What is Reddit's opinion of OPULENT SYSTEMS 24"x24"x48" Hydroponic Mylar Water-Resister Grow Tent Reflective Garden Growing Dark Room with Observation Window, Removable Floor Tray and Tool Bag for Indoor Plant Growing 2'X2'?

From 3.5 billion Reddit comments

Came here to say this- those totes are $20 at Home Depot near me- that’s $80 in totes alone/ you can buy a grow den bigger than that off Amazon for less.

Edit- I read his reply it didn’t make much sense to me, access? That can’t be easier then having a opening tent.

Also- OPULENT SYSTEMS 24"x24"x48" Hydroponic Mylar Water-Resister Grow Tent Reflective Garden Growing Dark Room with Observation Window, Removable Floor Tray and Tool Bag for Indoor Plant Growing 2'X2' https://www.amazon.com/dp/B07JNQXMRT/ref=cm_sw_r_cp_api_glt_fabc_WJ6564ZRMPGY5Y86KRBX

$60

No worries lol I honestly bought this one it’s only 60$ and works great for a second little tent. Zippers fine, stitching is nice, and material seems sturdy. It’s a nice tent. I researched and bought it with the intention of a separate veg tent or quarantine area for moving plants from outside to my tent. Now I grow autos with staggered harvests and use it mainly for drying and will be using it for isolation as it gets colder outdoors.

Amazon OPULENT SYSTEMS 24"x24"x48" Hydroponic Mylar Water-Resister Grow Tent Reflective Garden Growing Dark Room with Observation Window, Removable Floor Tray and Tool Bag for Indoor Plant Growing 2'X2' https://www.amazon.com/dp/B07JNQXMRT/ref=cm_sw_r_cp_api_i_IscKDbT0Q3Q9J

Ah ok good to know.

The kit just made it seem easy - I guess i just need the tent/light/fan?

Any light recs? Keep reading spider farmer and mars hydro... so i guess spider farmer?

​

Was thinking these :

​

​

Spider Farmer® SF1000 LED Grow Light With Dimmer Knob-

https://www.spider-farmer.com/products/sf-1000-led-grow-light/

​

OPULENT SYSTEMS 24"x24"x48" Hydroponic Mylar Water-Resister Grow Tent Reflective-

https://www.amazon.com/OPULENT-SYSTEMS-Hydroponic-Water-Resister-Observation/dp/B07JNQXMRT/ref=sr_1_10?keywords=2x2+grow+tent&qid=1666687779&qu=eyJxc2MiOiI1LjUwIiwicXNhIjoiNS4xOCIsInFzcCI6IjQuODEifQ%3D%3D&sr=8-10&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

VIVOSUN 4 Inch 190 CFM Inline Fan with Speed Controller, 4 Inch Carbon Filter and 8 Feet of Ducting, Temperature Humidity Monitor for Grow Tent Ventilation-

https://www.amazon.com/VIVOSUN-Controller-Temperature-Humidity-Ventilation/dp/B07SHB2WF9/ref=sr\_1\_8?keywords=4%22+inline+fan+and+filter&qid=1666687780&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sr=8-8&ufe=app...

1. Gotcha, I'll try to wait til Spring to repot.
2. Oh OK. I might get additional Bonsai seeds that would grow well with the Delonix Regia so I can start that forest.
3. Re: the conifers, I plan to try the six weeks in the fridge next winter, to simulate a period of dormancy. Currently thinking they'd be way too fragile this winter to put them through that, but hopefully - by winter 2021 - they could handle it (that is - if I manage too keep them alive til then)
4. Thinking of going for this grow tent, and this grow light listed as having 134w±5% 110V as Actual Power. From the reviews on Amazon, it seems like it would be a good setup to start with. Curious to hear your thoughts though as you seem to be leaps and bounds ahead of me re: Bonsais :)

Thanks again for all the info!

My ventilation solution costed me 140$ and I am happy with it.

-Grow tent: OPULENT SYSTEMS 24"x24"x48" Hydroponic Mylar Water-Resister Grow Tent Reflective Garden Growing Dark Room with Observation Window, Removable Floor Tray and Tool Bag for Indoor Plant Growing 2'X2' ... https://www.amazon.ca/dp/B07JNQXMRT/ref=cm_sw_r_cp_apa_i_.0O.DbCT04RAG

-inline fan: VIVOSUN 4 Inch 195 CFM Inline Duct Ventilation Fan Vent Blower for Grow Tent https://www.amazon.ca/dp/B01M7S46YZ/ref=cm_sw_r_cp_apa_i_S1O.DbGJYQAJ2

-Some 4" dryer ducts (flexible makes life easier) from your local hardware store

And of course the filter: VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan Pre-Filter Included https://www.amazon.ca/dp/B01DXYMBU6/ref=cm_sw_r_cp_apa_i_w3O.Db3HZ4E68

You'll need 4" hose clamps as well.

The grow tent is AWESOME because it keeps the printer in pitch black so no UV issues, it has a little net for holding tools, a window to watch your print if you're curious, and the bottom zips off and is waterproof in event of a leak. And it also has the 4" inlets for your ventilation