Simple Deluxe HIWKLTCLAMPLIGHTM Clamp Lamp Light with 8.5 Inch Aluminum Reflector Up to 150 Watt E26 Socket (No Bulb Included) 6 Feet 18/2 SPT-2 Cord, 1-Pack , Silver https://www.amazon.com/dp/B01E9IY6US/ref=cm_sw_r_cp_api_i_BVY7PBDKFR3KNP6AV5HB?psc=1
There’s this one that clamps on to things and you can change the tilt
Could I get something like this and then use one of those light bulbs I linked in a below comment? They're designed to reflect light so that should help with the CFL issue right? https://www.amazon.com/Simple-Deluxe-Listed-Aluminum-Reflector/dp/B01E9IY6US/ref=sr_1_5?ie=UTF8&qid=1519680793&sr=8-5&keywords=heat+lamp+holder
Clamp lights are great, you can clamp them anywhere (also called can lights in some places Simple Deluxe https://www.amazon.com/dp/B01E9IY6US/ref=cm_sw_r_cp_api_mb8ezb1KVT9QS). So you can stick it onto the tripod. Or if you have the PC on a desk and your webcam is placed on the monitor, pointed toward you, you can attach it to the desk, really anywhere. And if the light is too bright and your picture is blown out, throw on some white, heat resistant oven paper/parchment and attach it with a wood clothespin. This will diffuse the light, softening it and creating less harsh shadows creating a more pleasing look.
If you are going to be playing console games, like your Xbox, you will need a capture card such as the ElGato HD60s, Razer Ripsaw, or Aver Media. These capture the HDMI Out signal, pass it through to the tv, and then by USB takes the signal to your computer. Or if you want to try and play PC games, you will just need OBS. OBS is a good software to have anyway if you are using a capture card, you can add the capture card into an OBS scene, add your webcam, maybe some graphics and twitch alerts as well.
If you want to get really cheap, try getting a clamp light or two from Lowes/Home Depot and get some soft bulbs (maybe get bulbs that are daylight balanced so you can mix it with some window light). Then bounce those off the ceiling or walls.
For some closer bounce, try bouncing off of a white tshirt or white sheet, or even through a frosted shower curtain (something I do for interviews).
With a constant source like this, you can see the issues you have with shadows and easily figure out how to get the look you want.
Amazon! A small clamp light and a light bulb that hopefully matches the best specs for a good grow light! It took me a couple tries to find one small enough to not blind everyone around my desk too, and I went off of suggestions to get one with 30W+, 6500K, and 2000+ lumens.
Plenty of options out there. Simplest & grungiest thing would be to get a bunch of clip lights:
​
and throw whatever bulb you need in them. Wide flood if it's close - like under ~5 from bulb to performer's head, medium flood if you have a little more room (5-10), spots if they're even further (10-15). Here's a cheap option for control and color: https://www.amazon.com/Changing-Colors-Dimmable-Control-Equivalent/dp/B0798MPJ86/ref=sr_1_5?ie=UTF8&qid=1544154305&sr=8-5&keywords=e26+spot+bulb
​
If it's a further throw distance than maybe 10-15 feet, you may want something with more power and precision. The Monoprice lights might be overkill, but you could start looking at some proper theatrical lights, like a PAR 56 or PAR 64.
​
For the record, my amazon links are *NOT* recommendations. They are the first things I found that kinda look like the thing I'm talking about.
​
If you're starting to go the PAR route/actual theater lighting route, it may be worth seeing if there is a company you can rent from near you. These folks recently bought the place that I usually rent from, and my one experience with them since the acquisition was pleasant, helpful, and reasonably priced: https://www.4wall.com/ Dunno if they have a location near you, but basic theatrical lights run like under $10 a week to rent.
​
Hope this helps. Happy to answer any more logistical questions too! (Source: Current improv tech and have been involved in lighting & sound for the past 11 years)
Hey! Checking in because I said I'd review your enclosure. You're well on your way to being a great chameleon mom! Just a couple minor changes and you're all set:
The only really major change you need ASAP is the lighting situation. You'll want to replace that double dome light set with a single of the 60w incandescent lights that I linked earlier in your other post. I will like it again here to make it easier for you. . You can use your existing dome if you want, but I recommend you replace it with a wider angle, single dome like this one so it doesn't focus the heat into too small of a spot.
For supplementing, do Mon-Sat of calcium withOUT d3 and alternate on Sundays between the multivitamin and the D3. You shouldn't need to do both a multivitamin and d3 on the same weekend and could build up toxicity eventually.
