Had the bins and paid $13 for the screen. Used a heated knife to cut the bin. Hot glue gunned the screen on and attached blocks to the side so it sits just above the bottom bin! Harvesting in a couple of weeks and looking forward to seeing how much kief we get!
TIMESETL 304 Stainless Steel Woven Wire 120 Mesh - 12"X40" Filter Screen Sheet Filtration Cloth https://www.amazon.com/dp/B07L1LLV63/ref=cm_sw_r_cp_api_glc_fabc_Rl7-FbDDJCKDA?_encoding=UTF8&psc=1
Hey Minty! Thank you so much for taking the time to help me out :)
Here’s the link to the mesh:
TIMESETL 304 Stainless Steel Woven Wire 120 Mesh - 12"X40" Filter Screen Sheet Filtration Cloth https://www.amazon.com/dp/B07L1LLV63/ref=cm_sw_r_cp_api_i_BY4J1DG901KM1Q5Y3CS4?_encoding=UTF8&psc=1
Hey Minty! Thank you so much for taking the time to help me out :)
Here’s the link to the mesh:
TIMESETL 304 Stainless Steel Woven Wire 120 Mesh - 12"X40" Filter Screen Sheet Filtration Cloth https://www.amazon.com/dp/B07L1LLV63/ref=cm_sw_r_cp_api_i_BY4J1DG901KM1Q5Y3CS4?_encoding=UTF8&psc=1
Had the bins and paid $13 for the screen. Used a heated knife to cut the bin. Hot glue gunned the screen on and attached blocks to the side so it sits just above the bottom bin! Made a second one out of some cardboard boxes we had. Harvesting in a couple of weeks and looking forward to seeing how much kief we get from trimming on these!
TIMESETL 304 Stainless Steel Woven Wire 120 Mesh - 12"X40" Filter Screen Sheet Filtration Cloth https://www.amazon.com/dp/B07L1LLV63/ref=cm_sw_r_cp_api_glc_fabc_Rl7-FbDDJCKDA?_encoding=UTF8&psc=1
The Trim bin looks nice, but is it possible to make one myself, using mesh like this? https://www.amazon.com/TIMESETL-Stainless-Steel-Woven-Wire/dp/B07L1LLV63/ref=sr_1_17?crid=1O1ZDNWEIW7QF&dchild=1&keywords=150%2Bmicron%2Bscreen&qid=1620690791&sprefix=150%2Bmicron%2Caps%2C250&sr=8-17&th=1
Get two of these bins cut out the bottom of one and staple the screen on then stack lol hope this helps https://www.homedepot.com/p/Sterilite-30-Qt-Latch-Storage-Box-19858606/204724998
It looks like you have a good basic set-up. This is the mesh I use:
https://www.amazon.com/gp/product/B07L1LLV63/
I have heard 304 gives a quicker burn, most of the pre rolled stuff is 316.
The rule I use is the mesh should glow faintly in a completely dark room. What it will likely do is get a quick peak glow and then will dim down to a faint barely noticeable glow.
The idea is to get a quick pulse of heat that will melt the DMT and then provide enough heat to get a good quick vaporization. Something most won't tell you is that there is no vaporization temp where you will get zero DMT breakdown. The trick is to find the sweet spot where you minimize decomposition and maximize vapor production.
FYI 30mg of pure product is more than enough to blast off in a e mesh set up.
I also have the Aegis Geek Vape Mod, here are my current settings (with the 304 SS)
I have found I need to slowly bump up the TCR as the mesh cokes up.
Once I come back from a trip I also do a little maintenance. First I will do 2 10 second burns at my normal settings to see how much I left behind. Second I will turn it up all the way to 315 and do several 3-5 second burns while giving enough time for it to cool down between burns.
Best of luck!
I use the Geekvape Aegis Solo and the Vandy Vape Mesh RDA. The mod you use is important, you can use any RDA you want as long as it takes mesh.
It going to run you a little less than 100 dollars, less if you can find a sale.
This is the steel I use:
https://www.amazon.com/gp/product/B07L1LLV63/
​
These instruction won't do you wrong:
https://www.dmt-nexus.me/forum/default.aspx?g=posts&t=92213
It may seem complicated, but it is easier than building "the machine" and way easier than any extraction Tek.
Getting the temps set up with TCR can be a little finicky so do 10-15mg on your first test.
Once you got it zeroed in, load up 25-30mg and blast off.