For a camping trip this might be of use for you. High CRI and output with onboard charging. It’s about the size of a red bull and uses 3 18650 batteries so it’ll have good runtimes.
This is a fantastic recomendation, OP. You can get it from Amazon too with faster shipping if you're willing to pay a bit more for it.
Look no further 🤗
Sofirn BLF SP36 Rechargeable Flashlight, Brightest 4 LH351D LED 90 CRI Outdoor Search Torch, With 18650 Batteries and USB C Cable (BLF Anduril Version)
https://smile.amazon.com/dp/B07KFDS8ZS/ref=cm_sw_r_cp_api_i_veCtFbMKEC6AD
You might like the Sofirn SP36 BLF Anduril version, or the larger BLF Q8 (not to be confused with the Sofirn Q8, which is cool white rather than neutral white— also an option, but most of us here don’t like cool white because it’s harsh and often blueish). I couldn’t easily find an Amazon.ca link for the Q8, but it’s most likely available somewhere in Canada.
Personally I’d recommend the SP36 because of the versatile user interface, built-in charging, and high-CRI neutral white emitters. It’s not quite 6000 lumens, but I doubt you’d be disappointed by it.
Other potential options that come to mind are the Fireflies E07 if you want a floodier beam, and the Emisar D18 if you can wait for shipping (and maybe stretch your budget slightly for batteries).
The Sofirn BLF SP36 is an excellent 3x 18650 light that's available on amazon.ca. It comes with batteries, has USB C charging built in, high CRI LED's, 5000 lumens max output, and a great user interface.
Sofirn sp36 and it's on sale for only $55.
Only for the next 3 1/2 hours. I have never seen it that cheap on Amazon. I got mine direct from Sofirn for $50 and had to wait 2 months.
if a thrower isn't really what you're looking for, you may want to look into the SP36 Anduril
That's the amazon Canada link, so you can get it relatively quickly, comes with batteries, USB-C charging, great battery life. it's gonna get recommended by someone so I figured I'd do it lol
That's the NarsilM CREE XPL2 LED version 👎
You can instead get the Anduril version with Samsung LH351D LEDs for $69.99 👍
Nice.
In that case I would suggest the Sofirn SP36 BLF Anduril
How about Sofirn SP36 BLF? It's way cheaper than the Fenix, outs out 5000lm on turbo, has an awesome UI, and is available in 2700K, 4000K, and 5000K color temperature with high CRI led's.
Hey mate. Worth looking into the sofirn blf sp36. Less than $70aud on amazon. https://www.amazon.com.au/Powerful-Flashlight-Rechargeable-Neutral-Brightest/dp/B07KFDS8ZS
Won't have as much range as some of the others like the convoy with sbt 90.2.
I've been eyeing both hahah.
This thing? Sofirn SP36 BLF Anduril Rechargeable Flashlight with 4x LH351D Powerful LED 5000K 90 High CRI, REMOVE Insulation Paper in the Head Before Use (SP36 5000k) https://www.amazon.com/dp/B07KFDS8ZS/ref=cm_sw_r_cp_api_glt_fabc_V3N8PH1JVRGZ8EWGK2VD
That's a fantastic light, one of the top favourites in this subreddit.
But this version has better LEDs and a better UI.
I highly recommend it! 👍
Just be aware that it's the size of a Redbull can, just heavier.
Fellow Canadian here 🙂
See the reply from the bot below regarding Olight.
Unless he specifically has a need for a thrower he would probably find something like the Sofirn SP36 more useful.
/u/brokenrecordbot olight
I'm looking at this from the rec thread. https://www.amazon.com/gp/product/B07KFDS8ZS/ref=ox_sc_act_title_4?smid=A2LRZV29F1JQ87&psc=1
I'm just asking about D batteries because the flashlight I have isn't bad at all, it's just older than brand new and happens to take D's, so I plan on keeping it just as a backup or for someone else to use if the situation arises.
There's a coupon right now which makes it $70 CDN including batteries, that's a great deal.
That's way less than what OP paid!
For jacket pocket Sofirn SP36 BLF all the way.
I ran my H600Fd at 562 lumens for about 15 minutes today with no noticeable throttling.
