What is Reddit's opinion of Mount-It! Triple Monitor Mount | Desk Stand with USB and Audio Ports | 3 Counter-Balanced Gas Spring Height Adjustable Arms for Three 24 27 30 32 Inch VESA Screens | C-Clamp and Grommet Bases Included?

From 3.5 billion Reddit comments

Triple Monitor Mount I had this monitor mount back when I had the Huion GT-220. The other arm and middle mount carried 25” monitors. It was great cause I could pull the huion closer and lower to me if I needed to draw and it could be angled to my preference. When I was done, just push it back up and it was a third monitor again!

Similar to my set up, I moved from two 24" 60Hz 1080p monitors to a 1440p 144Hz 27" center, with the other two on the sides. Then upgraded the two on the sides also to 1440p 144Hz, 27" IPS monitors. A huge improvement. I used a triple mount stand though.

I got it about 2 years ago and having the vertical 27" on either side of the horizontal 27" was very useful. And having the two side monitors on gas cylinder arms was definitely better than the fixed arms.

https://www.amazon.ca/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP/ref=pd_vtp_107_3/139-9556759-6931568?_encoding=UTF8&pd_rd_i=B06X9D7JWP&pd_rd_r=8c6b18f9-41a5-4811-b1e9-0cd856e362fc&pd_rd_w=Lqppt&pd_rd_wg=Rd3ga&pf_r...

You can do that with pretty much any monitor that has VESA mounting support if you get VESA stands for them.

This one is an example of what I mean, pretty much every modern monitor supports VESA mounting but make sure to check if you go this route, just to be sure.

ive been using this one for almost 5 years

https://www.amazon.com/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP/ref=sr\_1\_1\_sspa?keywords=3+monitor+stand&qid=1660016454&sprefix=3+monitor%2Caps%2C92&sr=8-1-spons&psc=1&smid=A1Q5TXAPOS7WLS&spLa=ZW5jcnlwdGVk...

• wallpaper
• put some cool shit on those shelves, whatever you're into
• center that mouse pad, its weird with the keyboard half way off it
• get one of these 3 way monitor arm mounts to free up some room on that desk, it looks a bit small for 3 monitors
• stand or hook for the headset

I recommended this triple monitor mount to another redditor looking for one. I had this one on my GT220 and it was great! Able to swivel and move around to my needs. I could bring it up to act as a second monitor and bring it down and towards me as well as tilt it when I needed to draw. I believe they make single and double mounts if triple is too much

I couldn’t find a mount that all three would swivel easily but eventually landed on this and it can be done in 2 different ways,

Mount-It! Triple Monitor Mount | Desk Stand with USB and Audio Ports | 3 Counter-Balanced Gas Spring Height Adjustable Arms for Three 24 27 30 32 Inch VESA Screens | C-Clamp and Grommet Bases Included https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_cp_api_glt_fabc_CG3RBMQZ4BZJZV683K0R

1a. Raise middle monitor to height where lower arms can swivel underneath corners.

1b. Swivel two sides around 180, supporting arms and all.

1c. Swivel center monitor around and lower to desired height. Set sides to match.

2a. Raise center, swivel 180, lower to desired point.

2b. Leave arms where they are (north stays north south stays south), but maneuver arms to flip screens 180, then readjust monitor layout in display settings.

I do #1, both work. Cord management is actually more difficult with #2.

Mount-It! Triple Monitor Mount | Desk Stand with USB and Audio Ports | 3 Counter-Balanced Gas Spring Height Adjustable Arms for Three 24 27 30 32 Inch VESA Screens | C-Clamp and Grommet Bases Included https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_cp_api_glt_fabc_35DBVPQMFJY8B2H0CKWF?_encoding=UTF8&psc=1

Works well, wouldn’t advise pushing the weight limits on the outside monitors, though.

I’ve gone through several styles and brands recently. Wali is was the best quality out of the cheaper side of Amazon in my opinion. Pay attention to the weight limits and make sure you a few below it. It’s the tilt joint that will get you. This three arm was recommended to me and has a few extra features.

I got this one from amazon.

https://www.amazon.ca/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP

It says up to 32". I mount a 32 a two 24, and i don't see why I couldn't mount your setup. If they were all 34" I don't think the side arms would reach that far out, but two 27s should be no problem.

It is heavy dudy. I once had an old heavy 22" acer, the ones with the built in psu, and and it was able to hold it. It has adjustment for the weight of your monitor and cable management shrouds. The usb port is crap though I cut mine off.

