What is Reddit's opinion of
Loctek Monitor Mount Heavy Duty Gas Spring Swing Monitor Arm Desk Mount Stand Fit 10-34 inches Monitor 13.2-33 lbs Weight Capacity?
From 3.5 billion Reddit comments
By popularity on Reddit, this product is:
51 reviews of this product found across Reddit:
I have tried using my AmazonBasics arm on CRG9; it don't work.
the weight limit is really close already and plus I add couple stuff on top of the monitor. So that might be the reason why or maybe I just lost the quality control on the amazon basica arm. Too many factors
but either way officially CRG9 monitor IS over the weight amazon arm supports.
I got Loctek D7L for $130 from Amazon(https://www.amazon.com/Loctek-Monitor-Spring-Weighting-13-2-33/dp/B01BXP9LT6/ref=sr_1_3) which supports up to 33lbs. this one holds the CRG9 but I did have to tighten the 'increase tension' on one of the parts to make the monitor not keep sagging so on that one part there is no extra room to adjust; I had to tighten it all the way.
Thanks! My desk was built by a friend and he used some steel framing under the block so I needed an arm that would clear 4+ inches so I found the Loctek Monitor Mount. It has a huge clamp that can clear pretty much any desk up to 4.7in
Loctek Monitor Mount Heavy Duty Gas Spring Swing Monitor Arm Desk Mount Stand Fits for 10-34 inches Monitor Weighting 13.2-33 lbs - D7L https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apip_wnxZ1FGIyhrBu Love this arm. More than strong enough for this monitor. Gives u a ton more desk space!
For your first question, fancy zone app is over rated, IMO. If I needed to play a game in the centre, I’d have to change the game settings to windowed + borderless mode to the size I need then utilize whatever space I need. I don’t think the app was meant for games anyways.
Also IMO, I think you have a ton of room on your desk for the g9. If you have to : mount for g9
You’ll never know ;). I say enjoy what you got right now. Who know what tomorrow will bring.
For your first question, fancy zone app is over rated, IMO. If I needed to play a game in the centre, I’d have to change the game settings to windowed + borderless mode to the size I need then utilize whatever space I need. I don’t think the app was meant for games anyways.
Also IMO, I think you have a ton of room on your desk for the g9. If you have to : mount for g9
You’ll never know ;). I say enjoy what you got right now. Who know what tomorrow will bring.
Loctek Monitor Mount Heavy Duty Gas Spring Swing Monitor Arm Desk Mount Stand Fits for 10-34 inches Monitor Weighting 13.2-33 lbs - D7L https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apa_i_ad4pDbTT08MTK
I have been using this over 6 months now. Works great. If you just want a wall mount literally like any TV mount that can hold at least 23lbs and matches the bolt pattern will work.
Yeah I think getting a swing arm is the play... what do you think about this one?
Loctek Monitor Mount Heavy Duty Gas Spring Swing Monitor Arm Desk Mount Stand Fits for 10"-34" Monitor Weighting 13.2-33 lbs - D7L https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apa_i_ScS4CbP81WNMF
I haven't bought this yet, but I have the same issue with a 43in LG monitor. This one is what I saw recommended before
I have it mounted on one of my desk's grommets. The new mount itself (Loctek) has a smaller footprint on my desk, compared to the standard mount that came from the manufacturer. Once I purchase a house for myself, I will have it mounted on the wall.
https://www.amazon.com/gp/product/B01BXP9LT6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I use this for my AW monitor.
Loctek Monitor Mount Heavy Duty Gas Spring Swing Monitor Arm Desk Mount Stand Fits for 10"-34" Monitor Weighting 13.2-33 lbs - D7L
I'm using this one right here for my 49"
And this one here for my 21"
(I realize that I could have picked a lighter weight one but I originally bought it for the 49")
Strong like Ox. Ugly, like ex.
Loctek Monitor Mount Heavy Duty... https://www.amazon.com/dp/B01BXP9LT6?ref=ppx_pop_mob_ap_share
It's this one right here. It was also the only arm on Amazon that I've seen hold up this beast lol.
I bought one on Amazon that was rated for 33 lbs. Also read reviews looking for people who used it with my monitor.
https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apa_glt_fabc_4KV2Y7M74MTYZ3KQH184
Sure, here you go!
​
​
Gpu: 1080.
​
I did not know as much as I do know about computers when I got my GPU. My monitor at that time was way smaller and easier to drive. This monitor with my GPU does ok, frame rate per game varies and depends of the settings. I would not drive this monitor with a 1080, planning to get the 3080 soon
Sure! I believe is this one:
​
Hold pretty, pretty well
I designed and built the desk myself, the arm is loctek heavy duty, I bought it on Amazon https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_other_apa_i_fNizEbH97E85Y
I've got this arm on my wish list. Seems to support it and others seem to have been using it: https://www.amazon.ca/dp/B01BXP9LT6/
33lbs (14kg) support. Better than $400, that's for sure.
