I have these exact speakers & stands Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & Small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and Others) - Set of 2 - Model: HTBS https://www.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_apan_i_5GMC74A4G86JCBHA3JXE?_encoding=UTF8&psc=1
What about something like this? You're free to move them about and cable management is inside the pole!
I bought these and they work perfectly. One of the provided screw options worked. Weight doesn't seem to be a concern, they are stable. The only issue is that you cannot run the power cord through the stand as the diameter is too small. It comes with cable ties to tidy it up. I'll send a couple pictures of the setup in a minute.
https://www.amazon.com/dp/B002HZHUCW?psc=1&ref=ppx_yo2_dt_b_product_details
I bought this set recently and waiting for it to ship. Seems like a great affordable option with a lot of flexibility.
Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & Small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and Others) - Set of 2 - Model: HTBS https://www.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_apan_glt_fabc_6RYG0JPQPFKA255X30K1?_encoding=UTF8&psc=1
Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & Small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and Others) - Set of 2 - Model: HTBS https://www.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_cp_api_glt_fabc_BB4W1GNZ1994CT2F0J4C?_encoding=UTF8&psc=1
I just bought these to use with mine, Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & Small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and Others) - Set of 2 - Model: HTBS https://smile.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_cp_api_glt_fabc_EBDPP9FA5FQQXRRGSQ36?_encoding=UTF8&psc=1
Good luck with your setup
Samsung SWA-9500S rear speakers are definitely worth buying for HW-Q900A to complete the setup.
As for the stands, I purchased SANUS Adjustable Height Speaker Stand (Model: HTBS) from Amazon.
Check out reviews with images on Amazon (link below);)
As the title says. I have a non-ideal theater room layout. I'm re-using a 5.1 setup I had before. The 3.1 portion is great, sub is behind the couch. However, couch is against the wall, and not only can I not mount the surrounds on the side walls, I can't even place them on stands on the sides of the couch. This is my current compromise, but I'm wondering if there is a better way?
Additional details: this is the loveseat sectional couch, so at the outside corners of the couch there are big wood blocks. the current speaker stand position is about as outboard as I can go
currently using these speaker stands, so I can concede there is probably room for improvement to help optimize the location a bit, as the feet are big and the central placement of the pole doesn't help either https://www.amazon.com/gp/product/B002HZHUCW/
Would love any advise here! (room is a 14'x9', seating position is about 12' from the screen)
probably this one: https://www.amazon.com/Sanus-Adjustable-Height-Speaker-Stand/dp/B002HZHUCW/
Seems to be the go to generic small speaker stand, you'll want to double check it works with those speakers though. Vizio's tend to have weird proprietary plugs that might make the cable not fit into the wire channel..but thats gonna be an issue on any wire channel i believe.
See if they still work out.. if not and if you can replace/sell them, then this might be a good way to have bookshelf speakers fit into this setup: https://www.amazon.com/SANUS-Adjustable-Height-Speaker-Stand/dp/B002HZHUCW/ref=sr_1_6?s=furniture&ie=UTF8&qid=1507355309&sr=1-6&keywords=speaker+stands
Good on you for going with a gigantic screen. Plenty of upgrade potential sound system wise as well. What projector are you using? Short throw?
A few recommendations - bring those fronts down to ear level, and rears down to about the recommended height of 3 feet above ear level when you are sitting. You could use a stand for the left rear - https://www.amazon.com/dp/B002HZHUCW/
If your worried about stand stability, use a barbell weight on top of the baseplate to weigh the stand down and make it more secure - https://www.amazon.com/dp/B003072HC4/
Cable channels will help hide your cables really nicely - https://www.amazon.com/dp/B0015EDVVU/
How about use these so you can have better positioning.
https://www.amazon.com/Sanus-Adjustable-Height-Speaker-Stand/dp/B002HZHUCW
​
Maybe to the sides of the listening position or slight at the back pointing to the central listening position. Also maybe position the around ear level near the level of the sound bar? So that the audio calibration won't need to make such big adjustments for the delay and volume for the atmos ceiling bounced sound?
I bought these to use with my M512:
https://smile.amazon.com/gp/product/B002HZHUCW/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
They are great and come with little velcro ties to secure the speaker wires to the poles on the stand for a neat/tidy look.
Got these lightweight Sanus stands and kind of rigged this set of wall mounts built specifically for the Roam to sit on top. Wish the magnet was a little stronger on the wall mounts but pleased with the minimalism of the configuration for getting the Roams a little higher off the ground. Thought it was a decent solution for some good outdoor audio that I'd pass along. I'm always blown away by how much improvement a stereo pair of speakers produces.