I like to think of throttling this way: A 2xAA LED Mini Maglite will give you ~300 lumens for ~2.5 hours. An 18650 Zebralight will give you ~300 lumens for ~5 hours, with a much nicer beam in every respect, while being smaller and tougher - or, it will give you 1500-2000 lumens briefly when you need it. There are many lights that can maintain 1000 or 2000 lumens for hours without overheating, but they won't fit in your pocket - for example, the $70 Sofirn BLF SP36, which is roughly the size of an 8oz Red Bull can. It's all about mass. Zebralight doesn't currently sell anything bigger than the SC700.
Cool. Well. For 70 bucks on amazon there is a Sofirn/BLF sp36 It is 5,000 lumens, has high cri(color rendering), it is a white tint, is usb c rechargeable. It uses an infinitely adjustable and configurable UI, called Anduril. If you want pocketable with a clip that’s a diff story. And if you want a pencil beam searchlight like the one I. The vid that’s a diff story. And if you want more than 5,000 lumens 😂 You can get 15,000 for 100$ ~
Based on the size and features you're looking for I'd recommend the Sofirn SP36.
It has built-in Type-C charging, comes with batteries so you don't have to worry about nagivating that, and conveniently available on Amazon.
For an awesome larger light (the size of a Redbull can), check out the Sofirn SP36
Crazy power, high CRI, comes with batteries and built-in charging 😎
A smaller light is a bit tougher because the smaller the light, the hotter it gets. But the Wurkkos FC11 is a fantastic light for the price. Again coming with a battery and built-in charging.
The Noctigon K1 is available direct from the manufacturer here with free shipping that takes a month or $18 shipping that takes a week. It's also available here at a slight markup within the US. The W2.2 emitter is recommended for most users. That second site also carries the best battery for it.
The Sofirn SP36 (Specifically the BLF Anduril version, which is the best version) is availible with batteries from Amazon for $71 and is also availible (when in stock) direct from Sofirn for around $50 will shipping that takes about a month.
The Rovyvon A2x and A3x are on Amazon. The Nichia emitter option is preferred.
Hmmm I was going to suggest the FC11 but then I saw that you already have one, so I assume that you want something bigger?
If so check out the Sofirn SP36 or the Wowtac A4V2
You can get it on amazon prime with batteries for $70 here: https://www.amazon.com/Powerful-Flashlight-Rechargeable-Neutral-Brightest/dp/B07KFDS8ZS
However Sofirn frequently have sales and post deals here where you can get it for $50 if you request a promo code from them.
Alternatively, you can buy it for $50+shipping from their website if you're willing to wait several weeks for shipping. This is also the only way to get it in 4000K and 2700K tints as far as I'm aware.
TLDR: SP36 BLF Anduril 4000k with batteries if Anduril is okay with you. Amazon is faster but sofirnlight.com is cheaper.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
I think the Sofirn SP36 BLF could fit in the budget.
Message u/Sofirn for a discount code. It should bring it down to ~49$.
Careful there are like 3 versions of them on Amazon and there’s only one you really want
Edit: it’s this one.
If you can’t wait, buy a SP36 BLF from Amazon. If you can wait until probably early January Get it here for $25 less.
The cells it comes with are good. It has onboard charging so you won’t need a separate charger, and it has Anduril which means you can mess with as much as you want or just have an intuitive ramping UI.
Sofirn SP36 (BLF edition). This has:
These batteries are good, well-priced spares, and you may want an external charger. This one is a good option because it uses USB-C and can use the batteries in it to act as a powerbank so you can top off USB devices from your spare batteries (just remember the bit about only installing batteries in the flashlight in the same state of charge).
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
Sofirn SP36 BLF is probably your best bang for the buck.
TLDR: SP36 BLF Anduril 4000k with batteries if Anduril is okay with you. Amazon is faster but sofirnlight.com is cheaper.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
For a coat pocket: a Sofirn SP36 model, the BLF or SP36S depending on your proclivity for learning. Sometimes as low as $50 with coupon and batteries included.
The brightest thing you can fit in your pants pocket will run you ~$60 - an Emisar D4v2 with XP-L HIs.
An Astrolux MF01 Mini would split the difference.
Edit: added links
Nope. Bad LEDs. You want this one.
Similarly, this version of the Catapult V6 is neutral white, which enthusiasts tend to prefer over the cool white version you linked.
Flashlights are not good at starting fires. There are some that CAN, but none of them are NEARLY as good at it as a simple $3 bic lighter. If you want the fire starting capability for ANY reason other than "I just want to be able to show off to people" then just get a good flashlight and a cheap bic lighter. Also, you won't be able to find any flashlight that will do what you want from a brick and mortar store. They just don't carry enthusiast flashlights.
