What is Reddit's opinion of
Liquid Cement For Plastics 1 oz?
From 3.5 billion Reddit comments
25 reviews of this product found across Reddit:
https://www.amazon.com/gp/product/B0006N6ODS - This is the best adhesive I've found for plastic minis. Great applicator, goes on with great control on the smallest of pieces. Bonds great. Usually easy to find at any hobby store and it lasts for freaking ever. If this won't hold two pieces together you might need green stuff or filler putty to help support the joint or (worst case) some pinning. Check out /r/minipainting for more.
It’s the one I’ve seen recommended highest here on reddit and over on BoardGameGeek:
https://www.amazon.com/dp/B0006N6ODS/ref=cm_sw_r_cp_api_i_bRhOCbWM0HB51
Note the same manufacturer makes this product in a different container without the metal applicator, which I’ve heard makes a world of difference. Model you want is 8872C.
What glue you should use depends on the material the model is made of.
For ABS plastic (most Citadel kits), use a plastic cement. There are several brands and applicators available; I like this one for having an extremely precise applicator.
For PVC or other plastics, resin, or metal, and for bonding two unlike materials, use good ol' cyanoacrylate--super glue.
You would have to be extremely careful, but you might be able to do it using this.
It has a very tiny, needle thin applicator that should allow you to avoid gluing the joint, but as I said you'll want to be REALLY careful. I think you're probably okay if you just handle it gently though, if you'd rather not take the risk.
I highly recommend Testor’s Model Master Liquid Cement for plastic models (looks like a black triangle). It lasts forever and has pretty good control and consistency. Just don’t loose the little metal piece that clears clogs, nothing else will fit...
Model masters liquid cement, its freaking awesome. Yet, the body hanging off the front is heavy, even being propped up for a few hours it seems to want to droop to the floor. Might just go with regular superglue for that part.
From the world of Warhammer I learned about this stuff
Great glue for plastic. I don't know if it will work on the TI plastics but it essentially melts the piece and makes it stick back together. I would try this on that plastic and see.
As others have pointed out, plastic cement will basically weld the pieces together. I use this guy and love it. The long pointy applicator makes it really easy to get as much cement as you need exactly where you want it on tiny things like hands and the edges of armor pieces. Plus, with plastic cement, a little bit goes a long way.
well imo, Testor's Liquid Cement For Plastics is the best thing out there for assembling plastic models. Stuff only works on plastic so if you get it on your hands or anything else, you can wipe it off and it's fine. Also it gives you some time to adjust the model unlike super glue. http://www.amazon.com/Testor-Corp-Liquid-Cement-Plastics/dp/B0006N6ODS
Subtle but important difference: The Model Masters version has a metal applicator needle which will last you significantly longer than the plastic applicator that comes in the one you linked.
I had one of the Model Masters last me for 7 years until a friend lost it. By comparison, I had 3 of the other ones clog within 6 months each.
Paints: Most GW paints are fantastic, there are a few exceptions here and there, but you can easily supplement your GW paints with alternatives from Vallejo, Army Painter and P3. This usually comes down to personal taste for most people.
http://www.thewarstore.com/vallejo-game-color-paint.html
http://privateerpress.com/formula-p3/paints
https://www.thearmypainter.com/
Brushes: GW brushes are a joke, they're the same price as really nice brushes like the Windsor Newton series. If you're going to spend $15-$20(US) on a single brush, get something nice not the GW crap.
Hobby Tools: GW's hobby tools are fine. It's hard to mess up simple metal tools. That being said, they're also 3-4x what they should cost. A trip to your local hardware store should net you the same or better products for about 1/4 of what GW wants to charge!
Glue: I hate GW glues personally. I've never had a good experience with them. For plastic assembly I prefer Model Masters and for Super glue I prefer the Bob Smith Industries gap filler medium.
http://www.bsi-inc.com/hobby/insta_cure_plus.html. I would be shocked if you can't find this in any number of hobby/craft stores. Worst case scenario, you can get it from Amazon with a couple of days wait time.
https://www.amazon.com/Liquid-Cement-Plastics-1-oz/dp/B0006N6ODS. Best plastic glue around, the metal applicator tip allows for extremely precise application of glue.
Primer: Everyone has different opinions on primer. If you're just getting back into the game I suggest going with GW primer. It rarely has issues and although extremely pricy, it gives an excellent base coat. That being said, any dollar store matte primer will do the trick.
**Once you're back into things, I highly suggest you look at an airbrush. The miniatures world has changed a LOT in the last 20 years, and now airbrushes are cheap and many paints are already formulated for use with them!
My plastic glue. I mostly assemble models with this now. Just a dab will do you.
​
My superglue. This stuff is amazing. Changed my hobby. It's thick and fairly easy to keep where you want and dispense about how much you need. They used to have a 1 ounce container, but Amazon just has the 2 ounce right now. A massive upgrade over the thin watery stuff I was using before.
