What is Reddit's opinion of PERLESMITH Speaker Stands Height Adjustable 30-44 Inch with Cable Management, Hold Satellite Speakers and Small Bookshelf Speakers up to 8lbs -1 Pair?

From 3.5 billion Reddit comments

I got these! The cords do not fit inside but I wrapped them around and it looks fine.

Link

I have the Q90R (2019) and bought these--

PERLESMITH Speaker Stands Extend... https://www.amazon.com/dp/B07925B8PD?ref=ppx_pop_mob_ap_share

I am probably gonna get the Q990B on BF next month, and I would buy those stands again, they haven't given me any problems and I've been pleased.

PERLESMITH Speaker Stands Height... https://www.amazon.com/dp/B07925B8PD?ref=ppx_pop_mob_ap_share

These do work and have the correct screw size for the back of the speakers and I think they sit at a perfect height. The base legs stretch out pretty damn wide so watch out. The other downside is the power cords will not fit through the cable channel inside the tubing. I don’t mind because I just took black Velcro and snaked it up the back side of the tube. If that cosmetic would bother you then I don’t suggest these. You would need a fatter pole support to slide the power cables through.

I got these stands for my setup

PERLESMITH Speaker Stands Extend 30-45 Inch with Upgraded Cable Management, Hold Satellite, Small Bookshelf & Bluetooth Speakers up to 8lbs(i.e. Vizio https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_apanp_dTUZQDkLKndLq

I ordered these, but would like to find some with cable management. PERLESMITH Speaker Stands Extend 30-44 Inch with Cable Management, Hold Satellite, Small Bookshelf & Bluetooth Speakers up to 8lbs(i.e. Polk, JBL, Sony & Samsung) -1 Pair https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_api_glt_fabc_QG4JKVDTW99XRP5PH1MP?_encoding=UTF8&psc=1

It was these.

https://www.amazon.com/PERLESMITH-Adjustable-Stands-Extends-Satellite-8lbs-Heavy/dp/B07925B8PD/ref=mp_s_a_1_2_sspa?dchild=1&keywords=speaker+stands&qid=1625952048&sr=8-2-spons&psc=1&smid=A2RX6V9DXIIDP9&spLa=ZW5jcnlwdGVkUXVh...

I bought these:

https://www.amazon.com/gp/product/B07925B8PD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

And the Vizio rear speaker cable will thread inside the stand tubes. You need to pull them through with another cable (even a tied string will do) as there is a slight bit of resistance.

I'm going to pick these up on Amazon for my Vizio v51-h6 surrounds.

https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_apa_glt_fabc_0YJW3T1DP4FDCG24QWJ9?_encoding=UTF8&psc=1

Apparently the pole is large enough for the square connectors. Its also easier to run the cords through in reverse.

https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_api_glt_fabc_SB29KN18VP3G1XAVXQ5B

These should work. Can’t tilt them but can adjust the height to where it hits you right in the ears. Good luck. There are more expensive options but this is r/budgetaudiophile yk.

Wow I really like that one, thanks! I ended up buying one very similar (base looks exactly the same). The one I ended up getting was https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_em_apa_fabc_i2t6Fb79TWFM3?_encoding=UTF8&psc=1 which is cool, but I like the bottom part that the speaker sits in with the one you posted along with the screw in the back. Because mine are only affixed with the screw on the back the speaker can twist a little bit on the stand. I think I'll get these for the basement setup I'm working through now.

I just bought these for my 5.1 rears and they work pretty tight. I added a plastic spacer and they were perfect: PERLESMITH Speaker Stands Extend 30-45 Inch with Upgraded Cable Management, Hold Satellite, Small Bookshelf & Bluetooth Speakers up to 8lbs(i.e. Vizio, Polk, Bose, JBL, Sony & Samsung) -1 Pair https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_api_i_Qt1IFbDGMV3VT

>https://smile.amazon.com/PERLESMITH-Adjustable-Stands-Extends-Satellite-8lbs-Heavy/dp/B07925B8PD/ref=sr\_1\_3?crid=2FUHC98K13YLJ&dchild=1&keywords=perlesmith+psss1&qid=1599656961&sprefix=perlesmith+pss%2Caps%2C153&sr=8-3

These are the mounts. Really sturdy and come with the screws needed to mount the q90r rears. Happy with them. Before I bought them I searched reviews specifically for q90r, and these had them so I took the chance.

https://www.amazon.com/PERLESMITH-Adjustable-Stands-Extends-Satellite-8lbs-Heavy/dp/B07925B8PD

Those stands say they can hold 8lbs and support the screw mounting style.

Polk OWM5's aren't great, a decent pair of bookshelf speakers would be an upgrade. But as surrounds or Atmos channels they work pretty well.

