I see that now, but I need a cable to convert from the lain li cable to that header. I found this phanteks cable on Amazon and am wondering if it will work or if gigabyte has its own version.
Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black https://www.amazon.com/dp/B0848VH1JQ/ref=cm_sw_r_apan_glt_i_9VHQXQGYJTXFWYTNAN4K
Thanks for you help btw
Yes. Phanteks makes an argb connector that allows you to connect their proprietary connector to the standard 3-pin. It comes with the 3 pack fan set or you can purchase it separately. Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black https://www.amazon.com/dp/B0848VH1JQ/ref=cm_sw_r_apan_glt_i_8R6HNB5V35GFYSPZWFX4?_encoding=UTF8&psc=1
The RGB cable I am talking about looks like this but the only head on my mother board that is some what relavent to RGB is the one labeled Jrainbow_1
Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black https://www.amazon.ca/dp/B0848VH1JQ/ref=cm_sw_r_cp_api_fab_LL.EFbXM3K6B8
> I won't be able to control them individually?
Yeah, that's unfortunately the case. To be able to control each element individually you'll need to plug each one into a single "header" of the actual device doing the controlling (be it the motherboard -but mobos dont usually have more than 3 argb headers- or a discrete controller). For your use case maybe you'd be better off getting phanteks to generic argb adapters and any of the generic argb controllers listed here
Well, I‘ve got the same Case w/ the same 140mm Rear Fan. I also bought this Extension Cable to connect the Rear Fan w/ the 3 Front Fans.
First of all, the 3 Front Fans come Pre Daisy Chained leaving one 3pin ARGB Cable for the Motherboard. I then connected the Extension Cable (From the Rear Fan) w/ the DRGB Fan Cable which is connected with the M/B Cable. This basically means: Extension Cable connects w/ DRGB Fan Cable. M/B Cable goes into the Motherboard. And you have to connect the Sata Cable w/ your PSU to Power the RGB.
And this is the Result!
Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black
More information: https://smile.amazon.com/dp/B0848VH1JQ/ref=cm\_sw\_em\_r\_mt\_dp\_E0DCTX8DSZ99A7YPM4TY?\_encoding=UTF8&psc=1
About a year ago I build a PC with a bequiet PureBase 500dx case and a Gigabyte B550 AORUS Elite ATX AM4 motherboard.
So far I have been using the button on the front panel to control the case's front RGB (which meant most of the time it was just off, because using that button is a hassle). By pure chance I found out the case's RGB can also be controlled via the motherboard.
The case is supposed to come with an ARGB connector (the leftmost connector pictured here), however I either lost mine or my case never had one.
My front panel does have a 3-pin JST-SM connector (something like this), which I assume is for RGB.
Is this the adapter I need to control my case's front RGB via my motherboard?
I'm using it with the controller with no issues. You can buy a cable which has two types connectors on it. One end has the 5v plug which connects to the LED, the other end(s) (usually a splitter cable) has a male and female dRGB plug, so you can daisy chain it to the Uni Fan's.
Be aware, one or two RGB settings in L-Connect don't fully light the whole strip up. I's not a problem for me, as I never used them anyway.
You may actually need another cable - can't remember off-hand as it's all tucked away.
and
You should have a D-RGB adapter that on one end connects to the MB (3 pin, not 4) and a Phanteks fan on the other.
Check the PDF manual I linked to.
It should be this cable (included with P400A): https://www.amazon.com/Phanteks-Digital-PH-CB-DRGB3P_MB-Extension-Motherboard/dp/B0848VH1JQ
​
Actually after reading this:
https://www.reddit.com/r/buildapc/comments/hzp7kt/help_with_plugging_in_fan_rgb_headers_to_gigabyte/
EDIT:
it seems the MB may only support 12V non-addressable RGB
so you would need the non-addressable cable I linked in my first comment
I used this:
https://www.amazon.com/dp/B0848VH1JQ/ref=cm_sw_r_cp_apa_i_-EcvFbCW5WR35
Looks like it's unavailable now on strix 570 mobo, but maybe will help you find it. I paid like $3.74 for it from Amazon just a couple months ago.