 and 8/4 white oak and assembled with pocket screws using a [kreg k4 jig](https://www.amazon.com/dp/B001DYFISG). The top is attached to the frame using some [z clip table top fasteners from amazon](https://www.amazon.com/dp/B001DSZRDS).
We cut the lumber to size, and modified our jointing sled into a make-shift tapering jig for the legs. Used the kerf of the table saw blade to cut an 1/8th inch dado in the apron pieces to fit the z clips into (didn't get a good picture of that). After sanding 80 -> 150 -> 220, we applied a coat of danish oil, then there coats of satin spray lacquer.
Attached the table and shelf tops, put some sticky felt feet to protect the floor and it's finally done! Took us about 6 days starting with the first cut (design/modeling/shopping happened a couple weeks ago).
We're giving this one a go for a bit, then we'll probably make another one for the other side of the couch... hopefully with some lessons learned from this attempt!
This will make your project much easier.
Looks good. Try using this: Kreg Jig K4 Pocket Hole System www.amazon.com/dp/B001DYFISG/ref=cm_sw_r_other_awd_z9z8wb79TPCTJ
If you do a lot of wood working like building cabinets and stuff this will be your best friend. http://www.amazon.com/Kreg-K4-Pocket-Hole-System/dp/B001DYFISG/ref=sr_1_7?ie=UTF8&qid=1441398517&sr=8-7&keywords=Kreg
its a pocket hole jig, allows you to hide the screws and looks a little more clean. Here's a link
For future builds: http://www.amazon.com/Kreg-K4-Pocket-Hole-System/dp/B001DYFISG
Pocket holes are a great way of fastening boards together like this. This guy does some nice pieces using a pocket hole jig:
http://www.diypete.com/how-to-build-a-farmhouse-style-coffee-table/
Popular alternatives to Kreg K4 Pocket Hole Jig