Loctite Ultragel control is also good, but the applicator you have to be careful with, it can be hard to control.
Just fyi, that glue is the worst on the market. Get the Model Masters black triangle... best stuff out there for plastic on plastic assembly.
I started with Testors Gel, then moved to Testors Liquid, as you have there. While you can get good results with either of these, there are better choices.
I have since moved on to Model Master Liquid Cement for Plastic Models in the black container with the needle applicator. The needle tube makes it really easy to be very precise *exactly* where you place the glue - this is super helpful for tiny pieces. I use it for everything: Warhammer models, Gundam kits, scale armor, scale ships (very tiny pieces!), everything. I am never going back to brush-on liquid cement. Very highly recommended.
https://www.amazon.com/Liquid-Cement-Plastics-1-oz/dp/B0006N6ODS
Just my thoughts on gluing these models. I have built 4 of these HMM models (Shield Liger, Blade Liger Bang Ver. Pic I glue all, non-moving pieces, and the reason is because, when you don't do that, the models are VERY fragile. I built the first one (the Shield Liger) without glue, and kept having issues where parts would fall off while trying to pose. I eventually stripped it all down and rebuilt it with glue because of that. I like to pose these models because there is so much articulation to them, that posing them is a joy. Using glue basically makes them an action figure.
​
This is the "glue" I use: Model Master - Liquid Cement for Plastic Models. This stuff basically fuses the plastic to plastic, so that's why glue is in parenthesis, so be VERY careful. I like that it has a needle like tube that allows you to use a very minimal amount, and 1 bottle lasts for many builds. Just my 2 cents from a guy who actively builds with glue.
I use Testors. Like Citadel, they have a thick and thin. https://www.amazon.com/dp/B0006N6ODS/ref=sspa_dk_detail_7?psc=1&pd_rd_i=B0006N6ODS&pd_rd_wg=uEoTd&pd_rd_r=SN0TRFKKTTYPKBNC0K7H&pd_rd_w=53CQo&smid=A2P5I4NW0QQAX1
I currently use the testors black bottle glue. It's a very thin product and is easily applied in small amounts through a very thin steel tube applicator tip. The red twin pack glue is a thick gel that is a bit more unwieldy to apply. It's been years since i've used the thick gel type and I recomend using the black bottle stuff. It's the type of glue that will melt the plastic and create a permanent bond.
Reading the packaging a little closer it looks like the black bottle now uses a plastic applicator tip. This model master version (still Testors) has the metal tip, which I like. https://www.amazon.com/dp/B0006N6ODS/ref=psdc_2236128011_t1_B00005CA7S
Games Workshop has a glue that is the same as the black bottle Testors/model master but the the GW bottle isn't as good and the applicator tube can pull out of the bottle on you if you're not careful.
I was able to assemble my entire core set plus 11/12 expansions with these items:
https://www.amazon.com/gp/product/B0006N6ODS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
and
https://www.amazon.com/gp/product/B01D1JYXKO/ref=oh_aui_detailpage_o06_?ie=UTF8&psc=1
The clippers are still going strong and the files work nicely. I have no mold lines or excess glue on my minis and I filled in some gaps with green stuff:
You can usually find it a bit cheaper. Hopefully, that helps!
https://www.amazon.com/Liquid-Cement-Plastics-1-oz/dp/B0006N6ODS
This stuff is what I use
I don't know about the bits but I would suggest this over GW plastic glue:
I use http://www.amazon.com/Testor-Corp-Liquid-Cement-Plastics/dp/B0006N6ODS when I need to use glue. I still have a ton of the stuff left over from my 40k days
I like this glue because of the tiny applicator, it's like a syringe needle. But you have to scrape any paint or finish off the mating surfaces. Superglue works for most everything else, but apply with a toothpick, and put on less than you think you'll need.
For details, check out the various photo-etch kits available. You can get generic ones like this seat belt hardware or radio faces, or ones specific to a model kit, like this Camaro upgrade kit.
No Amazon considers it an add on item and won't let me buy it alone. Has to be bought with something else making the order more than 25. That's why I was wondering if it matters what brand or if I could pick another one on there like Liquid Cement For Plastics 1 oz https://www.amazon.com/dp/B0006N6ODS/ref=cm_sw_r_cp_api_Bl5FzbVNY0BDB
Try this stuff. I've been using this since I was like 10(25 years) and you cannot go wrong. At best the GW stuff is inconsistent, but most people I know who have tried it said it sucked and I've been forced to use it a few times and hated every second of it. I want to turn that quote from Bohemian Rhapsody on it's head here... if you think that stuff is fast your wife must LOOOOVE you!
I've glued stuff with it, come back the next day to soft spots on the glue area, or pieces fallen off. Takes forever to dry compared to model masters and they give you the same price for 1/3 more glue.
Edit... thought I was replying to another post, but I do answer your question, so just minor changes. Some parts may not makes sense
Popular alternatives to Liquid Cement For Plastics ...