With that said, the Emisar D4V2 with XPL-HI emitters is one of the fire-startiest lights. It's REALLY excellent in virtually every other way too. However, it does NOT have integrated charging like you're asking for. It also is only available through the manufacturer from china or through a guy in hawaii that resells them on ebay. I had the bot vomit info about it in another comment here.
The Sofirn BLF SP36 might be the right choice for you. Others will have to chime in about it's fire-starting capability, but it outputs almost 6000 lumens in a pretty small space so I suspect it would be able to catch paper on fire. It's availible on Amazon for $71 with batteries and has an integrated USB-C charging port.
A smaller and cheaper alternative is the Sofirn SC31 Pro which retains the UI and USB-C charging port from the SP36. Again, I don't know for sure whether it could start a fire or not but with 2000 lumens I imagine it probably could depending on what you're trying to burn (black construction paper would almost definitely ignite, white paper shreds might not).
Yep. Available with quality batteries and has built-in USB-C charging.
If you’re impatient, it‘s available via Amazon Prime. There’s a 10% off promo running to bring the price down to $64 with batteries.
Sofirn was handing out discount codes for Amazon US in this thread to bring the price with batteries to under $50. Not sure if the deal is still running.
No pocket clip and no lanyard attachment, but a nice light to keep in the house.
The Sofirn SP36 BLF edition would probably fit the bill. USB-C charging, great UI, high CRI 5000k emitters, doesn't throw quite as far as a C8 but it illuminates a much larger area. Amazon link Aliexpress Link
It's quite a bit cheaper on Aliexpress and they have 2 in stock in the US location with batteries.
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
> Are Maglites still good?
Not really. They've been falling behind for quite awhile and are really behind now.
Check out the Sofirn SP36 and the Sofirn SP70 for starters to give you some context. They're both very popular lights on the larger side with similar output. The SP36 is about the size of a soda can, includes batteries and USB-C charging, and comes in a few variants. The one I linked to is the BLF Anduril version which comes with very nice LED's with very good light quality, as well as a really full featured UI called Andúril that features easy basic operation, lots of customization and cool modes. The SP70 is a much bigger light overall that has more reach, but it has a little more of a traditional flashlight shape. It comes with batteries and a charger but the charger isn't built into it light. The LED and UI aren't quite as nice either, but it has some more heft and presence to it if that's what you're looking for.
What do you think about those options? There are plenty more lights I can suggest, but I wanted to give you a good starting point to get some context and let me know what you like and don't like about those options.
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated buy extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: SP36 BLF Anduril 4000k with batteries if Anduril is okay with you. Amazon is faster but sofirnlight.com is cheaper.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: SP36 BLF Anduril 4000k with batteries if Anduril is okay with you. Amazon is faster but sofirnlight.com is cheaper.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
Sofirn SP36 (Anduril kit version)
This Sofirn SP36 is a pretty good place to start. Not super expensive, it includes the batteries, and it has built in charging. It's popular around here.
If by "brightest" you mean "most lumens", the Emisar D18 will do 14,000 lumens for $99. You'll have to buy a separate charger and cells, though, which will put you over budget. It's also mostly floody, and it won't hold 14,000 lumens for long.
For something simpler and better-rounded, try the Sofirn SP36 BLF Anduril. It has a more versatile beam shape and built-in USB-C charging. 6000 lumens may seem like a lot less than 14,000, but the visual difference is smaller than you think, and neither light can sustain much more than 2000lm anyway.
Glad you're open to learning! Anduril is only frustrating for those who can't be bothered. I hope you enjoy it. Lucky for you, Sofirn recently updated the Anduril version shipping in these lights and added C-to-C charging support.
As far as fakes and other such tomfoolery: usually this is constrained to outrageous "10000000000lm" claims and such. Some specific lights are faked - Surefire comes to mind - but Sofirn is frankly not prestigious enough to be worth this kind of effort. They are a very well-respected entry-level budget brand. You're much more likely to accidentally buy the wrong model than you are to get a fake or "chopshop" light.
As for how I know... in that specific instance, I looked closely at the picture and specs, which together contradicted the title. All SP36 models have their name laser-printed on the bezel. But it's up to your judgement to decide which details to trust when the listing is in conflict with itself.
