Try the custom AI to help you find products that Reddit loves.
These are the ones that I use and yes it is true the peg hole doesn’t fit every black series figure but the trick is to just get a pack of putty use a little on there feet to get them to stand better in poses. One pack of putty will last your forever because you don’t need much. If you look through my post history you can see how I’ve posed some on the Neca stands. https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_api_fabt1_KhcVFbBEQHBDW
That is a NECA stand. You can buy them in packs of 6 or 8 at Target in the electronics dept by the figures.
Also found them on Amazon.
NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_apan_glt_i_MVQG8BFBWSQ4VT08CDEF?_encoding=UTF8&psc=1
NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_i_zecsDbJNMN28M
This is merely an example.of what I'm talking about. I use these for my action figure but if you read comments some people use these for pops
They have similar discs like these for cheaper if you keep looking on amazon
I don't know if this helps, but NECA makes these stands:
The peg seems to fit both my Smurfette and Danaerys Targaryen Pops, so I'm hoping this will help you. Ignore the Amazon price, I actually bought a pack of these for $10 at Target, check there first if you have one close by.
I found Big one that will fit the figure, but the prong to hook too is to skinny and too long.. I don't think there is a Hexagonal prong stand out there...
This are the ones I got
I use the Neca clear stands I got from target they got them on Amazon too Neca Clear Stand
Here’s a link of the ones I use. They have pegs
NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_api_glt_fabc_W513D46G257T8WH12NW6
I have never used these from Amazon before but they are a good price point.
Display stands: https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_glt_fabc_MYVHGZ938C98RSS8CQ64?_encoding=UTF8&psc=1
Flight stands: https://www.amazon.com/dp/B01BOV5I7I/ref=cm_sw_r_cp_apa_glt_fabc_XM41P041THVW8R5P444D
NECA - Action Figure Display Stands Display Stand - Clear https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_i_qCHECbDV6CA15
I find most NECA figures stand better if I have one leg bent forward and one leg bent back, so maybe try adjusting them back and forth a bit until her feet have solid footing.
You could also consider buying a different stand. NECA makes some round peg stands for the feet, or you could go with something more like a figma action stand, I like these ones.
As OP said they do. The pegs on these NECA stands fit perfectly. It's what I use.
Those are the Neca figure stands: https://www.amazon.com/NECA-Action-Figure-Display-Stands/dp/B00ICNW438 they also have ones for “dynamic poses”
Invest in a few packs of these.
Wow that's crazy. I've never had a problem with them and I've used them on their horror figures, the Mattel WWE figures, and Marvel Legends. You're referring to these, yeah?
NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_i_0T4kDbXJG3GTG
They work pretty well with some of them
Just a guess:
If you get one make sure to get these
Also beware they break pretty easily.
I use these and a little hot glue on the feet.
These work for most legends I have.
I have bought these and they work fine.
Also, check your boxes. Pops that need a stand have one included in the box. They are clear so a lot of people overlook them.
Have you looked into the stands NECA sells? LINK
I have bought these for missing stands:
They have multiple pegs, but are at least an inch wider in diameter.