I'm happy that you're saving up to get her a bigger enclosure! The current layout you have now is wonderful. Just scale that up in the big enclosure and provide her the free range time and she'll be a happy girl! As for her lay bin, I am not well researched on females, so someone else will need to offer wisdom if it's necessary. Perhaps u/MERC399 or u/dexter_jettster would have an opinion?
Dubias are a great staple food. So are black soldier fly larvae, crickets are ok too but high in phosphorus. Wax worms are very fatty and meal worms and super worms have a hard exoskeleton that can be tough on their digestion, so are recommended as treats or to add variety (but not act as staple diet feeders). Hornworms and silkworms make great bonding treats and are loved by chameleons. Silkworms can be a bit tough to find though...
I heard you mention that you have your hornworms in the fridge. I know its recommended to keep them at room temp but would love to know how the fridge has been going for you! What's your fridge temp? Does it help them stay as caterpillars longer before turning into moths? I'm scared to kill them in my fridge 😬.
Where did you get your mister? Can you link it? I'm having the hardest time with my water drip/misting situation because I tried to DIY and totally failed.
Like I said, most important change is the lighting and the supplementation schedule and you're good to go! The lighting really does need to be fixed asap so you don't risk burning her eyes or skin.
Edit: formatting and links.
If you’re looking to go cheap, you can buy one or two of those 10” brooder lamps, and some daylight balanced bulbs. For diffusion, a white garbage bag would do. A white poster board makes a good reflector.
Fluorescent tubes sure have the ideal shape. It's sad they don't have the ideal light output.
I can't really say what intensity is achieved at X distance, but it will be all your plants care about.
The best way to find out is to measure the light intensity with a LUX meter and regulate height of pots and distance to lamp, based on what values you are getting. Peppers will probably like 2-4x intensity compared to what your micros will prefer and that can be regulated by distance. If it's difficult to reach the intensity your pepper(s) will need to thrive, you can always boost with a 9-14w LED household bulb wherever a little extra light is needed. For example, a cheap and simple clamp light, together with a 1500lm LED bulb will provide a good intensity over a 1'x1' area. Those two examples were picked randomly. You can choose whatever brand and kelvin you like.
Since I currently only have a small collection I dont feel the need for a big T5 tube installation and these type of reflectors from amazon are heavily used and recommended on this sub I thought they would be perfect. But its almost impossible to find similar ones in europe for acceptable prices.
I have found one similar in my local pet shop but then its not a clamp light but hanging on a cord from the roof type. And it was rebranded as a reptile lamp for terrariums and had the premium price of 55 usd :O and compared to the 8 usd from amazon or even the 5 usd from walmart it seems like an awful idea.
Appreciate any help!
I didn't know about them either until I saw them on Twitter around Twitchcon 2017 time. I hunted down their booth and managed to snag one before I left :)
As for lighting, I use a cheap clamp reflector light with a soft-white LED Bulb reflected off my wall. It's a little easier and a fair bit cheaper than finding a proper softbox so I don't get washed out from the light.
Yep, one of these, https://www.amazon.com/dp/B01E9IY6US/ref=cm_sw_r_cp_tai_Z3quAb65KMJDQ Figured it something breaks, a replacement bulb would just be $10
You may be able to find cheaper clamp lights, but these are the ones I bought
That could work, but I was thinking something like this https://www.amazon.com/dp/B01E9IY6US/ref=cm_sw_r_cp_api_N.ipzbWW87AP9 like a work lamp, super cheap, but not aesthetically pleasing
I think they are a waste of money myself. i use these
I have a highlight from a while back where i used some cloth to make some soft boxes.
Most of the items you need could be easily found in local hardware/DIY store.
> white light
Matching light bulbs with matching color temperature (Kevin.)
Daylight is 5600k. Get those, or a Kelvin number that is close. Then just set the camera white balance to the light bulbs' setting.
Look for high wattage CFL light bulbs. Higher W than normal home use since you will be diffusing them.
>clamping lamps
2 X clamp light, one on each side.
> rather large items
Extra large items that don't fit in the product softbox can be shot under a seamless white paper backdrop, with white foam boards commonly found in art isle of Walmart as diffusers. A piece of the board usually goes for like USD 5.
You will need a tripod. Don't get the cheapest, since they will break. Get the ones that are slightly more, but no need to sink money on it since you will be doing indoors with little movement. The 60-inch Amazon tripod might just works.
You don't want a 50mm lens since the kit lens will cover everything. Plus 50mm does not offer flexibility when working in a somewhat restrictive environment.
Keep it simple and cheap. Just put the kit lens on the camera, lock it on a tripod, turn on the lights, and bang out the photos.
The trick is to have a good setup, with as few variables between each product as possible. The goal is to minimize your time spent on doing photography, since that's not your business.