What is Reddit's opinion of NETGEAR AC1200 Wi-Fi USB 3.0 Adapter for Desktop PC | Dual Band Wifi Stick for Wireless internet (A6210-100PAS)?

From 3.5 billion Reddit comments

Wireless adapter is pretty much a mass commodity product now. They are all pretty inexpensive (if you don't go for 4x4 ones). The #1 issue with them is the driver/os compatibility. You can check amazon review for a particular product for that (pce-i adapater tends to run into this type of issue more than usb one).

the 2nd issue, this is somewhat usb adapter specific is dissipation. some of those mini usb ones just aren't designed for continuous operation. I am using this one. It works

I did exactly what you’re trying to do. This is the usb WiFi adapter I went with. It works out of the box with raspap/raspberry pi os, 32 bit. NETGEAR AC1200 Wi-Fi USB 3.0... https://www.amazon.com/dp/B00MRVJY1G?ref=ppx_pop_mob_ap_share

I chose it because it’s supported by the os, and it doesn’t have a ridiculously long pair of antennas.

Pretty much any Wi-Fi adapter will do there's really no comparability issues with them. Some come with drivers and you don't really even need to install them but toucan if you'd like. I would recommend get a higher end one though

Here's the one I have https://www.amazon.com/dp/B00MRVJY1G/ref=cm_sw_r_cp_apa_i_18nhFb6D1Z3MT

It only shows up if a device is not recognized. Since a wifi adapter is not showing up anywhere in the list, you either don't have wifi or the adapter is physically disconnected. Is this a new computer? If so, many desktops (not laptops) do not come with WiFi. You can remedy this by purchasing a USB WiFi adapter. I'd recommend getting a wireless AC model (instead of N) because they are faster and newer (N will still work). You can usually get them at physical stores like Walmart and Best Buy or online (Amazon).

Here is an example: https://www.amazon.com/dp/B00MRVJY1G

Yeah, I haven't seen many adapters above $40, but the few I've seen have good reviews. This has caught my eye. The only thing I'm worried about is whether or not it requires wifi to install as it would take a lot of effort for my to get one on 2.4 GHz.

I've used the usb based wifi adapter, so far it has performed well above my expectation. This adapter is also compatible with Windows 10, which makes things smoother. As for performance, it maxes out my internet connection speed provided by my router even though the router is separated by multiple walls and a ceiling (I estimate to be about +5 meters away.)

NETGEAR AC1200 Wi-Fi USB Adapter High Gain Dual Band USB 3.0 (A6210-100PAS) https://www.amazon.com/dp/B00MRVJY1G/ref=cm_sw_r_cp_apap_4IM5xeVTtjEAI

Also remember, to use the AC feature provided, you must have a router that supports AC, mine doesn't =(

I've really liked my Netgear adapter when I used it for a while. It also supports beamforming so it could help a bit if your signal isn't the greatest.

https://www.amazon.com/NETGEAR-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G/ref=sr_1_1?ie=UTF8&qid=1483397819&sr=8-1&keywords=netgear%2Bwifi%2Badapter&th=1 this guy has worked perfectly fine for me for the past 3 years. currently running windows 10

Don't know why I didn't think of this before. Theoretically slower throughput than an internal card, but still should have enough to handle pretty much any modern wifi. I would recommend using the wire portion in addition to the stick to get it away from the pc a bit as USB3 and wifi can have interference. Should be fine if you plug the wire in and put the stick on your desk. Can def be more easily removed than an internal, then you can put it in a briefcase handcuffed to your best friends wrist when you don't need it.

I've had this adapter for a while now and I can't recommend it enough. There's no noticeable difference between it and my Ethernet connection in terms of ping, and about a 2 ms increase in pings.

go get yourself a Netgear AC1200 http://www.amazon.com/Netgear-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G/ref=sr_1_2?ie=UTF8&qid=1430714296&sr=8-2&keywords=netgear+ac1200

and an AC router if you dont have one

if you do, install the driver software, get it setup, then disable it starting on boot and then turn off the program, its a complete waste of resource and its a CPU hog and the reciever doesnt need it once its up and going.

very good connection and amazing speed, that is if you are talking about wireless right now.

USB adaptors are generally more expensive and not as good as PCIe ones. For example, these two are a couple of the better USB wifi adaptors, and they are still worse than a $25 PCIe one:

https://www.amazon.com/NETGEAR-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G/

https://www.amazon.com/Netgear-Nighthawk-AC1900-Adapter-A7000-10000S/dp/B073JHHNJ9/

See what I mean when I said you would have been better off with buying a motherboard with built-on wifi in the first place? Imagine how much better of a motherboard you could have gotten for an extra $50?

1. My advice would be to buy a separate router and access point to get the best performance possible. Depending on your budget, you have multiple choice. What I would recommend is for you to get a Ubiquiti EdgeRouter Lite and a Ubiquiti Unifi AP AC Lite, both together are going to be the same price of an R7000, but you will get so much more performance and flexibility. If you want to make sure to always get 150Mbps, you could add a second access point if you can wire them.

2. Make sure to get one with at least AC1200, and if possible, Beamforming. Something like this Netgear AC1200 or this TP-Link Archer T4UH would probably work well.

3. If you don't need 867Mbps on that PC, you might be ok with a USB dongle that supports N instead of AC. Another option would be to install a USB 3.0 card, you can get a PCI Express USB 3.0 card for about $20 on Amazon.