Which website do you plan on buying the light from? You've used "£" and "torch" so I'm guessing you're in the UK somewhere. If you want to be extra safe, you can go to sofirnlight.com, but this Amazon listing should be fine too. The "4000K" option denotes a model with slightly warmer color temperature than the default 5000K - performance should be about the same; it's down to personal preference.
Close, you want this one. Better LEDs and UI.
It sounds like reliability is more important to you than a bunch of bells and whistles. So I think you should check out the Zebralight SC64c LE for your EDC. It's incredibly small for an 18650 light and extremely high quality.
I'm not too familiar with they bigger models so I'm not sure if they even make anything big enough to be a truck light.
Maybe check out the Sofirn SP36 or the Wowtac A4V2
2000lm+ should be capable of starting fires. The Emisar D4v2 is the standard recommendation, but here's a Parametrek list filtered for your parameters. The most efficacious among these options is the Sofirn IF25A @ 3800lm with cool white emitters. However, neither the Emisar nor this Sofirn can be bought on Amazon. You can get Emisars on eBay through this Hawaii-based distributor, at a markup.
On Amazon, the Sofirn SP33 v3.0 or Wowtac A5 are your best bets - or, if you're willing to spend a smidge more, the acclaimed Sofirn SP36. It's often on sale, uses high-CRI emitters and our preferred Anduril UI, and does ~5000lm.
But I've given these recommendations without regard for anything but fire-starting capabilities. Some of these lights may be too large or not pretty enough for your purposes.
Sofirn SP36 BLF edition. Can be had for $50 from their site or AliExpress or for $50 on Amazon with codes. https://www.amazon.com/dp/B07KFDS8ZS/ref=cm_sw_r_cp_apa_i_MbVqFb8D9CRS5
The Sofirn SP36 is a great light for keeping around the house. It runs on three 18650 batteries and is USB-C rechargeable. Excellent user interface, a maximum output of over 5,000 lumens, and a very nice tint with high CRI LEDs. It’s about $70 with batteries on Amazon.
If you want to a spend a lot more, the Imalent MS18 is about $670 on Amazon. It has a maximum output of 100,000 lumens and is quite insane. Here’s a video about it.
There are lots of other options between these two.
What lights does he have already?
What is he gonna be using this new light for?
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
Check out the brand Sofirn. They make very good quality, affordable lights. I have and fully recommend these:
The first one is about the size of a coke can, super bright, and crazy long runtime. The second is a more pocketable option
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
This flashlight is super cool and not likely to disappoint. It’s $52 minus a 10% coupon with free shipping. Shipping is 10-25 days so look for the same light on Amazon if you need it faster (like $20 more) (the most updated version isn’t on Amazon but it’s really close)
Both of the lights have super bright leds, will run for a long time, have built in charging, and the one not on Amazon will even work as a powerbank to charge his phone in a pinch
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
The SP36 can't be a cheap chinese clone, because no flashlight made in the USA comes anywhere close to those specs.
Surefire, Elzetta, Modlite, Malkoff, Cloud Defensive, HDS, and Streamlight are the "made in the USA" manufacturers. And as far as I know, all their handheld lights are in the "~1000 lumen weaponlight" sort of catagory. They just don't make lights with 5k lumens or over a mile of beam distance, or anything like that.
As for heat, modern LEDs can get brighter than the flashlight body can thermally sustain. Some flashlights will just never allow you to make the LED that bright, and you can usually spot these because "...800 extremely bright lumens" will be in the marketing somewhere. But MANY other flashlights will let you run the LED at full power, so it will be substantially brighter. And then once the temperature hits a certain threshold they automatically reduce brightness to prevent overheating.
Sofirn makes good lights. They are definitely a budget maker, so you won't find fancy machining or materials in their lights, but that also means their lights are not hundreds of dollars. The SP36 is a great light, and I've never had mine get too hot to hold. In my opinion, the it has TOO aggressive thermal throttling, since it usually drops brightness long before it's too hot to hold. The Q8 Pro is the bigger brother of the SP36, with longer runtimes and a lot more brightness, but lower color rendering. The SP35 is smaller, and has a more traditional flashlight beam. It also has great regulation, so it holds a flat 800 lumens until the battery dies. If you were going on long walks, this light might be easier to carry than the more soup can sized sp36 or q8. The BLF LT1 is basically a Q8 but a lantern. It's the best lantern on the market by an extremely wide margin. This is the lantern other companies should use as an example if they want to make a good lantern. Many Sofirn lights are available on amazon, but if you're willing to wait a few weeks for shipping, they're usually cheaper directly from Sofirn
If you want a much more premium feeling light, Acebeam is a fantastic company. The K30gt is a great sodacan light that uses the sbt90.2 emitter. This light is WAY overkill for 1/3 of an acre, with 1000m of throw. But that might be a good thing if you want to have a more powerful flashlight than anyone else you know. You'll need to take the batteries out to charge them, but the package I linked on amazon comes with cells and a charger, so you won't need anything else. The L35 would be another good pick for nigh->day lighting from Acebeam, in a smaller form factor than the k30gt.
