I have these from amazon. the smallest works for small unicorns (as long as they are not those skinny neck ones.)
I just tested out filling with a funnel without having to cut anything on the disk. I used the square pour spout on the side of the disk along with the large funnel (link below) and it works flawlessly. The funnel fits as if it's designed for this task with the small indention in the side of the funnel spout needing to be lined up with the flat side of the square opening in order for it to fit snugly. I proceeded to fill the disk with the box of detergent and not a single granule was spilled. This is by far the best method as it retains the factory seal and should be repeatable numerous times.
​
https://www.amazon.com/dp/B000FKERMW?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details
Small funnel. I have these Norpro Stainless Steel Funnels The smallest one works fine in tiny bottles too small for GW pots. You can probably find something similar cheaper elsewhere.
Norpro Stainless Steel Funnels, Set of 3 https://www.amazon.com/dp/B000FKERMW/ref=cm_sw_r_cp_api_glt_fabc_DJ2NCTJF4M7M8H6YRKZZ?_encoding=UTF8&psc=1
I have some tiny metal funnels but inevitably it spills a few drops anyway. I should get some of bottle pourer tops to prevent that.
Edited to add links
Norpro Stainless Steel Funnels,... https://www.amazon.com/dp/B000FKERMW?ref=ppx_pop_mob_ap_share
[UPGRADED VERSION] 12 Pack Stainless Steel Classic Bottle Pourers Tapered Spout - Liquor Pourers with Rubber Dust Caps https://www.amazon.com/dp/B074YZX457/ref=cm_sw_r_cp_api_i_ZxCgFbENS43N6
I bought them and the funnels from amazon.
Funnels: Norpro Stainless Steel Funnels, Set of 3 https://www.amazon.com/dp/B000FKERMW/ref=cm_sw_r_cp_api_i_3RDuEbHX6X3FY
Dropper bottles: Wowlife Clear 5ml/10ml/8ml/15ml/20ml/30ml/50ml White Plastic Empty Squeezable Dropper Bottles 50 Pcs Eye Liquid Dropper with Caps (5ml) https://www.amazon.com/dp/B00JD3YYWU/ref=cm_sw_r_cp_api_i_aUDuEbW3GSR8R
FYI: I've deleted the stuff after the AISN in the address.
I use these. The middle one is perfect size.
Here ya go: Norpro Stainless Steel Funnels, Set of 3 https://www.amazon.com/dp/B000FKERMW/ref=cm_sw_r_cp_api_fabc_LoXUFbCEBXDVB
Actually used my medium sized one from a set like this: Norpro Stainless Steel Funnels, Set of 3 https://www.amazon.com/dp/B000FKERMW/ref=cm_sw_r_cp_api_fabc_LoXUFbCEBXDVB
The large size is perfect for filling standard 5oz bottles and up.
Thanks a lot... ordered some cool little funnels too. https://www.amazon.com/gp/product/B000FKERMW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
> Process is pretty much along the lines of ours but I would suggest going with pharmaceutical grade PG. None of the solutions can be sanitary unless made in a ISO certified clean room. Check out https://www.terrauniversal.com/cleanrooms/iso-classification-cleanroom-standards.php
> Use only stainless steel utensils and surfaces. It's the only way to keep it legit. Even use Stainless funnels, you can get them cheap from amazon. Here is the first set I bought when I started in making liquids. https://www.amazon.com/Norpro-3-Piece-Stainless-Steel-Funnel/dp/B000FKERMW?th=1
> Checkout restaurants that are going out of business for stainless steel tables I picked up some pretty large ones for under 500. They look super nice and are very easy to clean to keep things sanitary.
> Another thing you need to remember your product is only as clean as your supplier, if you source from China, look up the videos of the labs that these compounds are made in. Sanitary will no longer exist in your vocabulary. Don't quote me but I think Dragon Eric's suppliers lab is ISO certified.
> If you source from the US they are required to be ISO certified so you need not worry. If you are interested in getting product Synth'd in the states, you need a tax ID and it will cost anywhere from 1-3k to spin the lab up then the costs of time and materials. For example if Synth'd in the states a gram of Etizolam is going to run you about 110$. To make it worth it, you would need to buy at least 500-800 grams of a product. Some are cheaper than the others but Etizolam is the most expensive to have synth'd here but if you ever want to go in on a buy let me know. We can split the cost of spinning up the lab. Some things they won't Synth but most everything can be synth'd as long as it is not controlled in the lab in Colorado and in New York as they have labs in both locations.
> It seems like your a good guy and I look forward to working with you on a few projects I have in mind, especially exchanging notes on time release and proper bonding agents. Once I transfer them from gibberish to structured notes, I will send you a link to them.
~ /u/RchemDepot
Process is pretty much along the lines of ours but I would suggest going with pharmaceutical grade PG. None of the solutions can be sanitary unless made in a ISO certified clean room. Check out https://www.terrauniversal.com/cleanrooms/iso-classification-cleanroom-standards.php
Use only stainless steel utensils and surfaces. It's the only way to keep it legit. Even use Stainless funnels, you can get them cheap from amazon. Here is the first set I bought when I started in making liquids. https://www.amazon.com/Norpro-3-Piece-Stainless-Steel-Funnel/dp/B000FKERMW?th=1
Checkout restaurants that are going out of business for stainless steel tables I picked up some pretty large ones for under 500. They look super nice and are very easy to clean to keep things sanitary.
Another thing you need to remember your product is only as clean as your supplier, if you source from China, look up the videos of the labs that these compounds are made in. Sanitary will no longer exist in your vocabulary. Don't quote me but I think Dragon Eric's suppliers lab is ISO certified.
If you source from the US they are required to be ISO certified so you need not worry. If you are interested in getting product Synth'd in the states, you need a tax ID and it will cost anywhere from 1-3k to spin the lab up then the costs of time and materials. For example if Synth'd in the states a gram of Etizolam is going to run you about 110$. To make it worth it, you would need to buy at least 500-800 grams of a product. Some are cheaper than the others but Etizolam is the most expensive to have synth'd here but if you ever want to go in on a buy let me know. We can split the cost of spinning up the lab. Some things they won't Synth but most everything can be synth'd as long as it is not controlled in the lab in Colorado and in New York as they have labs in both locations.
It seems like your a good guy and I look forward to working with you on a few projects I have in mind, especially exchanging notes on time release and proper bonding agents. Once I transfer them from gibberish to structured notes, I will send you a link to them.
These are what I got. I like stainless steel.
I haven't bought a set but I want to try these. I believe they are called "spice funnels."
https://www.amazon.com/dp/B000FKERMW/ref=cm_sw_r_other_awd_vPQowbMHD5BD6
Just pour using a metal funnel like these: http://www.amazon.com/gp/product/B000FKERMW/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
To get a little bit more or less, I use glass droppers like these: http://www.amazon.com/gp/product/B00N53KQV2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Easy to sterlize both which is more important than most may think.