Item | Current | Lowest | Reviews |
---|---|---|---|
Sanus Adjustable Height Speaker Stand - Extends 2… | $55.79 | $55.79 | 4.5/5.0 |
^Item Info | Bot Info | Trigger
Item | Current | Lowest | Reviews |
---|---|---|---|
Sanus Adjustable Height Speaker Stand - Extends 2… | $55.79 | $55.79 | 4.5/5.0 |
^Item Info | Bot Info | Trigger
Item | Current | Lowest | Reviews |
---|---|---|---|
Sanus Adjustable Height Speaker Stand - Extends 2… | $55.79 | $55.79 | 4.5/5.0 |
^Item Info | Bot Info | Trigger
Item | Current | Lowest | Reviews |
---|---|---|---|
Sanus Adjustable Height Speaker Stand - Extends 2… | $55.79 | $55.79 | 4.5/5.0 |
^Item Info | Bot Info | Trigger
As the title says. I have a non-ideal theater room layout. I'm using a visio sound bar, so this is a 5.1 setup. Sound bar is great, sub is located in the picture, behind the couch. However, couch is against the wall, and not only can I not mount the surrounds on the side walls, I can't even place them on stands on the sides of the couch. This is my current compromise, but I'm wondering if there is a better way?
​
Additional details: this is the loveseat sectional couch, so at the outside corners of the couch there are big wood blocks. the current speaker stand position is about as outboard as I can go
​
currently using these speaker stands, so I can concede there is probably room for improvement to help optimize the location a bit, as the feet are big and the central placement of the pole doesn't help either https://www.amazon.com/gp/product/B002HZHUCW/
​
Would love any advise here!
I bought a condo with wood paneling so I didn’t want to deal with drilling into the wall. The OLED TV stand has a little piece that keeps it from tipping over you just remove to wall mount and the Elevate slips right over the stand and locks in. Our couch is in the middle of the room which is why I went stands instead of wall mounts for the satellite speakers.
I have just bought SANUS Adjustable Height Speaker Stand (Model: HTBS) for my Samsung SWA-9500S rear speakers
Check out Reviews with images, it will give you a clue ;)
I used the same Sanus ones for the Q950t as well. https://www.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_cp_apa_glt_fabc_775SXK57DJPVG35D163N
This looks most similar to what I have.
https://smile.amazon.com/dp/B002HZHUCW/
Mine aren't that sturdy, but are fine with small speakers.
Here are the stands that I bought. Keep in mind the rear speaker wire is very thick and the connectors are oddly shaped. You will not be able to run the rear wires through the tubes of these stands. Also, you will have to put the bracket on backwards because of the way that we are speakers are designed. I suggest you don't get these. I myself am considering returning them.
https://www.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_cp_apa_fabt1_eNUWFb51EMN4B?_encoding=UTF8&psc=1
Based on Amazon reviews the link below should in theory be good for running the wires through the tubes of these stands.
https://www.amazon.com/dp/B07925B8PD/ref=cm_sw_r_cp_apa_fabt1_mPUWFbGD1SWQ3?_encoding=UTF8&psc=1
Maybe someday I'll get them
looking for the same thing... saw this on Amazon, and looks like it will work if you make a quik trip to home depot for some screws/nuts/washers. Look at the customer uploaded photos, one guy, (p4killer or something like that) uploaded pics of how he did this. Uses the optional horizontal brackets on the stand to attach the jbl speaker bracket. https://smile.amazon.com/Sanus-Adjustable-Height-Speaker-Stand/dp/B002HZHUCW/ref=cm_cr_arp_d_product_top?ie=UTF8
Not sure about the Samsung in particular, but I've used these Sanus stands with both Vizio and LG rear speakers: https://smile.amazon.com/dp/B002HZHUCW/
Awesome. I currently use: https://www.amazon.com/dp/B002HZHUCW/ref=cm_sw_r_cp_apa_i_8QmmFbM58G8FG
For my rears
I just bought it for $40 on Amazon. LINK
Thank you! No problem at all, here you go https://www.amazon.com/gp/product/B002HZHUCW/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
The price on the only ones they have in stock seem a little high. I'd definitely google them if thinking about purchasing. $39.99 was the norm price while I was watching them.
It's all ordered I'll try the Lepai out and upgrade if need be.
Between these two satellite and shelf stands which would be easier to mount the Miccas? I'm assuming the shelf ones will be easier/more secure but the satellite speakers will look better?
As I understand the hole in the back is for sound not for mounting so either way I'll need to use some short screws to mount it?
Speaker stands would be another option. Like these:
With Polk OMW3's would be relatively unobtrusive.