Worth noting that the Convoy 4x18A with SBT90.2 has nearly identical performance to the K30GT. It's also about half the price, has more battery capacity, and integrated charging on the light, so no need to remove the batteries. The user interface isn't as good as the k30gt, but it still works well. The main issue is it doesn't have any real thermal regulation, so it gets quite hot after extended use on high, unless there is a good breeze blowing on it. It takes a while to get to that point, but you can burn yourself if you really want to. The K30gt also gets hot, especially on the head, but it has a handle so you don't burn yourself, and better thermal regulation. For half the price though, it could be worth remembering to not just turn the 4x18a on max and set it on the table.
How simple does UI need to be? With your budget could do two lights something floody like the Sofirn sp36 and a more throw type light like Sofirn if25A. It over the budget but will cover all his needs.
If you can do without built in charging I think the convoy 4x18a would be perfect. It is on bigger size, soda can size handle don’t know if that’s a deal breaker
High quality Floody light. Going to be zebralight SC700Fd or thrunite TC20
For more budget friendly options Sofirn SP36BLF or Sofirn C8F. Both these can be ordered directly for less if you can wait for them come from China
Code for the SP36 BLF Anduril (the 4x LH351D 5000K) please? The one at amazon.com/dp/B07KFDS8ZS ...Thank you!
Hmm... has anyone mentioned the Sofirn SP36 (BLF version, 5000K yet?
Also squeakydarkness mentioned DC Fix. That's this product specifically if you want the beam to be more diffuse.
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch. The SP36S will charge via a USB C to USB C cable.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables don't work. The SP36S is known to have C-C charging, but other models are more unknown. Make a post telling us if your SP36 has C-C charging. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
Recently, some SP36's have had one big black paper circle to cover the batteries instead of 3 small ones.
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
TLDR: Get the SP36 BLF Anduril 4000k if you're okay with a complicated but extremely capable user interface. Amazon is faster but sofirnlight.com is cheaper. Get the kit version of the light if you don't already have 18650 batteries. Lastly, if you want a simple user interface, get the SP36S version.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
It's a solid light. There are some other options you should consider though.
First is the Sofirn SP36 BLF Anduril. It's a similar form factor but it's much cheaper and it has a more feature-rich user interface. It has higher quality LED's too, but it doesn't get quite as bright. It can be had on Amazon if you want fast shipping or from Sofirn if you want to save some cash.
The Astrolux MF01S is also an excellent option, especially if you want maximum lumens. It's got the same UI as the SP36, but it's a little bigger and brighter. The 4000K emitter option puts out about as much light as the Thrunite you're considering but it's with much higher quality LED's. The 5000 and 6500K options can put out up to 15,000 lumens and those LED's are on par with the ones in the Thrunite. It has glowing auxiliary emitters that look really cool and it's availible in several colors. This one needs four batteries and a charger that need to be purchased separately.
TLDR: SP36 BLF Anduril 4000k with batteries if Anduril is okay with you. Amazon is faster but sofirnlight.com is cheaper.
The sofirn SP36 is a soda can sized light that runs off 3 18650 button top batteries, having 4 emitters and has many variants. It is a floody light, doesn’t have a tight hotspot and don’t expect to see much more than 200ish meters away with even the Pro. The size gives it enough thermal mass to run for a good while compared to smaller lights. The 3x 18650 batteries give it some serious runtimes too and with that comes a long charging time if you use the built in charger.
The SP36S uses 4 Samsung LH351D emitters with a max of 5200 lumens and uses a simple, proprietary UI (user interface, meaning how the button controls the light) the details of which can be found through the link. The UI is a good option if you don’t want to have to learn the other two somewhat complicated UI. The sofirn site only has a 5000k temp available for this model. Usually the cheapest of the bunch.
