What is Reddit's opinion of MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black?

From 3.5 billion Reddit comments

Could take a sewing needle or something about the same thickness and punch them out..

Edit: Failing that these look like a good match, just check the sizes: https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W

I've never painted something like this before but the thought I just had was some kind of putty on the bottom side that fills the holes. Like 3d masking tape. Paint the top then peel the bottom layer off and you should have really nice clean holes.

Not OP. But this is the one that I've bought and this has been recommended to me from this sub.

You will have to do some modifications by cutting into it and redoing some of the magnetic strips. But it fits pretty well on the back of the NR200 and definitely gets the job done.

This is what I have saved on my Amazon that I got from somebody else on this sub.

MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_glt_fabc_ENHSRZEYB9SP48NC3J87?_encoding=UTF8&psc=1

You definitely can mount them externally! If you are thinking of mounting them as intake fans, I would definitely invest in a magnetic dust filter to place on the inside of the case, as this case has a design flaw where dust can easily enter the system through the bottom if you don't use a filter such as the one I mentioned, which can lead to your beautiful system getting dirty very quickly.

I'm not sure how Razer's design engineers have overlooked such a significant entry point for dust and critters, but as long as you use something similar to what I mentioned to keep foreign particles out and clean it every few weeks or so, you should have no issues with mounting the fans below the case. Hope this helps!

You might want to stick a magnetic filter on the outside of the back vent. With negative case pressure it'll suck in a lot of air/dust from there.
https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W
There's a shitload to choose from that one wont fit.

Moko brand from amazon

https://www.amazon.co.uk/MoKo-Filter-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/ref=asc_df_B07R4WWX4W/?tag=googshopuk-21&linkCode=df0&hvadid=205227241339&hvpos=&hvnetw=g&hvrand=6359861814382828621&hvpone=&hvptwo=&hvq...

MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_apan_glt_i_DEX12NQWF9XF1JJ78HZ2?_encoding=UTF8&psc=1

This should work ✌

I don't know what dims you need but just Google/Amazon magnetic dust filter pc - there's so many available, you just need to find the dims you need.

Eg: https://www.amazon.co.uk/MoKo-Filter-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/ref=asc_df_B07R4WWX4W/?tag=googshopuk-21&linkCode=df0&hvadid=205227241339&hvpos=&hvnetw=g&hvrand=7388204640714595147&hvpone=&hvptwo=&hvq...

yeah c14 would work nicely for you considering you have a vented side panel i’m rocking a glass side panel so that wouldn’t work well for me personally lol.

i haven’t seen any specifically made dust filters for the rear but saw a couple posts of ppl buying this one and cutting it to size

MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_glt_fabc_P15SJXGNF3YPP3V5Q6B1?_encoding=UTF8&psc=1

Do you vape or place your PC in the same room with an open kitchen?

Lancool 2 Mesh seems a pretty good option too(especially considering the number/quality of fans preinstalled compare to 4000d airflow), just wished they included an optional front dust filter for people with an open kitchen like me...

Do you have any experience with one of these after-market grills/filter by any chance?

https://www.amazon.ca/MoKo-Filter-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/ref=zg\_bs\_3312774011\_3?\_encoding=UTF8&psc=1&refRID=M1XGXJTBBWJ2TK4GXNZM

I have that case too, and did a similar modification on a previous case...a slimline gateway office PC from like, oof, 15 years ago now that had a similar problem. GPU slot right at the very top, so the fan on the side of the card was right up against the top panel.

I was in college and my roommate was the supervisor for the engineering shop, so we used a mill to drill a precise grid of holes for it.

On my current GD09 I don't have any demanding hardware, and just 3x 120mm intakes (+1 120mm intake on the PSU) with no fans actually exhausting. The 80mm spots on the back are just open.

Anyway, you can totally cut some extra holes in yours. How precise your grid ends up being is really up to your tools and your patience, but the air won't care how neat it is as long as there's space.

You could also just cut a big rectangle out of the top of the case and slap one of these over it.

MoKo 120 x 240 mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.de/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_i_8BHRR8F83GKP9SD103FP?_encoding=UTF8&psc=1

The magnets have a sticker so just carefully peel those off, trim with scissors and there ya go.

I'm building a PC for a community-run bicycle workshop space and its grimey, greasy, and dusty. I need a fan filter that's cleanable or replaceable. I'm looking at the magnetic fan filters on amazon,like this one, but I can't tell if they're are fine enough to work. Any suggestions?

MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_glt_fabc_A3221K0PJJ5WAQJYFEGT?_encoding=UTF8&psc=1

Here is a magnetic dust filter that would cover this area

Ahh yeah that little change actually made a significant difference for me. I dropped 5-8c off my CPU but traded +1-2 on GPU which was fine by me. I ordered this filter on Amazon and I was able to cut it with scissors and fit a strip of magnet off the part I wasn’t using. MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_glt_fabc_1BDCR36NV68NGWJYKJXZ?_encoding=UTF8&psc=1

Would something like these mesh filters work? Maybe cut them to size to block off any openings? Air will still be able to get though and you’ll be able to seal off entryways.