4. Yes, and no. The technology has advanced a lot but most consumer routers don't fully implement things to limit the cost. This is why I would recommend using Ubiquiti products instead of Netgear. Of course, if you have the budget, there are many more options that are "enterprise-grade" and that would allow you an even better connection. You could get a Ruckus R600 and get an incredibly powerful signal, but the access point is over $600. The Ubiquiti access point is a very good compromise between features and performance versus price.

dang, oh well, I brought something else really good, sure the down speed is 300 / 600 but here what I brought, and waiting for it to be delivered at Saturday, definitely after 5pm, after all, its typically Saturday deliveries. https://www.amazon.com/dp/B00MRVJY1G?psc=1&smid=ATVPDKIKX0DER&ref_=chk_typ_imgToDp

I can't wait and see if I gets at least 10-25+ mbps in both down and up, while lower pings, cause garbage wifi adapter I have is utterly so shit that it would get 150-1k+ ping spikes every 10-30s which is extremely annoying, imagine playing raindow six...

My laptop has the same issue. This is hopefully because your Wi-Fi card only allows 2.4 GHz Wi-Fi. I recommend getting a USB Wi-Fi adapter. Here's the one I have.

Get a better USB WiFi adapter.

Maybe this https://www.amazon.com/gp/product/B00MRVJY1G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

or maybe

https://www.amazon.com/TP-Link-usb-wifi-adapter-pc/dp/B08D72GSMS/ref=sr_1_4

NETGEAR AC1200 Wi-Fi USB 3.0 Adapter for Desktop PC | Dual Band Wifi Stick for Wireless internet (A6210-100PAS) https://www.amazon.com/dp/B00MRVJY1G/ref=cm_sw_r_cp_api_i_7ZZ0JV0ES3JJ8DT262ZR

https://www.amazon.com/NETGEAR-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G/ref=sr_1_2?dchild=1&keywords=netgear+wifi+A6210&qid=1630361261&sr=8-2 Has worked really well for me be it on 20 or 21.

https://www.amazon.com/NETGEAR-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G/ref=pd_lpo_147_t_1/136-6770513-6281566?_encoding=UTF8&pd_rd_i=B00MRVJY1G&pd_rd_r=6d723df2-e926-4756-b18b-4be55c25c2ba&pd_rd_w=MDTfi&pd_rd_wg=lt63R&pf_rd_p=a0d6e967-6561-454c-84f8-2ce2c92b79a6&pf_rd_r=SK9095MEA7QQWA1W179Q&psc=1&refRID=SK9095MEA7QQWA1W179Q

>Intel ax200

So I know you just ordered a new Wifi card for your laptop, but unless your going to use external antenna's, then your Wifi is going to use the same built-in Antenna's that your computer already uses, thus I'm not sure if you will see any improvements.

In your situation, I would suggest trying a USB based Wifi adapter and then use a USB extention cable to allow you to position the adapter for the best signal.

Something like this and add an extention cable to get the distance.

https://www.amazon.com/NETGEAR-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G/ref=pd_ybh_a_8?_encoding=UTF8&psc=1&refRID=RJ7ETF0B961BZV5B1J8T

You might check out this Netgear USB adapter. Netgear is a consistently good network device manufacturer. https://www.amazon.com/dp/B00MRVJY1G/ref=cm_sw_em_r_mt_dp_U_8oNiDb7ZX7YET

I have one of these if you could throw me an extra $5 for shipping.

I pay approx Rs. 3400 quarterly for 3 months.

I am thinking of considering this: https://www.amazon.in/Netgear-AC1200-A6210-100PAS-Wi-Fi-Adapter/dp/B00MRVJY1G/ref=sr_1_3?ie=UTF8&qid=1525798495&sr=8-3&keywords=wifi+adapter+ac

You can grab a PCI-E 1x wifi card like so, or you can get a USB dongle like so. I'm not endorsing either of these products, simply showing as examples.

https://www.amazon.com/dp/B00MRVJY1G/?tag=pcpapi-20

or

https://www.amazon.com/dp/B00HF8K0O6/?tag=pcpapi-20

https://www.amazon.com/NETGEAR-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G

Give this one a shot. If you have BB around you can return rather easily if it doesn't work for you. You do need a USB v3.0 port for it.

I'm trying to decide between two network adapters, which one should I get? The NETGEAR AC1200 Wi-Fi USB Adapter High Gain Dual Band USB 3.0 (A6210-100PAS) or the TP-LINK AC1300 Wireless Wi-Fi USB 3.0 Adapter (Archer T4U V2)?

I'm pretty sure it's this bad boy: Link

Perhaps one of these baby's can help.

Netgear AC1200 Wi-Fi Adapter High Gain Dual Band USB 3.0 https://www.amazon.ca/dp/B00MRVJY1G/ref=cm_sw_r_other_apa_l4QaybC4VX2C2

The best wifi stick I've ever owned. 2.4Ghz , 5Ghz, and 5Ghz AC!

Netgear AC1200 Wi-Fi Adapter High Gain Dual Band USB 3.0 https://www.amazon.ca/dp/B00MRVJY1G/ref=cm_sw_r_other_apa_D-acybM8AF4TX

i went with the netgear 6210 http://www.amazon.com/Netgear-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G

With your router, the Netgear A6210 (USB 3.0) is the best option and costs $56.

The older Netgear A6200 (USB 2.0) is available refurbished for $13 or new for $35.

http://www.amazon.com/gp/product/B00MRVJY1G?keywords=netgear%20wifi%20adapter&qid=1444836168&ref_=sr_1_1&sr=8-1

I have one of these: http://www.amazon.com/Netgear-AC1200-Wi-Fi-Adapter-A6210-100PAS/dp/B00MRVJY1G

It's USB. Shoot me an offer.

I currently use this haven't had any problems with it. Granted my net speed isn't the fastest. Still a stable 6MB/s download