Yup r41m. And the other stands are PERLESMITH Adjustable Height Speaker Stands-Extends 30" to 45"- Hold Satellite & Small Bookshelf Speakers Weight up to 8lbs-Heavy Duty Floor Stands fo https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_apip_fvgzs4CeoWv86

I use these for mine PERLESMITH Speaker Stands Extend... https://www.amazon.com/dp/B07925B8PD?ref=ppx_pop_mob_ap_share

I took a chance on these Speaker Stands. They work fine. :)

I had our rears on end tables, but the elevation really helps in ATMOS effect.

I bought the linked stands at Amazon, two power cables and two replacement plugs. I am cutting the plug off the cable, stringing them through the stands and then installing the replacement plugs. I'm not a fan of the wires showing. Also, the power cables are longer than the Samsung provided ones so I don't have to run extension cords.

https://www.amazon.com/gp/product/B07925B8PD/

I used these for my 950A rears

https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_api_i_YF1DFH5RB06VWVXJ92C1?_encoding=UTF8&psc=1

https://smile.amazon.com/gp/product/B07925B8PD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Either the Perlesmith or the Mounting Dream (link embedded in text). Don't get the Sanus as it's not as stable and cannot load more than 3.5 lbs which are very limited. This model can only hold small speakers. My Samsung 9500S rear speakers are 3.7 lbs each and the Sanus couldn't handle it. It tilted forward. That's being said, be sure to check your model compatibility and weight to the two stands I reccomended.

I have this set for my rear Elevate speakers. You cant run the wires through them because the connector is too large, but you can get a good look either wrapping the cables around the stand or using a fabric cable organizer that would cover the entire thing.

https://www.amazon.com/gp/product/B07925B8PD/

Deal link: Amazon

Category-wise subreddits for Amazon Deals:

Is your reddit feed getting flooded with deals for products you are not interested in? Below are our category-wise subreddits where I crosspost from the main sub.

Discord Server: Instant deal notifications on our Discord Server!

Amazon Canada Deals: /r/OnlineDealsCanada

Disclaimer: The deal links are affiliated. We may earn a small share on qualifying purchases. It does not affect the deal price in any way.

Yes I got this and was able to hide wires easily

PERLESMITH Speaker Stands Extend... https://www.amazon.com/dp/B07925B8PD?ref=ppx_pop_mob_ap_share

I got these stands for the spk8 which are the optional rear speakers for the sn10yg.

https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_apap_YwYVYqIyYd7xa

PERLESMITH Speaker Stands Extend... https://www.amazon.com/dp/B07925B8PD?ref=ppx_pop_mob_ap_share

Totally happy with these

Funny, I was just looking for the same info. Ordered these for the rears, and they come tomorrow. I read reviews beforehand, and there are a few that say it works with the q90r rears. I assume the screws that come with the stands work. Ill check the parts list for the stands and see if they list the screw size, if no one gets back to you before i do

​

https://smile.amazon.com/gp/product/B07925B8PD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I really wanted those stands because they are made specifically for the samsung rears. After spending what I did on the TV and Q90r, i decided to pick my battles with the wife and go with the ones I did.

They seem sturdy, but the q90r rears cant be routed inside the stand because of the plugs for the wall/speaker. I will be doing some cleanup to try and conceal the wires as best I can on the stands.

https://smile.amazon.com/PERLESMITH-Adjustable-Stands-Extends-Satellite-8lbs-Heavy/dp/B07925B8PD/ref=sr_1_3?crid=2FUHC98K13YLJ&dchild=1&keywords=perlesmith+psss1&qid=1599656961&sprefix=perlesmith+pss%2Caps%2C153&sr=8-3

These are the ones I have, and I got them on a lightning deal the other day for 25. All in all happy with them. They came with the proper screws for the q90r rears.

https://www.amazon.com/gp/product/B07925B8PD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I just picked up these this past weekend for my Q90R and it seems to do the job fine, there is a slight downward tilt but nothing drastic where it is interrupting the sound.

Loving these Micca MB42x, however why don't they have any mounting options? Every single person recommends getting the speakers away from the turntable surface for isolation, however havent seen many spkr stands that work for them. The Sanus option seems like overkill, as with most Sanus...

I ordered these mistakenly and didnt want to just velco them to the metal plate (tiny) that came with em. Micca's didnt have any mounting holes like satellite and some bookshelf spkrs, oh well.

https://www.amazon.com/gp/product/B07925B8PD/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I had a block of poplar in my garage, cut 3x5 blocks, countersunk a screw hole and sanded em down. Found some slender felt sticky strips, one on each edge and they can be wiggled accordingly or just lifted off without any hardware or screws.

https://imgur.com/gallery/3RLGjPt

Turned out better than expected, at least better than going back to USPS. Hope this helps, or that the 'sticky' would include spkr stand options. (NOt just desk wedges, but real stands)