This product was mentioned in
with an average of
I can’t imagine it’s getting that hot with the way all other temps are doing.
You will be able to get all the fans powered using the power hub it comes with using some fan splitters. Ideally no more than two fans per port. The rgb hub it comes with will power the rgb on six fans but I’m not aware of any splitters for this and wouldn’t want to use them anyway as you won’t have individual control of lighting. If you’re motherboard has at least 3 usb 3.0 ports you can just plug in another rgb hub and power the rest of your lights. If you only have two like mine you’ll have get something like this to give you some extra 3.0 ports for your hubs. Motherboard 9pin USB Header to 2 Male Extension Cable Card 9-Pin HUB USB 2.0 9 pin Connector Port Splitter [link]
Also keep in mind when using the rgb hubs you may run into problems if using different type fans on the same hub. Not on the power hubs just the rgb hubs. I ran into this problem that’s why I ended up just buying all 10 QLs
I have three things that need a 9 pin USB for power (Bluetooth/wifi card, aio pump, front panel usb). My motherboard has two 9 pin headers.
Should I get something like this or is there a better solution?
USB 3 is a 20 pin header, USB 2 is the 9 pin header. You'll need either a USB 2 9 pin splitter, or USB 3 9 pin male to 20 pin female converter.
USB 2 to 3 converter: [link]
Just need something like this:
In mATX form factor that might be a bit tricky but maybe something like this could work, in a usb 3.1 variant of course
Perhaps something like this?