What is Reddit's opinion of Swigzy Car Cup Holder Expander Adapter (Adjustable) - Fits Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks?

From 3.5 billion Reddit comments

I bought these things from Amazon. Not the greatest as they move a little (not a lot) but they get the job done. I had to put a small block of timber in the front cup holder to alter the alignment so I could fit two in the existing spot. If you only need one then that won't be necessary.

Swigzy Car Cup Holder Expander Adapter (Adjustable) - Fits Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_cp_api_i_DHAXG43XWB7CJD03A0Q0

Wife bought me that for Christmas. I keep it in the cup holder behind the center console. Works perfectly for nalgenes.

You can find adapters online. Essentially, it sits snugly in the existing cupholder and adds a large cupholder on top of it.

Example: https://www.amazon.com/Swigzy-Holder-Expander-Adapter-Adjustable/dp/B0752DZ1SB

Note: I've never bought one of these, so I cannot vouch for them. Just something I came across before.

Maybe one of these guys?

Swigzy Car Cup Holder Expander Adapter (Adjustable) - Fits Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_apan_glt_i_YDD9XWNAXF538AXEXGBC

Or it looks like there are similar models on thingaverse if you have a 3d printer.

Thinking about one of these myself now 🙂

I found this cup holder extremely useful for nalgenes - Swigzy Car Cup Holder Expander Adapter (Adjustable) - Holds Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_cp_api_glt_fabc_2MDMVA0Q39A6X70H1KAF?_encoding=UTF8&psc=1

I was looking at something like this Swigzy Car Cup Holder Expander Adapter (Adjustable) - Holds Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_apan_glt_fabc_1557ZHGWKF9CSYE4J7NK?_encoding=UTF8&psc=1

I use this one for my water bottles but it also does a great job of holding coffee mugs and different shaped glasses. Highly recommend it!

Swigzy Car Cup Holder Expander Adapter (Adjustable) - Holds Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_cp_api_glt_fabc_WBAAQRXSAE1PGVRQ6102?_encoding=UTF8&psc=1

Lmaooooo I try not to ever have trash in my ST but it usually goes on the passenger floor mat until I get gas and throw things away.

My sister got me a Swigzy cup holder expander and it's quickly become a life saver! It fits my huge water bottle, and in your case it would help you fit more trash! 😂

I ordered a couple of these to hold the kid’s hydro flasks: Swigzy Car Cup Holder Expander Adapter (Adjustable) - Holds Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_cp_api_glt_fabc_08XERBRPD1FN1T57H40Q?_encoding=UTF8&psc=1

I just bought [this](Swigzy Car Cup Holder Expander Adapter (Adjustable- Holds Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_cp_api_glt_fabc_BE02CPG4HWTMZENQGZAB?_encoding=UTF8&psc=1) off Amazon and it is perfect for my big water bottle. I was tired of having a projectile bouncing around my car 😂

Nah, not a specific one, the one I bought recently was too large to fit the cups I usually have along and I haven't picked up a new one, but you basically just want one that has an expandable base like this one does so that you can tighten it in place nicely

https://www.amazon.com/Swigzy-Holder-Expander-Adapter-Adjustable/dp/B0752DZ1SB

Game... blouses

try this

Swigzy Car Cup Holder Expander... https://www.amazon.com/dp/B0752DZ1SB?ref=ppx_pop_mob_ap_share

Amazon Basics Car Cup Holder... https://www.amazon.com/dp/B08L9GWSPB?ref=ppx_pop_mob_ap_share

my mother in law got me this for Christmas, maybe this will help? https://www.amazon.com/Swigzy-Holder-Expander-Adapter-Adjustable/dp/B0752DZ1SB/ref=sr_1_5?keywords=cup%2Badapter&qid=1662040923&sr=8-5&th=1

https://www.amazon.com/gp/product/B0752DZ1SB

Got this thing a while back for my big Hydroflask and it's great, FWIW.

Swigzy Car Cup Holder Expander Adapter (Adjustable) - Fits Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks

https://www.amazon.com/gp/product/B0752DZ1SB/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1

I have this expander to fit my hydroflask, it's pretty great.

its this!
https://www.amazon.ca/gp/product/B0752DZ1SB/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&psc=1

Yes there are adapters. This is what I use and it's perfect for 26 & 36 oz ramblers.

https://www.amazon.com/Swigzy-Holder-Expander-Adapter-Adjustable/dp/B0752DZ1SB

I have this in my Volvo and it works well

Swigzy Car Cup Holder Expander... https://www.amazon.com/dp/B0752DZ1SB?ref=ppx_pop_mob_ap_share

I have this in my Volvo and it works well

Swigzy Car Cup Holder Expander... https://www.amazon.com/dp/B0752DZ1SB?ref=ppx_pop_mob_ap_share

Nice! This is what I use and it works great

 

^Item Info | Bot Info | Trigger

Swigzy Car Cup Holder Expander Adapter (Adjustable) - Holds Hydro Flask, Yeti, Nalgene, Large 32/40 oz. Bottles & Big Drinks https://www.amazon.com/dp/B0752DZ1SB/ref=cm_sw_r_cp_api_glt_fabc_JCTYJHPTZJYGQNGNWHQY

Also consider the Swigzy cupholder insert that also works for many large bottles like nalgenes.

LMAO

Hey! If Toyota wanted our money they could have made it themselves! XD

As per the cupholder, it's this one

10/10 would recommend and buy again. Thing is incredible. Massive thermos and Evian bottles fit without issues. Mason jars and stuff even. Highly sturdy and firm too, not cheap feeling. Here it is if you are interested :)

Swigzy Car Cup Holder Expander... https://www.amazon.ca/dp/B0752DZ1SB?ref=ppx_pop_mob_ap_share

Also recommend the base grips - they reduce noise from stuff in the compartments, can match car colour too!!

CupHolderHero for Toyota Corolla... https://www.amazon.ca/dp/B07RCYK6GK?ref=ppx_pop_mob_ap_share

Did you ever figure this out? I hate these damn cupholders they are way to small.

I tried this and it definitely doesn't fit: https://www.amazon.com/gp/product/B0752DZ1SB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

any generic cup holder adapter is fine. https://www.amazon.com/Swigzy-Holder-Expander-Adapter-Adjustable/dp/B0752DZ1SB

I currently have this:

Camelbak Mag 50oz

With this cupholder adaptor Which works but its super tight and sometimes pulls out the whole thing when grabbing the bottle.

Thoughts on if yours would work for that 50oz Camelbak? I think you said inside of yours is 96mm?