I discovered them after watching this great build video. Here you go https://www.amazon.com/gp/product/B07R4WWX4W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07R4WWX4W&linkCode=as2&tag=mflannigan78-20&linkId=8e002cf98c84edc8d70707878f36ad53

just get a magnetic one. like this

not sure what size you need but they come in all sizes.

I have a similar build, but a 2600 instead of 3600. Same video card and all.

1) Get aftermarket cooler. check the guide but I found Noctua NH-U9S keeps CPU well below 65C at full load.

2) change out the feet. to get air flowing, change the feet and prop up the case. This is the hardest because there are no good suggetions. Maybe an inch high feet. Here are case filters for that section that work great. MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_i_x4q7DbY09RD2X

3) Slim fans work better to put air around than the standard 120s on the bottom.

4) air flow of the case is follows:

top: in out

cpu: point to exhaust out the back. remove the fan on the back

bottom: in in

maybe a front fan but I have been fine without it. You will want to test it out and see how it works with your setup.

5) fans are all set to 40% idle and are pretty quiet. Only when gaming does it sound loud obviously.

6) Video card still gets hot. I havent played too much with it yet.

They linked to this in the picture captions: https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W

You could sandwich the filter between the rad and fan or put a dual filter behind the rad. Slightly reduced airflow but will keep your pc nice and clean

MoKo 120 x 240mm Dust Filter for Computer Cooler Fan, [2 Pack] Magnetic Frame PC Fan Dust Mesh PC Cooler Filter Dustproof PVC Cover Computer Fan Grills - Black https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_r_cp_api_i_wdCKFb6ZD6RZM

120mm Computer Fan Filter Grills with Screws, Ultra Fine Aluminum Mesh, Black Color - 4 Pack https://www.amazon.com/dp/B07FYY6641/ref=cm_sw_r_cp_api_i_ddCKFbEKYB0MK

People have bought these and just cut them to size

https://imgur.com/a/8u1pCSh So similar yet so different haha. 3700x, 1080ti, 16GB RAM. I cut myself my own filter for the rear intake using this https://www.amazon.co.uk/gp/product/B07R4WWX4W/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 (Ran it for a few days without and got very dusty fast)

 

^Item Info | Bot Info | Trigger

You could probably use something like this: https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/

Its from Amazon. I just had to cut it to size and stick back the magnet.

https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W

Its from Amazon. I just had to cut it to size and stick back the magnet. https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W

https://www.amazon.co.uk/MoKo-Filter-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/

You have to DIY it yourself. Its easy. Take the dimensions and get something like this.

​

https://www.amazon.ca/MoKo-Filter-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/ref=sr_1_5?dchild=1&keywords=mesh+filter&qid=1627177559&sr=8-5

​

Im still in the process of doing it myself. Im rocking it without the front panel right now though. Big difference.

Ah, found it, thanks! https://www.amazon.com/dp/B07R4WWX4W/ref=cm_sw_em_r_mt_dp_7VWY5SWW39Z29FXDPHDN

Any dust filter will do.

For example: https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W/ref=sr\_1\_3?dchild=1&keywords=moko+dust&qid=1623793364&sr=8-3

It's a dust filter.

I was thinking something like this, if you can find it in the right size and can figure how to fix it in place it would look pretty clean.

https://www.amazon.co.uk/dp/B07R4WWX4W/ref=cm_sw_r_cp_awdb_btf_t1_GtvHFbVKBMZ3K

Dust is annoying but can be cleaned out later, but I'd worry about foreign objects. Large dust bunnies, clumps of pet hair, bits of loose trash, bugs, and curious pets or children can break the front fans.

Keep your PC on a table and off the floor to reduce the chances for accidents.

For utmost safety, I would hop on Amazon and find a large magnetic dust filter like this or this that covers all of your intake fans, ideally one that has Prime two-day shipping. Having fans exposed to the world is OK for short periods on a test bench but not a good idea for daily operation.

https://www.amazon.com/MoKo-120240mm-Computer-Magnetic-Dustproof/dp/B07R4WWX4W put something like these over them

Price History

• MoKo 120 * 240mm Dust Filter for Computer Cooler Fan, &nbsp; ^<em>PureLink</em>
  CamelCamelCamel - [Info] │ Keepa - [Info]

Call the Bishop, these prices are sinful.
^(Info) ^| [^(Developer)](/user/The_White_Light) ^| [^(Inquiries)](/message/compose?to=The_White_Light&subject=PriceKnight+Inquiry) ^| ^(Support Me!) ^| [^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2Fbapcsalescanada%2Fcomments%2Fdjy92b%2Fcase_phanteks_eclipse_p300_blackred_atx_tempered%2Ff4b50gc%2F%0D%0A%0D%0A___%0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)