What about using a 3 arm bracket like this. The only thing is I can not tell if the 27 would be able to move up high enough for the side arm to swing under it to move into the middle. Also it mounts to a desk instead of the wall.

​

If you do go with separate wall mounts I don't see being able to use the same stud if you want them to all be level with each other. And mounting on separate studs means you wont be able to get the 32" into the center unless you can get a longer reaching arm mount.

I use this one in a side by side configuration with a 32" and 2 27" monitors on either side.

I found this - Mount-It! Triple Monitor Mount with USB Port, Height Adjustable 3 Monitor Arm Desk Stand for 24 27 30 32 Inch LED LCD Displays (MI-2753) https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_cp_api_i_EVwCCb714VXX0

Seems like a lot of weight for one anchor point.

Mount: https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_cp_apa_i_GN3cDb07FP85Y

10/10 would buy again. Very sturdy and easier to set up with 2 people but I managed on my own. And it supports all 3 27 inch monitors: https://www.bestbuy.com/site/dell-27-led-qhd-g-sync-monitor-black/5293502.p?skuId=5293502

Mount-It! Triple Monitor Mount |... https://www.amazon.com/dp/B06X9D7JWP?ref=ppx_pop_mob_ap_share

I use this one for 2 27" and 1 34". Works great!

Mount-It! Triple Monitor Mount |... https://www.amazon.com/dp/B06X9D7JWP?ref=ppx_pop_mob_ap_share

I got this one. Believe it comes in a dual. It looked the most flexible for the money. Been almost 2 years now, and no complaints.

https://www.amazon.com/dp/B06X9D7JWP?ref=ppx_pop_mob_ap_share

I just set up a triple monitor mount from mount-it. Works great for my 3 27" screens

https://www.amazon.com/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP

For the 3 monitors I have this:

https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_cp_apa_glt_fabc_HDTXYV2DHAVS04PW7ZPC

Then for the surface, I just used the arm from this:

https://www.amazon.com/dp/B085Y3XT5Z/ref=cm_sw_r_cp_apa_glt_fabc_G6E88N85QBKG8GQ1XY27?_encoding=UTF8&psc=1

To get the surface to mount to it, I used sugru to stick a tablet mount to a spare mounting bracket I had.

I love this mount, and will def order the brand again, it was cheap, and really sturdy.

Deal link: Amazon

NOTE: Are you looking for discounts on a specific product? Search for the product in our official Discord Server! We are gearing up for Black Friday and Cyber Monday! Grab the deals before anyone else! Join our Discord Server to get real-time notifications on all deals. We have category-wise Discord channels. Disclaimer: Some deal links on this sub may be affiliated

ALL 3 MONITORS: Dell 27" WQHD 144Hz 1ms GTG TN LED G-SYNC Gaming Monitor

MONITOR MOUNT: Mount-It Adjustable Triple Monitor Mount With USB

ALL 3 MONITORS: Dell 27" WQHD 144Hz 1ms GTG TN LED G-SYNC Gaming Monitor

MONITOR MOUNT: Mount-It Adjustable Triple Monitor Mount With USB

Try this one.

​

https://www.amazon.com/gp/product/B06X9D7JWP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I have this one for my triple setup and it works great. https://www.amazon.com/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP

Here it is on Amazon

I have been very happy with it so far.

SimLabs isn't taking orders until at least the 11th.

I have a few dual and triple display that use gas spring arms and I like them a lot.
This is the triple that I have. Maybe see if you can find one similar on your regions Amazon. A lot of products like this seem to be white labelled anyway.
https://www.amazon.com/gp/product/B06X9D7JWP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Another option to consider is this company I just came across - https://simracecomponents.com/?lang=en&s=vesa

I got it from amazon here:

https://www.amazon.com/gp/product/B06X9D7JWP/

Sure! I got it from amazon here: https://www.amazon.com/gp/product/B06X9D7JWP/

Sure, it's this one from MountIt

https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_em_apa_i_2bjXDbEFW9P3D

Looks like it got even cheaper than when I bought it.

https://www.amazon.com/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP

This?

This would probably solve your problem

https://www.amazon.com/dp/B06X9D7JWP/ref=cm_sw_r_cp_apa_i_talcBbPQA6284

This is the desk mounted set up I use for my three 27" monitors. https://www.amazon.com/Mount-Monitor-Adjustable-Displays-MI-2753/dp/B06X9D7JWP/ref=sr_1_15?ie=UTF8&qid=1526565101&sr=8-15&keywords=triple+monitor+desk+mount