The SP36 BLF Anduril uses 4 of the same LH351D with a max output boosted to 5600 Lumens and 90 CRI (meaning colors look significantly less washed out and more color accurate as seen here) available in 5000k, 4000k and 2700k. What does that mean? Well each of these is a color temperature, 2700k being a very warm orange light, 4000k being a warm white, 5000k being a cool white and 6500k being a cold blueish white. This one has all the really nice color options, 4000k is an easy recommendation and many love the 2700k, but it's all up to preference. Back to BLF Anduril, great color temps, high CRI and the flexible yet complicated anduril UI (instruction diagrams 1, 2 ) make this one a common recommendation for those looking to dive into enthusiast grade lights and a favorite among the community.
The SP36 BLF Narsil which uses 4 Cree XPL2s, gives you 6000 lumens, only comes in 5500k, and uses NarsilM V1.3 for its UI. Narsil is a similar UI to Anduril but Anduril is more common.
There is also theSP36 Pro. This light gives you 8000 Lumens from 4 Luminus SST-40s available in 6500k or 5000k and uses Anduril UI like the BLF Anduril. It is the brightest in the list, but it's not as significant as the numbers may make it appear. 8000 lumens and it still has the versatile Anduril UI, but it doesn’t bring any warmer color temps. It is sometimes a bit more expensive than the others but not by much.
There are a ton of options here, the SP36S is usually cheaper on the Sofirn site, but the other 3 are often very similarly priced. They are also often available on amazon for a decent markup but quick and free shipping for prime members. The most popular seems to be the BLF Anduril, because of the great CRI, good brightness and some nice, warm color temp options along with the in depth and beloved Anduril UI.
Even if you already have 18650s I definitely recommend getting the kit with batteries. The 3000mah 18650s are surprisingly decent and the difference in price for the kit with batteries is usually much cheaper than buying them yourself. If you want to use your own 18650s then they will take button top 18650s with at least 6.4A of continuous discharge
While they all seem to be constructed in the same body and the same manner, the Ingress protection ratings vary from IPX7 to IPX8 depending on the model, but both ratings mean they can be submerged in water for a short time as long as the o rings have not failed but it is not recommended. They come with extra o rings in case they break.
All the versions come with an electronic side switch with an aux led inside. This means there will be some parasitic drain, but the 3 18650s have a lot of capacity and the drain isn’t significant. You can change the behavior of the aux between low, high, blinking and off.
All the versions have integrated charging via usb-c. The kit with batteries also comes with a usb 3A to C cable for charging. It seems most usb C to C cables dont work. The port for charging is opposite of the e switch and covered by a heavy rubber stopper. It works fine but it is an obvious failure point if the stopper breaks or isn’t properly inserted.
You should consider doing a thermal calibration as from the factory many can be weirdly calibrated. Guide found here
When it finally comes in, you must remember to take the stickers off the negative terminals of each battery as seen here
originally written by u/That1GuyYouKn0w
^(I AM A BOT. PM WITH SUGGESTIONS AND CONTRIBUTIONS. SEE MY) ^(WIKI) ^(FOR USE.)
Deal link: Amazon
Category-wise subreddits for Amazon Deals:
Is your reddit feed getting flooded with deals for products you are not interested in? Below are our category-wise subreddits where I crosspost from the main sub.
Category | Subreddit |
---|---|
Electronics | /r/Deals_Electronics |
Computers and Accessories | /r/Deals_Computers |
Video Games | /r/Deals_VideoGames |
Home Improvement | /r/Deals_HomeImprovement |
Clothing and Accessories | /r/Deals_Apparel |
Grocery | /r/Deals_Grocery |
Discord Server: Instant deal notifications on our Discord Server!
Amazon Canada Deals: /r/OnlineDealsCanada
Disclaimer: The deal links are affiliated. We may earn a small share on qualifying purchases. It does not affect the deal price in any way.
What's your definition of "pocket" flashlight? If I want something that'll fit comfortably in a jeans pocket, I'd grab the ZebraLight SC64c LE. If I'm going for a walk and am going to be holding the flashlight most of the time or maybe occasionally putting it in a coat pocket, I'd take a ZebraLight SC700d, Emisar D4SV2, or Sofirn SP36 BLF.
$56.79 for Sofirn SP36 BLF Anduril kit on amazon US!