Many of the smaller, cheaper mounts will drop from the weight. I went with this and it works great, should be able to hold up to a 49inch monitor.
Loctek Monitor Mount Heavy Duty... https://www.amazon.com/dp/B01BXP9LT6?ref=ppx_pop_mob_ap_share
At the time of the post I used this monitor mount. I’ve since changed which monitors are on this desk and now use this mount.
Here is the only stand that I found that can support such screen, a beast !
It appears to be a Loctek monitor arm.
I use this with my CRG9 and it holds just fine. Slightly less curve but I've seen others comment that it works for them in other threads https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apa_i_T989FbQKTV5Z6?_encoding=UTF8&psc=1
I use this bad boy for my CRG49 and it works just fine. Big fan of it https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_apa_i_T989FbQKTV5Z6?_encoding=UTF8&psc=1
I happen to have the same one ;)
https://www.amazon.com/gp/product/B01BXP9LT6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
It's probably fine, but with these monitors it's always a good practice to slightly overspec on the max weight. I went with this Loctek that's priced slightly higher at ~$100 and I have no issues on my 34":
https://www.amazon.com/gp/product/B01BXP9LT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This should be up to the task, I have one and its beefy as hell. Supports up to 33lbs which is 2lbs more than the G9:
https://www.amazon.com/gp/product/B01BXP9LT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
Hope this helps!
I use the https://www.amazon.com/Loctek-Monitor-Spring-Weighting-13-2-33/dp/B01BXP9LT6 for my 43 inch and it works perfectly! Looks like it should support the 49 inch as well weight wise.
I use the Loctek one for my Asus 34" Ultrawide. It's actually slightly cheaper right now than Amazon one but the build quality is a little bit better, and it is rated for a higher total weight.
https://www.amazon.com/gp/product/B01BXP9LT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Loctek heavy duty monitor arm, found on Amazon.
https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_other_apa_i_fNizEbH97E85Y
desk to center.
I ended up going with this more expensive Loctek
Oh I see, lol. I use this one
https://www.amazon.com/dp/B01BXP9LT6/ref=cm_sw_r_cp_api_upY2BbQQQY7CJ
You just have to make sure to tighten the tilt bolt REALLY TIGHT. This one works great for me though.
It’s the Loctek heavy duty mount: https://www.amazon.com/dp/B01BXP9LT6?ref=yo_pop_ma_swf
It's the Loctek D7L, which supports a max of 33 lbs. I got lucky, I bought it well before the monitor, and this monitor is 33 lbs.
Loctek D7L Heavy Duty Gas Spring Swing Monitor Arm Desk Stand
https://www.amazon.com/gp/product/B01BXP9LT6/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Holds the 38" nicely, the display weighs around 17 lbs.
I deleted my previous statement as based off just weight alone this wouldn't work. Size wise yes, weight wise no. all you need in a mount is for it to have the right vesa size, and the correct amount of weight that can be held for each monitor. since you want to try and mount 2 monitors, of different sizes, you need to worry about the size of each "mount" and each mount's supported "weight" this one only holds 22 pounds. If the AW is really 26 I wouldn't do it. It probably will sag. and in general not rated for the extra 4 pounds. I still suggest mounting each monitor on it's own. Or atleast mounting the AW34 on it's own mount, and then the other monitors on their own dual/single mounts. or triple mounts, however many you desire down the road.
It won't work. I checked the weight of the AW3418DW which claims on dells site to be like 26 pounds? That holds up to 22 pounds for each monitor mount. I wouldn't risk it* however I know some people have used 22 pound rated mounts for it before. Just not me personally.
Most dual mount's even up to x2 34" monitors is only rated at 22 pounds each. 4 extra pounds is allot and if it's not rated i wouldn't do it. Anyway's here is a great option for the AW3418DW ONLY https://www.amazon.com/Loctek-Monitor-Spring-Weighting-13-2-33/dp/B01BXP9LT6/ref=sr_1_sc_1?s=electronics&ie=UTF8&qid=1534448153&sr=1-1-spell&keywords=loctek+monnitor+mount+34%22 I know allot of people mentioned it and similar to it. holds up to 33 pounds and is pretty highly adjustable.
Popular alternatives to Loctek Monitor Mount Heavy ...
VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, Black, STAND-V002
Amazon Basics Single Monitor Stand, Lift Engine Arm Mount, Black