Date: Jan 4, 2021 2:20 PM PST - Jan 4, 2021 8:20 PM PST
~~https://www.amazon.com/4Samsung-Flashlight-Rechargeable-batteries-included/dp/B07KFDS8ZS?th=1~~
​
Nvr mind, saw it's not shipping until 23 Dec
This is the best light you can get for the money. It is what you need. Very bright, flood. https://www.amazon.com/dp/B07KFDS8ZS/ref=cm_sw_r_cp_apa_fabc_u-hUFbS0656Q8
$63 on amazon, less than I paid with the coupon https://www.amazon.com/dp/B07KFDS8ZS/ref=cm_sw_r_cp_apa_fabt1_o.kUFb1R5DXTM
I had a look on Amazon AU and the only one of these three I could find was the SP36 Andúril, sold by Sofirn-AU for $80 AUD.
The next cheapest bright flashlight I found was this Lumintop EDC18 sold by Lumintop-AU Direct, though it's only $10 cheaper than the more powerful SP36 which would kick its ass. The EDC18 is very small though, in case you'd like something to carry in your pocket often. There's also the Lumintop FW3A on there, which has identical internals but uses a tail switch instead of a side switch if you prefer that.
Don't get that one. It costs a bit more, but the SP36 BLF Anduril version is far superior. Better UI and better LEDs.
That was going to be my suggestion as well. Here's a link to Sofirn's website where you can get it for $50 with batteries. 5-6000lumens with plenty of throw. Lots of battery capacity so it'll run for a long time, and easy recharging with the built in USB-C port.
It's worth noting that the UI on this light called "Andúril" is arguably the best flashlight UI out there. It's super easy to use for basic operation (one click for on, one click for off, hold while on to change modes). One of the best things about it is it offers a LOT of configuration and fancy modes but that can get a little confusing so if you do get this light, read the manual and/or watch some YouTube videos on how to use Anduril.
Since the Sofirn link is currently out of stock, here's the Amazon link. It's more expensive ($70) but it's in stock and shipping will be fast.
The specs you named are (tl;dr) a moonshot, even with your budget. Take a look at the Sofirn BLF SP36 and tell us what you think. It's hard to imagine you buying this light and being dissatisfied.
Caveat: no magnet, so not great for working on the car. You said you'd rather own one quality light than several cheap ones, but with your budget, perhaps consider two? No flashlight can truly "do it all", but a mid-sized thrower and a quality headlamp will meet almost every need. If it were me, I'd go with the Zebralight combo: an SC700d (yeah, technically not a thrower) and an H600Fd, to which a magnet can be added. The pair is refined, reliable, efficient, and would run you about $210 before batteries and charger. I'm happy to put together a few other pairings if you have other criteria.
As far as the details of your moonshot:
"Max output" means turbo - no matter how many lumens it is, no light can maintain its turbo for an hour. More likely the number you saw means the light hits the advertised output briefly, steps down, and runs at a lower brightness for an hour. The point of turbo is to max out LED and battery performance in short bursts, which generates an unsustainable amount of heat. If the light can maintain 15000 lumens for an hour without stepping down, it has the thermal mass to have a higher turbo.
But I can't think of what light that would be. An Imalent DX80 can supposedly do ~5000 lumens sustained. Maybe the fan-cooled ~$700 MS18 can sustain 15000 lumens, but there are plenty of reasons not to buy that light.
But you say you want the "best thrower flashlight" - if that were the case, you need high candela, not high lumens. For example, the Weltool W4 laser-excited phosphor flashlight has a range of 1.65 miles with an output of 560 lumens, because all that light is concentrated in a very tight spot. But a light like that will be useless for around the house, camping, or working on the car.
Sofirn SP36 if you want a convenient all in one package from Amazon.
Emisar D4SV2 if you want a badass enthusiast light with all the bells and whistles.
$50.99 at Amazon Black Friday, earliest delivery is 12/26.
Thanks for your generosity! Sofirn BLF SP36 https://www.amazon.com/dp/B07KFDS8ZS/ref=cm_sw_r_cp_api_i_i-1UDb3DHHGP7
Sweet! My choice will be BLF SP36 with batteries.
Love the site... https://www.amazon.com/gp/product/B07KFDS8ZS
Light it up! Thanks!
Thanks for the giveaway! Would love to enter for the SP36.
I’d love to get a Sofirn BLF SP36